Experimental research has been conducted on the effects of wall cooling, Mach number, and unit Reynolds number on the transition Reynolds number of cylindrical separated boudary layers on an ogive-cylinder model. Results were obtained from pressure and temperature measurements and shadowgraph observations. The maximum scope of measurements encompassed Mach numbers between 2.06 and 4.24, Reynolds numbers (based on length of separation) between 60,000 and 400,000, and ratios of wall temperatures to adiabatic wall temperature between 0.35 and 1.0.

Interdisciplinary and Advanced Topics in Science and Engineering, Volume 3: Separation of Flow presents the problem of the separation of fluid flow. This book provides information covering the fields of basic physical processes, analyses, and experiments concerning flow separation. Organized into 12 chapters, this volume begins with an overview of the flow separation on the body surface as discusses in various classical examples. This text then examines the analytical and experimental results of the laminar boundary layer of steady, two-dimensional flows in the subsonic speed range. Other chapters consider the study of flow separation on the two-dimensional body, flow separation on three-dimensional body shape and particularly on bodies of revolution. This book discusses as well the analytical solutions of the unsteady flow separation. The final chapter deals with the purpose of separation flow control to raise efficiency or to enhance the performance of vehicles and fluid machineries involving various engineering applications. This book is a valuable resource for engineers.

A good understanding of turbulent compressible flows is essential to the design and operation of high-speed vehicles. Such flows occur, for example, in the external flow over the surfaces of supersonic aircraft, and in the internal flow through the engines. Our ability to predict the aerodynamic lift, drag, propulsion and maneuverability of high-speed vehicles is crucially dependent on our knowledge of turbulent shear layers, and our understanding of their behavior in the presence of shock waves and regions of changing pressure. Turbulent Shear Layers in Supersonic Flow provides a comprehensive introduction to the field, and helps provide a basis for future work in this area. Wherever possible we use the available experimental work, and the results from numerical simulations to illustrate and develop a physical understanding of turbulent compressible flows.

Basic research programs are reported with fundamental applications to supersonic flight. The experimental studies made use of the unique capabilities of the high Reynolds number Mach 3 facility. The experimental programs concentrated on phenomena associated with incipient separation and separation of turbulent boundary layers over a large Reynolds number range. The reattachment phenomena of a shear layer was also studied in great depth.

The method of integral relations was successfully applied to compressible nonadiabatic turbulent boundary layers on a flat plate. The theory is designed to accept any desired eddy-viscosity model. A particular eddy-viscosity model was incorporated into the method, and the equations were programmed for application to a flat plate with no pressure gradient. The variations of the skin-friction coefficient with Reynolds number, Mach number, and temperature ratio were calculated using this program, and the results are in good accord with similar results calculated by the Spalding-Chi method and the Rubesin T' method. An analysis was made to predict to what extent turbulent separation of the free-interaction type can be inhibited by means of surface cooling. It was observed experimentally that free-interaction is applicable to separated turbulent boundary layers up to the separation point or beyond. The free-interaction model used in the analysis is based on adding the boundary-layer displacement thickness to the actual body dimensions in calculating the induced pressures. The critical temperature ratios calculated on this basis are generally greater than adiabatic wall temperature except in the supersonic range up to a Mach number approaching 3, where moderate cooling is required to inhibit separation.

The investigation is a first step to the study of the effect of cross flow in laminar separation at supersonic speeds. It is related to the selection of a final axi-symmetric model. Several problems were examined. First, the effect of streamwise vortices that develop systematically in laminar reattaching flows, triggered by small irregularities in the leading edge thickness. Second, the choice of the diameter of the model such that the flow resembles that of an equivalent planar body, third the programming of Lees-Reeves theory on a 1130 IBM computer to perform a parametric study and finally the development of a new accurate technique or criteria to ascertain that fully laminar shock wave boundary layer interactions can be obtained. (Author).