In this report the topological and geometrical aspects of the circuit layout problem are compared. A circuit layout procedure, based on topological factors, is presented. Whereas most circuit layout procedures are concerned mainly with geometrical aspects, the method described in this report attempts to find a topologically feasible solution to the problem first. From this topological layout, a physical layout is obtained in a second phase. This method can be especially useful for problems where a complete (100%) layout is mandatory. (Author).

Change is one of the most significant parameters in our society. Designers are amongst the primary change agents for any society. As a consequence design is an important research topic in engineering and architecture and related disciplines, since design is not only a means of change but is also one of the keystones to economic competitiveness and the fundamental precursor to manufacturing. The development of computational models founded on the artificial intelligence paradigm has provided an impetus for much of current design research -both computational and cognitive. These forms of design research have only been carried out in the last decade or so and in the temporal sense they are still immature. Notwithstanding this immaturity, noticeable advances have been made both in extending our understanding of design and in developing tools based on that understanding. Whilst many researchers in the field of artificial intelligence in design utilise ideas about how humans design as one source of concepts there is normally no attempt to model human designers. Rather the results of the research presented in this volume demonstrate approaches to increasing our understanding of design as a process.

The last decade has brought explosive growth in the technology for manufac turing integrated circuits. Integrated circuits with several hundred thousand transistors are now commonplace. This manufacturing capability, combined with the economic benefits of large electronic systems, is forcing a revolution in the design of these systems and providing a challenge to those people in terested in integrated system design. Modern circuits are too complex for an individual to comprehend completely. Managing tremendous complexity and automating the design process have become crucial issues. Two groups are interested in dealing with complexity and in developing algorithms to automate the design process. One group is composed of practi tioners in computer-aided design (CAD) who develop computer programs to aid the circuit-design process. The second group is made up of computer scientists and mathemati'::~l\ns who are interested in the design and analysis of efficient combinatorial aJ::,orithms. These two groups have developed separate bodies of literature and, until recently, have had relatively little interaction. An obstacle to bringing these two groups together is the lack of books that discuss issues of importance to both groups in the same context. There are many instances when a familiarity with the literature of the other group would be beneficial. Some practitioners could use known theoretical results to improve their "cut and try" heuristics. In other cases, theoreticians have published impractical or highly abstracted toy formulations, thinking that the latter are important for circuit layout.

First published in 1991, this thesis concentrates upon the design of three-dimensional, rather than the traditional two-dimensional, circuits. The theory behind such circuits is presented in detail, together with experimental results.

This book targets custom IC designers who are encountering variation issues in their designs, especially for modern process nodes at 45nm and below, such as statistical process variations, environmental variations, and layout effects. It teaches them the state-of-the-art in Variation-Aware Design tools, which help the designer to analyze quickly the variation effects, identify the problems, and fix the problems. Furthermore, this book describes the algorithms and algorithm behavior/performance/limitations, which is of use to designers considering these tools, designers using these tools, CAD researchers, and CAD managers.

This book covers the fundamental knowledge of layout design from the ground up, addressing both physical design, as generally applied to digital circuits, and analog layout. Such knowledge provides the critical awareness and insights a layout designer must possess to convert a structural description produced during circuit design into the physical layout used for IC/PCB fabrication. The book introduces the technological know-how to transform silicon into functional devices, to understand the technology for which a layout is targeted (Chap. 2). Using this core technology knowledge as the foundation, subsequent chapters delve deeper into specific constraints and aspects of physical design, such as interfaces, design rules and libraries (Chap. 3), design flows and models (Chap. 4), design steps (Chap. 5), analog design specifics (Chap. 6), and finally reliability measures (Chap. 7). Besides serving as a textbook for engineering students, this book is a foundational reference for today’s circuit designers. For Slides and Other Information: https://www.ifte.de/books/pd/index.html

Despite the fact that in the digital domain, designers can take full benefits of IPs and design automation tools to synthesize and design very complex systems, the analog designers’ task is still considered as a ‘handcraft’, cumbersome and very time consuming process. Thus, tremendous efforts are being deployed to develop new design methodologies in the analog/RF and mixed-signal domains. This book collects 16 state-of-the-art contributions devoted to the topic of systematic design of analog, RF and mixed signal circuits. Divided in the two parts Methodologies and Techniques recent theories, synthesis techniques and design methodologies, as well as new sizing approaches in the field of robust analog and mixed signal design automation are presented for researchers and R/D engineers.