Training Circular TC 21-305-11 Training Program for the Family of Medium Tactical Vehicles Operator May 1999This TC provides a training program for the Family of Medium Tactical Vehicles (FMTV cargo variants) vehicle operator according to AR 600-55. It was designed for the Medium Tactical Vehicle 5-ton cargo truck, but also may be used for the Light Medium Tactical Vehicles 2 1/2-ton cargo variant. It provides standardized training and testing in the operation, maintenance, and safety of this vehicle. It stresses hands-on training with minimal classroom instruction and does not include any theater-unique requirements. Additionally, during the development of this TC, it was assumed that each driver candidate would have a state driver's license, have completed accident avoidance training according to TC 21-305, and possess an OF 346 Learners Permit.The lesson content for this training program is arranged sequentially and separated into three chapters (Chapters 4, 5, and 7). Chapter 4 contains training for driving operations and Chapter 5 for trailer operations. Testing is contained in Chapter 7. For those operators trained on truck operations, testing is conducted after the training in Chapter 4. Operators that are trained in trailer operations are tested after receiving all training in Chapters 4 and 5. This allows the commander the flexibility to tailor 5-ton operator training based on the unit's equipment. Additionally, all training should be annotated on DA Form 348, Equipment Operator's Qualification Record (or ULLS generated DA Form 348-E) according to AR 600-55.

This manual, Training Circular TC 21-306 Tracked Combat Vehicle Driver Training June 2019, provides unit commanders and unit master drivers with guidance on developing tracked, combat vehicle driver training programs for their organizations. This TC provides guidance on how to integrate drivers training programs into unit gunnery training and other routine duties and tasks of units equipped with tracked combat vehicles. This manual provides units with resources and guidance to support training that promotes safe driving practices, accident avoidance, and technical competence to produce more lethal and effective combat vehicle crews. Hands-on training in a controlled environment and under the close supervision of qualified and licensed trainers is stressed throughout this TC.TC 21-306 applies to the Active Army, Army National Guard/Army National Guard of the United States and United States Army Reserve unless otherwise stated.Leaders must emphasize driver training within their organizations because of the length, width, and high ground pressure of tracked combat vehicles, the terrain tracked combat vehicles are required to operate in, and the numerous blind spots associated with tracked combat vehicles. These variables demand additional skills and knowledge beyond those required for tactical wheeled vehicles. Unit drivers training programs must challenge drivers to use safe driving practices, increase their awareness to improve accident avoidance, and improve crew performance. Programs must train drivers to understand the operational limitations of the vehicles they are operating so they can negotiate complex terrain under difficult and stressful conditions.This TC covers critical information ranging from vehicle operations to considerations for reducing the risk of environmental damage during training.This TC consists of three chapters. The chapters contain the following information: Chapter 1 describes a system for identifying, selecting, and qualifying tracked vehicle driver instructors, vehicle drivers, and planning considerations for unit programs and training events.Chapter 2 discusses vehicle or equipment introductory training, operator technical manual familiarization, vehicle preventive maintenance checks and services procedures, instrumentation familiarization, placing vehicles into operation, self-recovery procedures, and guidance on meshing unit gunnery, and drivers training requirements.Chapter 3 highlights the dangers and safety risks associated with operating tracked combat vehicles as well the environmental hazards that tracked combat vehicles pose. The chapter provides guidance on how to mitigate these risks to personnel and the operating environment.

This TC applies to the Active Army, the Army National Guard, the United States Army Reserve and, the United States Air Force Active and Reserve components The term "Driver" is being replaced with the term "Operator" throughout this publication. The term driver implies that all the Soldier must do is drive the vehicle. Today's military operator does considerably more than just drive. The term operator reflects a requirement to master every aspect of the vehicle's capabilities and limitations to include all current sub-components such as technologically advanced communications, navigation, and intercom systems, onboard material handling cranes, self-recovery winches, integrated night-vision devices, weapons support systems, onboard electronic diagnostic systems, and load responsibility. Instructions in this TC will help the wheeled vehicle operator maintain a high degree of driving efficiency. This TC does not restrict its contents to any one particular vehicle. It is a guide to normal everyday operations and to driving under difficult conditions. When more information is needed for a specific vehicle, check the technical manual written for that vehicle.

This United States Army manual, Training Circular TC 3-20.11 Training to Proficiency Maneuver Company and Troop April 2021, provides a detailed description of the maneuver force's training strategy for all company and troop-size formations to achieve fire and maneuver proficiency at home station. TC 3-20.11 includes the purpose of the integrated weapons training strategy, its standard structure, training requirements, the integration of combined arms assets, and resource requirements for the Armored, Infantry, and Stryker brigade combat teams' maneuver elements. This publication provides training principles and techniques for use by units to gain proficiency in engaging and destroying threats efficiently in any operational environment. This publication includes all the required planning and preparation for a successful unit weapons training program. Where vehicle- or weapon-specific techniques in this training circular conflict with technical manuals (TMs), the readers should follow the procedures in the TM. The principal audience for TC 3-20.11 is all members of the profession of arms. Commanders and staffs of Army headquarters serving as joint task force or multinational headquarters should also refer to applicable joint or multinational doctrine concerning the range of military operations and joint or multinational forces. Trainers and educators throughout the Army will also use this publication.

FM 21-11 1943: Basic field manual, first aid for soldiers.(OBSOLETE) "The purpose of this manual is to teach the soldier what he can do for himself or a fellow soldier if injury or sickness occurs when no medical officer or Medical Department soldier is nearby. Information is also given concerning the use of certain supplies which are for the purpose of helping to keep well. This field manual addresses wounds, fractures/dislocations/ sprains, common emergencies and health measures, effects of severe cold and heat, measures for use in the jungle/tropics and in aircraft and tank injuries, transportation of sick and injured, war gases, and description and uses of first-aid kits and packets.