The last two decades have seen a steady and impressive development, and eventual industrial acceptance, of the high energy-rate manufact turing techniques based on the utilisation of energy available in an explo sive charge. Not only has it become economically viable to fabricate complex shapes and integrally bonded composites-which otherwise might not have been obtainable easily, if at all-but also a source of reasonably cheap energy and uniquely simple techniques, that often dispense with heavy equipment, have been made available to the engineer and applied scientist. The consolidation of theoretical knowledge and practical experience which we have witnessed in this area of activity in the last few years, combined with the growing industrial interest in the explosive forming, welding and compacting processes, makes it possible and also opportune to present, at this stage, an in-depth review of the state of the art. This book is a compendium of monographic contributions, each one of which represents a particular theoretical or industrial facet of the explosive operations. The contributions come from a number of practising engineers and scientists who seek to establish the present state of knowledge in the areas of the formation and propagation of shock and stress waves in metals, their metallurgical effects, and the methods of experimental assessment of these phenomena.

Exploring advances and strengthening communications among researchers in manufacturing and construction technologies, this book covers nondestructive testing and evaluation methods. Drawing on a wide range of experts, it provides insights from every sector of the field. Based on a three-day conference titled "Nondestructive Testing and Evaluation for Manufacturing and Construction" held on the campus of the University of Illinois at Urbana-Champaign, the papers presented in the book foster development of new and innovative methods.

This book, titled “Material Flow Analysis,” emphasizes the overview of various solid-state joining processes and grain refinement processes where plastic deformation is predominant. In addition, composite processes aimed at strengthening the metal and polymeric materials for various environmental conditions have been incorporated, while advances in the extraction process for purification of tri-n-butyl phosphate (TBP)/inositol hexaphosphate (IP6) have been discussed in detail.

Mechanical Engineer's Reference Book: 11th Edition presents a comprehensive examination of the use of Systéme International d' Unités (SI) metrication. It discusses the effectiveness of such a system when used in the field of engineering. It addresses the basic concepts involved in thermodynamics and heat transfer. Some of the topics covered in the book are the metallurgy of iron and steel; screw threads and fasteners; hole basis and shaft basis fits; an introduction to geometrical tolerancing; mechanical working of steel; high strength alloy steels; advantages of making components as castings; and basic theories of material properties. The definitions and classifications of refractories are fully covered. An in-depth account of the mechanical properties of non-ferrous materials is provided. Different fabrication techniques are completely presented. A chapter is devoted to description of tubes for water, gas, sanitation, and heating services. Another section focuses on the accountant's measure of productivity. The book can provide useful information to engineers, metallurgists, students, and researchers.