FROM THE PREFACE In this time of dwindling budgets, increasing service needs, and increasing regulatory requirements, wastewater treatment professionals are continually called upon to upgrade their wastewater treatment plants. To do so efficiently and effectively, one must develop a clear approach to use in upgrading a plant and have the proper tools available to implement that approach. This book is meant to assist readers in developing and implementing their upgrading projects. First, Chapter 1 details the upgrading approach. The tools to be used are presented in Chapters 2 through 6. Finally, in Chapter 7, six case histories are presented to illustrate the plant upgrading techniques presented in the previous chapters. Through this book, the authors hope to assist readers in meeting their upgrade requirements, while making the most efficient use of the resources at hand.

Step-by-step procedures for planning, design, construction and operation: * Health and environment * Process improvements * Stormwater and combined sewer control and treatment * Effluent disposal and reuse * Biosolids disposal and reuse * On-site treatment and disposal of small flows * Wastewater treatment plants should be designed so that the effluent standards and reuse objectives, and biosolids regulations can be met with reasonable ease and cost. The design should incorporate flexibility for dealing with seasonal changes, as well as long-term changes in wastewater quality and future regulations. Good planning and design, therefore, must be based on five major steps: characterization of the raw wastewater quality and effluent, pre-design studies to develop alternative processes and selection of final process train, detailed design of the selected alternative, contraction, and operation and maintenance of the completed facility. Engineers, scientists, and financial analysts must utilize principles from a wide range of disciplines: engineering, chemistry, microbiology, geology, architecture, and economics to carry out the responsibilities of designing a wastewater treatment plant. The objective of this book is to present the technical and nontechnical issues that are most commonly addressed in the planning and design reports for wastewater treatment facilities prepared by practicing engineers. Topics discussed include facility planning, process description, process selection logic, mass balance calculations, design calculations, and concepts for equipment sizing. Theory, design, operation and maintenance, trouble shooting, equipment selection and specifications are integrated for each treatment process. Thus delineation of such information for use by students and practicing engineers is the main purpose of this book.

Hailed on its initial publication as a real-world, practical handbook, the second edition of Handbook of Water and Wastewater Treatment Plant Operations continues to make the same basic point: water and wastewater operators must have a basic skill set that is both wide and deep. They must be generalists, well-rounded in the sciences, cyber operations, math operations, mechanics, technical concepts, and common sense. With coverage that spans the breadth and depth of the field, the handbook explores the latest principles and technologies and provides information necessary to prepare for licensure exams. Expanded from beginning to end, this second edition provides a no-holds-barred look at current management issues and includes the latest security information for protecting public assets. It presents in-depth coverage of management aspects and security needs and a new chapter covering the basics of blueprint reading. The chapter on water and wastewater mathematics has tripled in size and now contains an additional 200 problems and 350 math system operational problems with solutions. The manual examines numerous real-world operating scenarios, such as the intake of raw sewage and the treatment of water via residual management, and each scenario includes a comprehensive problem-solving practice set. The text follows a non-traditional paradigm based on real-world experience and proven parameters. Clearly written and user friendly, this revision of a bestseller builds on the remarkable success of the first edition. This book is a thorough compilation of water science, treatment information, process control procedures, problem-solving techniques, safety and health information, and administrative and technological trends.

This book offers the most in-depth, step-by-step coverage available of contemporary water treatment plant planning, design and operations. Readers can walk step by step through water treatment plant planning and design, including predesign reports, problem definition, site selection and more.

Upgrading and Retrofitting Water and Wastewater Treatment Plants” is a new MOP from WEF. Upgrading and retrofitting represents the single largest investment that a public or private utility will make. The tricky aspect of upgrading and retrofitting a treatment plant is that during the upgrade process the rest of the plant must operate with no process upsets and meet permitting guidelines. Written by a set of industry experts who have significant years of experience in this area. It is a practical MOP geared to avoid pitfalls, cost overruns, and permit violations.

Practical techniques for handling industrial waste and designing treatment facilities Practical Wastewater Treatment is designed as a teaching and training tool for chemical, civil, and environmental engineers. Based on an AIChE training course, developed and taught by the author, this manual equips readers with the skills and knowledge needed to design a wastewater treatment plant and handle various types of industrial wastes. With its emphasis on design issues and practical considerations, the manual enables readers to master treatment techniques for managing a wide range of industrial wastes, including oil, blood and protein, milk, plating, refinery, and phenolic and chemical plant wastes. A key topic presented in the manual is biological modeling for designing wastewater treatment plants. The author demonstrates how these models lead to both more efficient and more economical plants. As a practical training tool, this manual contains a number of features to assist readers in tackling complex, real-world problems, including: * Examples and worked problems throughout the manual demonstrate how various treatment plants and treatment techniques work * Figures and diagrams help readers visualize and understand complex design issues * References as well as links to online resources serve as a gateway to additional information * Practical design hints, stemming from the author's extensive experience, help readers save time and avoid unwanted and expensive pitfalls * Clear and logically organized presentation has been developed and refined based on an AIChE course taught by the author in the United States, Mexico, and Venezuela Whether a novice or experienced practitioner, any engineer who deals with the treatment of industrial waste will find a myriad of practical advice and useful techniques that they can immediately apply to solve problems in wastewater treatment.