An investigation has been made of the effects of conical wing camber and body indentation according to the supersonic area rule on the aerodynamic wing loading characteristics of a wing-body-tail configuration at transonic speeds. The wing aspect ratio was 3, taper ratio was 0.1, and quarter-chord-line sweepback was 52.5° with 3-percent-thick airfoil sections. The tests were conducted in the Langley 16-foot transonic tunnel at Mach numbers from 0.80 to 1.05 and at angles of attack from 0° to 14°, with Reynolds numbers based on mean aerodynamic chord varying from 7 x 106 to 8 x 106. Conical camber delayed wing-tip stall and reduced the severity of the accompanying longitudinal instability but did not appreciably affect the spanwise load distribution at angles of attack below tip stall. Body indentation reduced to transonic chordwise center-of-pressure travel from about 8 percent to 5 percent of the mean aerodynamic chord.

The Encyclopedia of Aerodynamics was written for pilots at all levels from private pilot to airline pilot, military pilots and students of aerodynamics as a complete reference manual to aerodynamic terminology. General aerodynamic text books for pilots are relatively limited in their scope while aerodynamic text books for engineering students involve complex calculus. The references in this book, The Encyclopedia of Aerodynamics, are clearly described and only basic algebra is used in a few references but is completely devoid of any calculus - an advantage to many readers. Over 1400 references are included with alternative terms used where appropriate and cross-referenced throughout. The text is illustrated with 178 photographs and 96 diagrams. The Encyclopedia of Aerodynamics is an ideal aerodynamic reference manual for any pilot's bookshelf.

Learn the latest technologies needed to pass the FAA airframe and powerplant maintenance certification! Aircraft Basic Science, Eighth Edition, is a valuable resource for students of aviation technology that provides updated information needed to prepare for an FAA airframe and powerplant maintenance certification. This expanded edition includes recent advances in technology, such as the use of composite aircraft materials, with revised examples and figures to more accurately reflect the state of the industry. For easy reference, chapters are illustrated and present specific aspects of aircraft materials, fabrication processes, maintenance tools, and federal aviation regulations. This updated edition includes: The use, inspection, and fabrication of composite structures, including honeycomb, fiberglass, and carbon fiber materials 4-page full-color insert Hypersonic flight aerodynamics as they apply to high-speed aircraft and space reentry vehicles Tilt rotor aircraft aerodynamics and design New alloys and processes used in aircraft such as powered aluminum and friction stir welding Relevant ICAO/EASA (European and international) rules and regulations including maintenance and repair organizations (MROs), the NASA safety reporting system, ATA systems, the electronic document retrieval system, and recordkeeping systems Ground handling and safety for large, airline-style aircraft New alternative fuels under development including bio and other synthetic fuels FAA Airframe and Powerplant certification requirements needed to perform and approve aircraft maintenance

A one-stop Desk Reference, for engineers involved in all aspects of aerospace; this is a book that will not gather dust on the shelf. It brings together the essential professional reference content from leading international contributors in the field. Material covers a broad topic range from Structural Components of Aircraft, Design and Airworthiness to Aerodynamics and Modelling * A fully searchable Mega Reference Ebook, providing all the essential material needed by Aerospace Engineers on a day-to-day basis. * Fundamentals, key techniques, engineering best practice and rules-of-thumb together in one quick-reference.* Over 2,500 pages of reference material, including over 1,500 pages not included in the print edition

Newly revised and comprehensive information on aircraft gas turbine powerplants and updated coverage of jet engine technology. Extensive cross-reference between today's aircraft and engines. Now includes over 500 illustrations, charts and tables. Written by Otis and Vosbury. ISBN# 0-88487-311-0. 514 pages.