The report of multi-disciplinary team of engineers and practitioners from a research project commissioned by the Association to create a resource to help water utilities operate and maintain water distributions systems to prevent water quality from deteriorating. They look at prevention programs, qu

Rev. ed. of: Modeling water quality in drinking water distribution systems / Robert M. Clark, Walter M. Grayman. 1998.

Protecting and maintaining water distributions systems is crucial to ensuring high quality drinking water. Distribution systems-consisting of pipes, pumps, valves, storage tanks, reservoirs, meters, fittings, and other hydraulic appurtenances-carry drinking water from a centralized treatment plant or well supplies to consumers' taps. Spanning almost 1 million miles in the United States, distribution systems represent the vast majority of physical infrastructure for water supplies, and thus constitute the primary management challenge from both an operational and public health standpoint. Recent data on waterborne disease outbreaks suggest that distribution systems remain a source of contamination that has yet to be fully addressed. This report evaluates approaches for risk characterization and recent data, and it identifies a variety of strategies that could be considered to reduce the risks posed by water-quality deteriorating events in distribution systems. Particular attention is given to backflow events via cross connections, the potential for contamination of the distribution system during construction and repair activities, maintenance of storage facilities, and the role of premise plumbing in public health risk. The report also identifies advances in detection, monitoring and modeling, analytical methods, and research and development opportunities that will enable the water supply industry to further reduce risks associated with drinking water distribution systems.

There are two groups of specialists involved in the development and application of water quality models, each of which have a different perspective on the use of models: Academics and scientists - chemistry specialists and microbiologists who develop the models. Practitioners - modelers and distribution engineers who use them to solve problems. There are limitations and constraints in the characterization of the underlying processes and the practical application of models to distribution networks, which require further research. The objectives of the research were to characterize the current state of predictive distribution system water quality models and to identify critical research needs for their improvement. The project reviewed both the development and application of models. The report is intended to both steer future research and to act as a general reference on water quality modeling. The report combines a literature review with the practical experience of the project team. The content of a draft report was discussed at an international workshop attended by academics, engineers, scientists, and hydraulic modelers with the objective of agreeing on specific research needs necessary to improve predictive modeling for water quality in distribution systems. The conclusions of the report are derived from the workshop and form the basis of 11 specific research briefs that have been submitted to AwwaRF for consideration of funding. Researchers often focus on modeling the individual processes that control water quality rather than fully modeling water quality throughout distribution systems. For these "process models" to be applied to real distribution networks, they need to be extended to take in account the physical characteristics of the system?the special and temporal variations in flow, velocity and water age, and the effects of mixing water that has traveled along different flow paths.

CD-ROM contains chapter 4 and appendices A & B.