A practical introduction on today's challenge of controlling and managing the water resources used by and affected by cities and urbanized communities. The book offers an integrated engineering approach, covering the spectrum of urban watershed management, urban hydraulic systems, and overall stormwater management. Each chapter concludes with helpful problems. Solutions Manual available to qualified professors and instructors upon request. Introduces the reader to two popular, non-proprietary computer-modeling pro-grams: HEC-HMS (U.S. Army Corps of Engineers) and SWMM (U.S EPA).

Latest developments of urban hydrology and hydraulic design procedures for storm water management.Drainage planning is an approach that integrates both local and regional efforts to identify drainage conveyance and storage facilities based on hydrologic optimization and cost minimization individually and collectively. In general, the first six chapters cover the hydrologic procedures for rainfall and runoff predictions, and the next 12 chapters focus on hydraulic designs of urban channel, culvert, street inlet, sewer drain, detention basin, retention basin, infiltration basin, low impact designs, and storm water modeling techniques by various routing methods.Hydrology analyses are lengthy in calculation and repetitive in procedure. As a result, Excel Spreadsheet is the most useful and handy tool for hydraulic and hydrologic designs. This book includes 18 sets of spreadsheets developed for 18 subjects. With these spreadsheets, it is easy for the reader to conduct sensitivity tests. Many of the design methods documented in this book have been adopted as the recommended design procedure by Denver, Las Vegas, and Sacramento metropolitan areas in the United States. Based on these methods, there are many design computer models that have been developed and supported by the Denver metro governments for stormwater design purposes.

Prepared byØtheØTask Committee of the Urban Water Resources Research Council of ASCE. Copublished by ASCE and the Water Environment Federation. Design and Construction of Urban Stormwater Management Systems presents a comprehensive examination of the issues involved in engineering urban stormwater systems. This Manual?which updates relevant portions of Design and Construction of Sanitary and Storm Sewers, MOP 37?reflects the many changes taking place in the field, such as the use of microcomputers and the need to control the quality of runoff as well as the quantity. Chapters are prepared by authors with experience and expertise in the particular subject area. The Manual aids the practicing engineer by presenting a brief summary of currently accepted procedures relating to the following areas: financial services; regulations;Ø surveys and investigations;Ø design concepts and master planning;Ø hydrology and water quality;Ø storm drainage hydraulics; andØ computer modeling.

The rapid conversion of land to urban and suburban areas has profoundly altered how water flows during and following storm events, putting higher volumes of water and more pollutants into the nation's rivers, lakes, and estuaries. These changes have degraded water quality and habitat in virtually every urban stream system. The Clean Water Act regulatory framework for addressing sewage and industrial wastes is not well suited to the more difficult problem of stormwater discharges. This book calls for an entirely new permitting structure that would put authority and accountability for stormwater discharges at the municipal level. A number of additional actions, such as conserving natural areas, reducing hard surface cover (e.g., roads and parking lots), and retrofitting urban areas with features that hold and treat stormwater, are recommended.

Comprehensive guide and reference to city stormwater runoff and streamflow management.

Effective urban drainage to manage stormwater and control flooding depends on good engineering, especially when an environmentally sustainable approach is being applied. This new text focuses on green methods and modelling techniques. It covers the principles of hydrology and drainage, low-impact-development (LID) designs, computer modelling techniques, the evaluation of existing systems, and planning for both new development and urban renewal. It outlines design procedures using examples, spreadsheet models, photos, and real-world design examples. Unlike other books, which focus on extreme events, this book covers hydrologic designs for both extreme and frequent events, and reflects the latest revolution in stormwater LID management, and takes a quantitative as well as a qualitative approach. PowerPoint® presentations and Excel® computer models are provided to follow and build on the exercises in the book. It is written especially for students on urban watershed courses, and also for those studying urban planning, landscaping, water resources, hydrology and hydraulics.