Welded design is often considered as an area in which there's lots of practice but little theory. Welded design tends to be overlooked in engineering courses and many engineering students and engineers find materials and metallurgy complicated subjects. Engineering decisions at the design stage need to take account of the properties of a material – if these decisions are wrong failures and even catastrophes can result. Many engineering catastrophes have their origins in the use of irrelevant or invalid methods of analysis, incomplete information or the lack of understanding of material behaviour.The activity of engineering design calls on the knowledge of a variety of engineering disciplines. With his wide engineering background and accumulated knowledge, John Hicks is able to show how a skilled engineer may use materials in an effective and economic way and make decisions on the need for the positioning of joints, be they permanent or temporary, between similar and dissimilar materials.This book provides practising engineers, teachers and students with the necessary background to welding processes and methods of design employed in welded fabrication. It explains how design practices are derived from experimental and theoretical studies to produce practical and economic fabrication. - Provides specialist information on a topic often omitted from engineering courses - Explains why certain methods are used, and also gives examples of commonly performed calculations and derivation of data.

While there are several books on market that are designed to serve a company's daily shop-floor needs. Their focus is mainly on the physically making specific types of welds on specific types of materials with specific welding processes. There is nearly zero focus on the design, maintenance and troubleshooting of the welding systems and equipment. Applied Welding Engineering: Processes, Codes and Standards is designed to provide a practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product. Welding Engineers will also find this book a valuable source for developing new welding processes or procedures for new materials as well as a guide for working closely with design engineers to develop efficient welding designs and fabrication procedures. Applied Welding Engineering: Processes, Codes and Standards is based on a practical approach. The book's four part treatment starts with a clear and rigorous exposition of the science of metallurgy including but not limited to: Alloys, Physical Metallurgy, Structure of Materials, Non-Ferrous Materials, Mechanical Properties and Testing of Metals and Heal Treatment of Steels. This is followed by self-contained sections concerning applications regarding Section 2: Welding Metallurgy & Welding Processes, Section 3: Nondestructive Testing, and Section 4: Codes and Standards. The author's objective is to keep engineers moored in the theory taught in the university and colleges while exploring the real world of practical welding engineering. Other topics include: Mechanical Properties and Testing of Metals, Heat Treatment of Steels, Effect of Heat on Material During Welding, Stresses, Shrinkage and Distortion in Welding, Welding, Corrosion Resistant Alloys-Stainless Steel, Welding Defects and Inspection, Codes, Specifications and Standards. The book is designed to support welding and joining operations where engineers pass plans and projects to mid-management personnel who must carry out the planning, organization and delivery of manufacturing projects. In this book, the author places emphasis on developing the skills needed to lead projects and interface with engineering and development teams. In writing this book, the book leaned heavily on the author's own experience as well as the American Society of Mechanical Engineers (www.asme.org), American Welding Society (www.aws.org), American Society of Metals (www.asminternational.org), NACE International (www.nace.org), American Petroleum Institute (www.api.org), etc. Other sources includes The Welding Institute, UK (www.twi.co.uk), and Indian Air force training manuals, ASNT (www.asnt.org), the Canadian Standard Association (www.cas.com) and Canadian General Standard Board (CGSB) (www.tpsgc-pwgsc.gc.ca). - Rules for developing efficient welding designs and fabrication procedures - Expert advice for complying with international codes and standards from the American Welding Society, American Society of Mechanical Engineers, and The Welding Institute(UK) - Practical in-depth instruction for the selection of the materials incorporated in the joint, joint inspection, and the quality control for the final product.

Based on the European Welding Engineer (EWF) syllabus Part 3 - Construction and Design - this book provides a clear, highly illustrated and concise explanation of how welded joints and structures are designed and of the constraints which welding may impose on the design. Written for both students and practicing engineers in welding and design, the book will also be of value to civil, structural, mechanical and plant engineers.

Provides an introduction to all of the important topics in welding engineering. It covers a broad range of subjects and presents each topic in a relatively simple, easy to understand manner, with emphasis on the fundamental engineering principles. • Comprehensive coverage of all welding engineering topics • Presented in a simple, easy to understand format • Emphasises concepts and fundamental principles