This complete laboratory reference manual explains the principles behind solid phase extraction (SPE) and provides readily reproducible protocols for solving extraction problems in forensic and clinical chemistry. Numerous actual chromatograms, based on original research and diverse applications, demonstrate the technique and the results that can be achieved. Extensive appendices allow fast access to frequently needed information on reagents, the preparation of solutions and buffers, milliequivalent and millimode calculations, buffers and pKa for SPE, and a complete RapidTrace® technical manual. Each proven protocol is described in step-by-step detail and contains an introduction outlining the principle behind the technique, lists of equipment and reagents, and tips on troubleshooting and on avoiding known pitfalls.

Headspace analysis by extraction/GC-MS is a common method of detecting volatile hydrocarbon accelerants in fire debris samples. Solid-phase microextraction was tested to determine if there is selective extraction of chemically distinct compounds. It was found that both the polydimethylsiloxane (PDMS) and Carboxen/PDMS solid phase microextraction fibers show preferential extraction of aliphatic or aromatic compounds from the headspace depending on fiber type and temperature. The Carboxen/PDMS fiber type showed particular (although not exclusive) selectivity for extraction of aromatic hydrocarbons. Other experimental considerations of SPME are noted.

Gas chromatography - mass spectrometry (GC-MS) is an established instrumental technique used for the analysis of fire debris for accelerant detection. However, matrix problems, such as pyrolysis product interference, are still encountered. These interferences often lead to inconclusive interpretation of the chromatographic results. This study describes methods for analysing arson accelerants using gas chromatography coupled with ion trap mass spectrometry. The latter technique lends itself to both conventional (GC-MS) as well as tandem mass spectrometry (GC-MS-MS). Since petrol (gasoline) is one of the more common distillate blends used by arsonists, especially in South Africa, the identification of petrol in fire debris samples was investigated. In order to overcome pyrolysis product interference and improve detection selectivity of the aromatic hydrocarbons in petrol residues, tandem mass spectrometry was used in combination with capillary gas chromatography. The added parameter of the third dimension of selectivity proved to be superior to conventional GC-MS in obtaining characteristic aromatic hydrocarbon profiles for petrol without interference from pyrolysis artefacts.

The study of fire debris analysis is vital to the function of all fire investigations, and, as such, Fire Debris Analysis is an essential resource for fire investigators. The present methods of analysis include the use of gas chromatography and gas chromatography-mass spectrometry, techniques which are well established and used by crime laboratories throughout the world. However, despite their universality, this is the first comprehensive resource that addresses their application to fire debris analysis.Fire Debris Analysis covers topics such as the physics and chemistry of fire and liquid fuels, the interpretation of data obtained from fire debris, and the future of the subject. Its cutting-edge material and experienced author team distinguishes this book as a quality reference that should be on the shelves of all crime laboratories. - Serves as a comprehensive guide to the science of fire debris analysis - Presents both basic and advanced concepts in an easily readable, logical sequence - Includes a full-color insert with figures that illustrate key concepts discussed in the text

Designed to assist with specific extraction requirements. Contains over a thousand references to the use of Solid Phase Extraction in sample preparation, including method sheets, peer-reviewed articles, and surveys. Includes: analyte by compound, analyte by class, and reference table.