As a large variety of transducers are required for the current needs of NDT applications, this book gives a consolidated account regarding the basic principles, applications, advantages and limitations, design considerations, materials and methods used for their evaluation and calibration etc. by the technocrats and professionals involved in ultrasonic NDT.

"An ultrasonic microscope was designed and constructed to detect surface flaw defects on materials which contain natural discontinuities. The application of this flaw detection system to via-fill defects of single layer multiple layer ceramic substrates was considered. The microscope was evaluated for its depth sensitivity and resolution capabilities. The results of the experiment are that the ultrasonic system has repeatable depth sensitivities of better than ten microns, and resolution capabilities on the order of 3.3 cycles per millimeter. The application of the flaw detector to ceramic substrate via-fill defect inspection was verified."--Abstract.

Ultrasonic testing (UT) has been an accepted practice of inspection in industrial environments for decades. This book, Industrial Ultrasonic Inspection, is designed to meet and exceed ISO 9712 training requirements for Level 1 and Level 2 certification. The material presented in this book will provide readers with all the basic knowledge of the theory behind elastic wave propagation and its uses with the use of easy to read text and clear pictorial descriptions. Discussed UT concepts include: - General engineering, materials, and components theory - Theory of sound waves and their propagation - The general uses of ultrasonic waves - Comprehensive lab section - Methods of ultrasonic wave generation - Different ultrasonic inspection techniques - Ultrasonic flaw detectors, scanning systems, and probes - Calibration fundamentals - General scanning techniques - Flaw sizing techniques - Basic analysis for ultrasonic, phased array ultrasonic, and time of flight diffraction inspection techniques - Codes and standards - Principles of technical documentation and reporting It is my intention that this book is used for general training purposes. It is the ideal classroom textbook. -Ryan Chaplin

Ultrasonic testing is a relatively new branch of science and industry. The development of ultrasonic testing started in the late 1920s. At the beginning, the fundamentals of this method were borrowed from basic physics, geometrical and wave optics, acoustics and seismology. Later it became clear that some of these theories and calculation methods could not always explain the phenomena observed in many specific cases of ultrasonic testing. Without knowing the nuances of the ultrasonic wave propagation in the test object it is impossible to design effective inspection technique and search units for it realization. This book clarifies the theoretical differences of ultrasonics from the other wave propagation theories presenting both basics of physics in the wave propagation, elementary mathematic and advanced practical applications. Almost every specific technique presented in this book is proofed by actual experimental data and examples of calculations.