Wood-based materials are CO2-neutral, renewable, and considered to be environmentally friendly. The huge variety of wood species and wood-based composites allows a wide scope of creative and esthetic alternatives to materials with higher environmental impacts during production, use and disposal. Quality of wood is influenced by the genetic and environmental factors. One of the emerging uses of wood are building and construction applications. Modern building and construction practices would not be possible without use of wood or wood-based composites. The use of composites enables using wood of lower quality for the production of materials with engineered properties for specific target applications. Even more, the utilization of such reinforcing particles as carbon nanotubes and nanocellulose enables development of a new generation of composites with even better properties. The positive aspect of decomposability of waste wood can turn into the opposite when wood or wood-based materials are exposed to weathering, moisture oscillations, different discolorations, and degrading organisms. Protective measures are therefore unavoidable for many outdoor applications. Resistance of wood against different aging factors is always a combined effect of toxic or inhibiting ingredients on the one hand, and of structural, anatomical, or chemical ways of excluding moisture on the other.

This book is primarily a general text covering the whole sweep of the forest industries. The over-riding emphasis is on a clear, simple interpretation of the underlying science, demonstrating how such principles apply to processing operations. The book considers the broad question "what is wood?" by looking at the biology, chemistry and physics of wood structure. Wood quality is examined, and explanations are offered on how and why wood quality varies and the implications for processing. Finally, various "industrial processes" are reviewed and interpreted. All chapters have been written by specialists, but the presentation targets a generalist audience.

This book offers a broad range of options for technically adapting, handling and processing wood with specific wood characteristics. It starts by discussing wood anatomy and the general factors leading to the formation of wood characteristics. The individual characteristics are then categorized into four groups: 1. Wood characteristics inherent in a tree’s natural growth. 2. Biotically-induced wood characteristics. 3. Abiotically-induced wood characteristics. 4. Types and causes of cracks. New to this English edition is a comparison of wood characteristics found in trees from the boreal, temperate and tropical climate zones. The results show a clear relationship between the effects of sunshine duration, the vertical and horizontal angle of radiation, and crown coverage and the way wood characteristics form. The book addresses all those who work with wood professionally: foresters, gardeners and arborists who want to be able to observe a living tree and identify its internal features and the causes of its prominent wood characteristics. Based on the findings described in this book they can determine how to avoid certain undesirable characteristics, or alternatively how to promote favorable ones as the tree and stand grow. Botanists and dendrologists will learn how wood characteristics arise, and how they affect living trees and wood products. The needs of wood technologists seeking to prevent adverse wood characteristics from influencing wood processing, or to enhance favorable wood characteristics, are also addressed.

Wood-plastic composite (WPC) is a non-recyclable composite material lumber or timber made of recycled plastic and wood wastes which has become one of the most dynamic sectors of the plastics industry in this decade. It is used in numerous applications, such as, outdoor deck floors, railings, fences, landscaping timbers, park benches, window and door frames. This book starts with a brief glimpse at the basic structures and properties of WPCs. Aspects such as surface treatment, machinery used and testing types of WPCs are also covered. The following chapters of the book give a view of foam technology, flame retardant properties and colour retardant properties of WPCs. The way morphology affects or controls the physical and mechanical behaviours of the finished materials is discussed. Finally, the authors give an overview of the applications of wood-plastic composites in daily life. The book may serve as a source book for scientists wishing to work in this field.

For nearly 60 years, Timber: Structure, Properties, Conversion, and Use has been the authoritative text on timber technology. Now in its seventh edition, this book remains a vital resource, providing accurate, comprehensive, and fact-driven information for students and professionals in the field. From basic coverage of timber structure, properties, processing, and utilization, to more in-depth scientific investigations, this book covers all the issues and topics of concern to readers with a wide range of levels of sophistication. Timber technology has not stood still since the last revision; Timber: Structure, Properties, Conversion, and Use has kept the pace, exploring such high-tech topics as computer-aided wood identification and log conversion, radio frequency drying of wood, enhancement of wood with plastics, application of preservatives with high-pressure vacuum systems, and the development and application of flame-retardant solutions. Other timely updates include enlarging the chapter on mechanical performance to cover elastic behavior, toughness, and the use of structural-sized timber for strength tests. The chapter on board materials has also been extensively updated and enlarged to include information on new boards and structural composites that have emerged since the last edition. One of the most important strengths of Timber: Structure, Properties, Conversion, and Use is its versatility as a reference for timber professionals while remaining approachable to students in the field. Evidence of the book?s comprehensiveness and versatility becomes clear as it teaches readers about such wide-ranging topics as: identification and nomenclature of timbers variability in cellular features between species principal chemical constituents in timber structural variability caused by natural defects such as bark pockets, resin streaks, and brittleheart determination of density and moisture content in timber thermal and acoustic properties of wood conversion equipment such as circular saws, band saws, frame saws, and chipper canters health and safety issues in the industry adhesives, metal connectors, and joint design forest and millyard pests application of preservatives and finishes From basic identification and timber nomenclature to methods of sap displacement and tests of electrical conductivity, Timber: Structure, Properties, Conversion, and Use covers it all. And while it is no longer possible for any one individual to write authoritatively on every aspect of timber technology, embracing as it does structure, properties, conversion, utilization, and behavior in service, J. M. Dinwoodie has gathered expert opinions and expanded on original author H. E. Desch?s approach and vision to continue to provide the authoritative text on timber technology.

Wood is the usual end product of a forestry operation. Because of its importance, numerous studies have been made relative to wood prop erties, the causes of wood variation, and how best to develop wood for desired products. There is voluminous literature related to these subjects, but it is neither well known nor appreciated by foresters because the publications are often not available or are not well understood by the forester or by those who use the wood. Frequently, the literature is confusing and contradictory, making it difficult for the nonspecialist to use what information is available. In order to produce and use wood efficiently, the variation pat terns within trees, among trees within species, and among species must be understood. This also requires some knowledge of the causes of variation and the effects of different wood properties upon utiliza tion. The information about variation patterns, their causes, and con trol and effect upon the product must be known by the tree grower, the tree breeder, and the tree harvester as well as by those who ultimately convert wood into a final, salable product.

Recent progress in enhancing and refining the performance and properties of wood composites by chemical and thermal modification and the application of smart multi-functional coatings have made them a particular area of interest for researchers. Wood Composites comprehensively reviews the whole field of wood composites, with particular focus on their materials, applications and engineering and scientific advances, including solutions inspired biomimetrically by the structure of wood and wood composites. Part One covers the materials used for wood composites and examines wood microstructure, and wood processing and adhesives for wood composites. Part Two explores the many applications of wood composites, for example plywood, fibreboard, chipboard, glulam, cross-laminated timber, I-beams and wood-polymer composites. The final part investigates advances in wood composites and looks at the preservation and modification of wood composites, environmental impacts and legislative obligations, nano-coatings and plasma treatment, biomimetic composite materials, the integration of wood composites with other materials and carbonized and mineralized wood composites. - Comprehensively reviews the entire field of wood composites in a single volume - Examines recent progress in enhancing and refining the performance and properties of wood composites by chemical and thermal modification and the application of smart multi-functional coatings - Explores the range of wood composites, including both new and traditional products