The amount and variety of waste that humanity dumps in landfill sites is nothing short of a scandal, believes Rafat Siddique, of Deemed University in Patiala, India. Instead, we ought to be building new homes out of it! Siddique shows in this important book that many non-hazardous waste materials and by-products which are landfilled, can in fact be used in making concrete and similar construction materials.

Waste and Supplementary Cementitious Materials in Concrete: Characterisation, Properties and Applications provides a state-of-the-art review of the effective and efficient use of these materials in construction. Chapters focus on a specific type of material, addressing their characterization, strength, durability and structural applications. Sections include discussions of the properties of materials, including their physical, chemical and characterization, their strength and durability, modern engineering applications, case studies, the state of codes and standards of implementation, cost considerations, and the role of materials in green and sustainable construction. The book concludes with a discussion of research needs. - Focuses on material properties and applications (as well as 'sustainability' aspects) of cementitious materials - Assembles leading researchers from diverse areas of study - Ideas for use as a 'one stop' reference for advanced postgraduate courses focusing on sustainable construction materials

This volume presents the proceedings of the International Conference on The Science and Engineering of Recycling for Environmental Protection (WASCON 2000), of which a number of themes have been identified. All are inter-related and inter-dependent in so far as potential users of secondary, recovered or recycled material have to be assured that the material is environmentally safe and stable. It is the environmental challenge that forms a leading theme for the conference, and the themes of quality assurance and quality control support this aspect. In terms of use of 'recovered' materials, science and engineering play important and inter-dependent roles and this is reflected in themes which form the very core of the conference. Of no less importance is control of land contamination and how we propose to model for the long term impact of our aims. However dutiful and competent our ideas and studies, there has to be a measure of control and the role of legislation forms the final theme of WASCON 2000.The breadth of studies being undertaken world-wide and the innovative ideas that are expressed in papers submitted are worthy of this important subject. It is also interesting to note that papers were offered from 30 countries, a sign of the increasing awareness of the need to preserve our natural resources and utilize to the full those with which we are more familiar. This book will contribute to the understanding of and solution of environmental problems concerning the re-use of waste materials in construction.

”Reduce, Reuse, Recycle, and Recover“ is the sustainable guideline that has replaced the ”Take, Make, Waste“ attitude of the industrial age. Based on their background at the ETH Zurich and the Future Cities Laboratory in Singapore, the authors provide both a conceptual and practical look into materials and products which use waste as a renewable resource. This book introduces an inventory of current projects and building elements, ranging from marketed products, among them façade panels made of straw and self-healing concrete, to advanced research and development like newspaper, wood or jeans denim used as isolating fibres. Going beyond the mere recycling aspect of reused materials, it looks into innovative concepts of how materials usually regarded as waste can be processed into new construction elements. The products are organized along the manufacturing processes: densified, reconfigured, transformed, designed and cultivated materials. A product directory presents all materials and projects in this book according to their functional uses in construction: load-bearing, self-supporting, insulating, waterproofing and finishing products.

The concept of a circular economy in the construction sector captures global material flow through product design, inverse logistics, innovation and collaborations. The circulation of the economy takes into consideration global population influence, which affects the economy through a variety of construction product flows in particular. The increase in consumers means increasing product and services which participate in different waste streams. The emerging sustainable development in the construction industry requires the recycling of waste materials to reduce the negative environmental impact of construction activities. Accumulation and management of construction wastes is also becoming a major environmental and economical concern in many developing countries. Huge volumes of waste generated end up piled on landfill sites or illegally dumped, posing serious health and ecological problems. In the construction industry, recycling of waste concrete, masonry, cement, gypsum, to mention but a few, has become an important aspect due to the continued increase of construction wastes and depletion of natural aggregates. Why not establish a business system that is specifically designed to do much more value addition to the construction wastes and develop products which are not only in demand locally but internationally, to encourage exports for maximum financial gain. This book aims to analyze the current business model in the construction sector and the current legislation concerning waste management. It also highlights efforts required in order to refine the recycling methods in favor of a circular economy in the constuction industry. In support of a transition to a low carbon economy, different types of materials which can be produced from the construction wastes are indicated including processes which are used to obtain the final products. The market demand including penetration of the resulting products are given extensively. Policies and regulations to govern these undertakings are highlighted also. The municipalities will learn to redirect the local construction industries on how to avoid dumping at landfill sites as the space has currently become an issue. Researchers globally will learn how to go up through the Technology Readiness Levels (TRL) from basic research through prototype development and finally up to commercialization in projects related to the construction.

Waste and By-Products in Cement-Based Materials: Innovative Sustainable Materials for a Circular Economy covers various recycled materials, by-products and wastes that are suitable for the manufacture of materials within the spectrum of so-called cement-based materials (CBM). Sections cover wastes for replacement of aggregates in CBM, focus on the application of wastes for the replacement of clinker and mineral additions in the manufacture of binders, discuss the optimization process surrounding the manufacture of recycled concrete and mortars, multi-recycling, advanced radiological studies, optimization of self-compacting concrete, rheology properties, corrosion prevention, and more. Final sections includes a review of real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others, as well as a proposal of new regulations to promote the use of waste in the manufacture of CBM. - Favors the institution of the circular economy in the construction industry by eliminating the barriers that currently prevent industrial waste from being valorized by its inclusion in CBM design - Features an in-depth exploration of the strengths and weaknesses of new raw materials and their application to CBMs - Features real-scale applications that have been made in recent years of cement-based materials in roads, railway superstructures, buildings and civil works, among others - Presents current, state-of-the-art, and future-prospects for the use of industrial waste in CBMs

Advances in Construction and Demolition Waste Recycling: Management, Processing and Environmental Assessment is divided over three parts. Part One focuses on the management of construction and demolition waste, including estimation of quantities and the use of BIM and GIS tools. Part Two reviews the processing of recycled aggregates, along with the performance of concrete mixtures using different types of recycled aggregates. Part Three looks at the environmental assessment of non-hazardous waste. This book will be a standard reference for civil engineers, structural engineers, architects and academic researchers working in the field of construction and demolition waste. - Summarizes key recent research in recycling and reusing concrete and demolition waste to reduce environmental impacts - Considers techniques for managing construction and demolition waste, including waste management plans, ways of estimating levels of waste, and the types and optimal location of waste recycling plants - Reviews key steps in handling construction and demolition waste