The growing issue of power-grid congestion and a global increase in disturbances have emphasized the need to enhance electrical power networks using Wide Area Monitoring, Protection, and Control (WAMPAC). This is a cost-effective solution for improving power system planning and operation. In addition to these existing issues, the Great Britain (GB) power system is facing significant changes, in terms of both power transmission technology and the nature of the generation mix, that will cause the operation of the future GB power system to become more unpredictable and complex. Therefore, developing a WAMPAC system will be essential to enhance the stability and optimise the operation of the future GB power system. The main objectives of the research presented in this thesis are to design a GB WAMPAC system and develop solutions to overcome the challenges that will be involved in the initial stage of the GB WAMPAC project. As Synchronized Measurement Technology (SMT) is the most essential element and enabler of WAMPAC, this thesis first provides a study of SMT and its applications. This study also reviews the state of the art of these SMT applications, and worldwide experience with the operation of WAMPAC in terms of system architecture, communication technologies and data management. After the basic study of WAMPAC, this thesis presents a new methodology for designing a roadmap that will ensure the future GB WAMPAC system will be developed in a logical and economic manner. This methodology takes into account the international experience with WAMPAC project management and the practical challenges faced in the future GB power system. With this new methodology, the GB strategies for the development of WAMPAC are devised. Two major SMT applications are then developed that can form main parts of the proposed future GB WAMPAC system. These applications are developed to enhance the small signal stability of the future GB power system.1. Wide Area Inter-area Oscillation Monitoring using Newton Type Algorithm.2. Wide Area Inter-area Oscillation Control using Power Electronic Devices. Finally, the operation of a proposed GB WAMPAC system is demonstrated using the DIgSILENT software package. The proposed real time applications are tested and evaluated using dynamic simulations of a full GB power system model. In addition, some key factors that will influence the operation of the future GB WAMPAC system will be analyzed and discussed.

Wide area monitoring, protection and control systems (WAMPACs) have been recognized as the most promising enabling technologies to meet challenges of modern electric power transmission systems, where reliability, economics, environmental and other social objectives must be balanced to optimize the grid assets and satisfy growing electrical demand. To this aim WAMPAC requires precise phasor and frequency information, which are acquired by deploying multiple time synchronized sensors, known as Phasor Measurement Units (PMUs), providing precise synchronized information about voltage and current phasors, frequency and rate-of-change-of-frequency.

One of the most challenges in the development of smart grids today is the presence of phasor measurement units with modern communication facilities. The presence of such technologies will enable advanced smart grid applications that were not possible before such as the real time tracking of system dynamics. In addition, one of its goal issues is to maintain a high level of system stability. However, with rapid expansion of power system to meet the needs of the increasing demands of customers, and under the pressure of economical aspects placed by utilities to push the systems to operate very close to their limits, system wide disturbance become more likely. Therefore, the need for a systematic study and design of a comprehensive system control strategy is gaining more and more attention. Wide area protection is a concept of using system- wide information and sending selected local information to remote locations in order to mitigate the propagation of major disturbances. This book proposed a WAMPAC system with a defensive approach to counteract the transient instabilities in power systems. The system objective is to maximize the system stability and avoid occurrence of blackouts.

The proceedings present a selection of refereed papers presented at the 1st International Conference on Electronic Engineering and Renewable Energy (ICEERE 2018) held during 15-17 April 2018, Saidi, Morocco. The contributions from electrical engineers and experts highlight key issues and developments essential to the multifaceted field of electrical engineering systems and seek to address multidisciplinary challenges in Information and Communication Technologies. The book has a special focus on energy challenges for developing the Euro-Mediterranean regions through new renewable energy technologies in the agricultural and rural areas. The book is intended for academia, including graduate students, experienced researchers and industrial practitioners working in the fields of Electronic Engineering and Renewable Energy.

Protection of Modern Power Systems Familiarize yourself with the cutting edge of power system protection technology All electrical systems are vulnerable to faults, whether produced by damaged equipment or the cumulative breakdown of insulation. Protection from these faults is therefore an essential part of electrical engineering, and the various forms of protection that have developed constitute a central component of any course of study related to power systems. Particularly in recent decades, however, the demands of decarbonization and reduced dependency on fossil fuels have driven innovation in the field of power systems. With new systems and paradigms come new kinds of faults and new protection needs, which promise to place power systems protection once again at the forefront of research and development. Protection of Modern Power Systems offers the first classroom-ready textbook to fully incorporate developments in renewable energy and ‘smart’ power systems into its overview of the field. It begins with a comprehensive guide to the principles of power system protection, before surveying the systems and equipment used in modern protection schemes, and finally discussing new and emerging protection paradigms. It promises to become the standard text in power system protection classrooms. Protection of Modern Power Systems readers will also find: Treatment of the new faults and protection paradigms produced by the introduction of new renewable generators Discussion of SmartGrids—intelligently-controlled active systems designed to integrate renewable energy into the power system—and their protection needs Detailed exploration of Synchronized Measurement Technology and Intelligent Electronic Devices Accompanying website to include Solutions Manual for instructors Protection of Modern Power Systems is an essential resource for students, researchers, and system engineers looking for a working knowledge of this critical subject.

The ubiquitous digital transformation also influences power system operation. Emerging real-time applications in information (IT) and operational technology (OT) provide new opportunities to address the increasingly demanding power system operation imposed by the progressing energy transition. This IT/OT convergence is epitomised by the novel Digital Twin (DT) concept. By integrating sensor data into analytical models and aligning the model states with the observed system, a power system DT can be created. As a result, a validated high-fidelity model is derived, which can be applied within the next generation of energy management systems (EMS) to support power system operation. By providing a consistent and maintainable data model, the modular DT-centric EMS proposed in this work addresses several key requirements of modern EMS architectures. It increases the situation awareness in the control room, enables the implementation of model maintenance routines, and facilitates automation approaches, while raising the confidence into operational decisions deduced from the validated model. This gain in trust contributes to the digital transformation and enables a higher degree of power system automation. By considering operational planning and power system operation processes, a direct link to practice is ensured. The feasibility of the concept is examined by numerical case studies.

Power System Protection in Future Smart Grids: Achieving Reliable Operation with Renewable Energy, Electric Vehicles and Distributed Generation demonstrates how to protect smart, highly renewable, and highly distributed power systems with state-of-the-art methods rooted in adaptive protection and dynamic response, and based on continuous communication. Focusing on the implementation of novel protection schemes, each chapter presents solutions accompanied by figurative elements and demonstrator codes in MATLAB, C, Python and Java. Chapters address active distribution networks, hybrid microgrids, EVs and inverters on fault levels, adaptive protection systems, dynamic protection strategies, and Hardware in the Loop (HiL) approaches. Demonstrates how to mitigate the numerous unanticipated protection consequences of smarter grids and smarter grid equipment Focuses on providing communication-based solutions and power hardware in the loop modeling for integration of novel devices Emphasizes the importance of automation, communication, and cybersecurity in future protection systems Fully supported with modern demonstrator coding in MATLAB, C, Python, and Java