Short-range structural ordering is critical to functional properties such as ion migration and ferroelectricity. The discovery and development of high-performance functional materials rely on advanced characterization tools and theoretical models. This dissertation focuses on solid-state nuclear magnetic resonance spectroscopy (NMR) and imaging (MRI) studies of fast-ion conductors as solid electrolytes (SEs) and ferroelectric materials to understand the structure-property correlation, aided by computational investigations.All-solid-state batteries (ASSBs) which employ SEs, have gained much attention due to their improved safety and energy density compared with the current commercial liquid-electrolyte-based lithium-ion batteries. However, challenges such as limited power density, narrow electrochemical stability window, poor interfacial contact, and dendrite growth associated with current SEs urge an in-depth fundamental understanding of their working mechanism and strategies to address these challenges. The mechanism of dendrite formation and propagation in solid electrolytes is different from that in liquid systems, and the challenges in non-invasively tracking the process in real-time leave the exact mechanism elusive. In Chapters 2 and 3, dendrite growth in solids at both the interface and bulk of different depths in Li/ Li7La3Zr2O12 (LLZO) /Li solid cells is probed using three-dimensional in situ and ex situ MRI non-invasively. We show that the accumulation of Li microstructure kicks off from the surface of Li metal electrodes before hard shorting the Li/LLZO/Li cell. More importantly, we identified Li dendrite originated from both the interface and the bulk LLZO electrolyte, which is supported by quantitative experimental evidence from tracer-exchange NMR. Halide-based SEs recently gained much attention due to their improved ionic conductivity compared with oxide-based electrolytes and good chemical/electrochemical stability. Chapter 4 introduces a series of Br-doped Li3YCl6. XRD has shown increased lattice parameters, with broadened channels for Li+-ion conduction. 7Li, 35Cl, 79Br NMR are employed to study the local structure, and the results reveal distortion in the symmetry due to defect formation. Li3YCl4Br2 has short T1 relaxation time, which is an indicator of high Li+ ion mobility. NMR and AIMD calculations show that introducing Br into the Li3YCl6 structure changes it from a one-dimensional to a three-dimensional conductor. By revealing Li dendrite formation mechanisms and understanding the origins of fast Li+-ion conduction in SEs with combined experimental and computational studies, we hope to achieve rational designs of SEs for the next-generation batteries. The centrosymmetric polymorph of KNaNbOF5 undergoes a reconstructive transition from a rare A-site vacancy ordered perovskite to a unique non-perovskite high-temperature phase. Previously, the high-temperature phase was proposed to exhibit dynamical disorder with mixed occupancy of O and F on the anion sites owing to hopping rotations of the [NbOF5]2− octahedra. In Chapter 5, 19F NMR techniques demonstrate the dynamic anion configurations through this reconstructive transition. Based on NMR experiments and first-principle calculations, we conclude that the high-temperature phase exhibits Cmcm symmetry with hopping rotations of the [NbOF5]2− octahedra occurring only about the Fapical−Nb−O axis of the octahedra such that there are no O/F mixed occupancy anion sites. We use these results to refine the microscopic description of the reconstructive transition and its driving force. This work demonstrates the efficacy of 19F NMR techniques combined with electronic structure calculations to understand thermodynamically driven changes in heteroanionic materials. Solid-state NMR spectroscopy, microscopy, and relaxometry combined with computational investigations prove to be powerful to unveil structural modulation-property correlations providing insights and guidelines for new material discoveries.

The rediscovery of fast ion conduction in solids in the 1960's stimulated interest both in the scientific community in which the fundamentals of diffusion, order-disorder phenomena and crystal structure evaluation required re-examination, and in the technical community in which novel approaches to energy conversion and chemical sensing became possible with the introduction of the new field of "Solid State Ionics. " Because of both the novelty and the vitality of this field, it has grown rapidly in many directions. This growth has included the discovery of many new crystalline fast ion conductors, and the extension to the fields of organic and amorphous compounds. The growth has involved the extension of classical diffusion theory in an attempt to account for carrier interactions and the development of sophisticated computer models. Diffraction techniques have been refined to detect carrier distributions and anharmonic vibrations. Similar advances in the application of other techniques such as NMR, Raman, IR, and Impedance Spectroscopies to this field have also occurred. The applications of fast ion conducting solid electrolytes have also developed in many directions. High energy density Na/S batteries are now reaching the last stages of development, Li batteries are being implanted in humans for heart pacemakers, and solid state fuel cells are again being considered for future power plants. The proliferation of inexpensive microcomputers has stimulated the need for improved chemical sensors--a major application now being the zirconia auto exhaust sensor being sold by the millions each year.

Semiannual, with semiannual and annual indexes. References to all scientific and technical literature coming from DOE, its laboratories, energy centers, and contractors. Includes all works deriving from DOE, other related government-sponsored information, and foreign nonnuclear information. Arranged under 39 categories, e.g., Biomedical sciences, basic studies; Biomedical sciences, applied studies; Health and safety; and Fusion energy. Entry gives bibliographical information and abstract. Corporate, author, subject, report number indexes.

Uniquely describes both the crystallography and properties of perovskite related materials. Practical applications in solar cells, microelectronics and telecommunications Interdisciplinary topic drawing on materials science, chemistry, physics, and geology Contains problems and answers to enhance knowledge retention

Crystals are sometimes called 'Flowers of the Mineral Kingdom'. In addition to their great beauty, crystals and other textured materials are enormously useful in electronics, optics, acoustics and many other engineering applications. This richly illustrated text describes the underlying principles of crystal physics and chemistry, covering a wide range of topics and illustrating numerous applications in many fields of engineering using the most important materials today. Tensors, matrices, symmetry and structure-property relationships form the main subjects of the book. While tensors and matrices provide the mathematical framework for understanding anisotropy, on which the physical and chemical properties of crystals and textured materials often depend, atomistic arguments are also needed to quantify the property coefficients in various directions. The atomistic arguments are partly based on symmetry and partly on the basic physics and chemistry of materials. After introducing the point groups appropriate for single crystals, textured materials and ordered magnetic structures, the directional properties of many different materials are described: linear and nonlinear elasticity, piezoelectricity and electrostriction, magnetic phenomena, diffusion and other transport properties, and both primary and secondary ferroic behavior. With crystal optics (its roots in classical mineralogy) having become an important component of the information age, nonlinear optics is described along with the piexo-optics, magneto-optics, and analogous linear and nonlinear acoustic wave phenomena. Enantiomorphism, optical activity, and chemical anisotropy are discussed in the final chapters of the book.