This book contains the proceedings of a NATO Advanced Study Institute entitled "Characterization of Crystal Growth Defects by X-ray Methods' held in the University of Durham, England from 29th August to 10th September 1979. The current interest in electronic materials, in particular silicon, gallium aluminium arsenide, and quartz, and the recent availability of synchrotron radiation for X-ray diffraction studies made this Advanced Study Institute particularly timely. Two main themes ran through the course: 1. A survey of the various types of defect occurring in crystal growth, the mechanism of their different methods of generation and their influence on the properties of relativelY perfect crystals. 2. A detailed and advanced course on the observation and characterization of such defects by X-ray methods. The main emphasis was on X-ray topographic techniques but a substantial amount of time was spent on goniometric techniques such as double crystal diffractometry and gamma ray diffraction. The presentation of material in this book reflects these twin themes. Section A is concerned with defects, Section C with techniques and in linking them. Section B provides a concise account of the basic theory necessary for the interpretation of X-ray topographs and diffractometric data. Although the sequence follows roughly the order of presentation at the Advanced Study Institute certain major changes have been made in order to improve the pedagogy. In particular, the first two chapters provide a vital, and seldom articulated, case for the need for characterization for crystals used in device technologies.

X-Ray Diffraction Topography presents an elementary treatment of X-ray topography which is comprehensible to the non-specialist. It discusses the development of the principles and application of the subject matter. X-ray topography is the study of crystals which use x-ray diffraction. Some of the topics covered in the book are the basic dynamical x-ray diffraction theory, the Berg-Barrett method, Lang’s method, double crystal methods, the contrast on x-ray topography, and the analysis of crystal defects and distortions. The crystals grown from solution are covered. The naturally occurring crystals are discussed. The text defines the meaning of melt, solid state and vapour growth. An analysis of the properties of inorganic crystals is presented. A chapter of the volume is devoted to the characteristics of metals. Another section of the book focuses on the production of ice crystals and the utilization of oxides as laser materials. The book will provide useful information to chemists, scientists, students and researchers.

The rapid growth in the applications of electronic materials has created an increasing demand for reliable techniques for examining and characterizing these materials. This book explores the area of x-ray diffraction and the techniques available for deployment in research, development, and production. It maps the theoretical and practical background necessary to study single crystal materials using high resolution x-ray diffraction and topography. It combines mathematical formalism with graphical explanations and hands-on advice for interpreting data, thus providing the theoretical and practical background for applying these techniques in scientific and industrial materials characterization

This book contains the proceedings of a NATO Advanced Study Institute entitled "Characterization of Crystal Growth Defects by X-ray Methods' held in the University of Durham, England from 29th August to 10th September 1979. The current interest in electronic materials, in particular silicon, gallium aluminium arsenide, and quartz, and the recent availability of synchrotron radiation for X-ray diffraction studies made this Advanced Study Institute particularly timely. Two main themes ran through the course: 1. A survey of the various types of defect occurring in crystal growth, the mechanism of their different methods of generation and their influence on the properties of relativelY perfect crystals. 2. A detailed and advanced course on the observation and characterization of such defects by X-ray methods. The main emphasis was on X-ray topographic techniques but a substantial amount of time was spent on goniometric techniques such as double crystal diffractometry and gamma ray diffraction. The presentation of material in this book reflects these twin themes. Section A is concerned with defects, Section C with techniques and in linking them. Section B provides a concise account of the basic theory necessary for the interpretation of X-ray topographs and diffractometric data. Although the sequence follows roughly the order of presentation at the Advanced Study Institute certain major changes have been made in order to improve the pedagogy. In particular, the first two chapters provide a vital, and seldom articulated, case for the need for characterization for crystals used in device technologies.

Linking of materials properties with microstructures is a fundamental theme in materials science, for which a detailed knowledge of the modern characterization techniques is essential. Since modern materials such as high-temperature alloys, engineering thermoplastics and multilayer semiconductor films have many elemental constituents distributed in more than one phase, characterization is essential to the systematic development of such new materials and understanding how they behave in practical applications. X-ray techniques play a major role in providing information on the elemental composition and crystal and grain structures of all types of materials. The challenge to the materials characterization expert is to understand how specific instruments and analytical techniques can provide detailed information about what makes each material unique. The challenge to the materials scientist, chemist, or engineer is to know what information is needed to fully characterize each material and how to use this information to explain its behavior, develop new and improved properties, reduce costs, or ensure compliance with regulatory requirements. This comprehensive handbook presents all the necessary background to understand the applications of X-ray analysis to materials characterization with particular attention to the modern approach to these methods.

Over the years, many successful attempts have been chapters in this part describe the well-known processes made to describe the art and science of crystal growth, such as Czochralski, Kyropoulos, Bridgman, and o- and many review articles, monographs, symposium v- ing zone, and focus speci cally on recent advances in umes, and handbooks have been published to present improving these methodologies such as application of comprehensive reviews of the advances made in this magnetic elds, orientation of the growth axis, intro- eld. These publications are testament to the grow- duction of a pedestal, and shaped growth. They also ing interest in both bulk and thin- lm crystals because cover a wide range of materials from silicon and III–V of their electronic, optical, mechanical, microstructural, compounds to oxides and uorides. and other properties, and their diverse scienti c and The third part, Part C of the book, focuses on - technological applications. Indeed, most modern ad- lution growth. The various aspects of hydrothermal vances in semiconductor and optical devices would growth are discussed in two chapters, while three other not have been possible without the development of chapters present an overview of the nonlinear and laser many elemental, binary, ternary, and other compound crystals, KTP and KDP. The knowledge on the effect of crystals of varying properties and large sizes. The gravity on solution growth is presented through a c- literature devoted to basic understanding of growth parison of growth on Earth versus in a microgravity mechanisms, defect formation, and growth processes environment.