Why MSP432? The MSP430 is a popular microcontroller designed and marketed by the Texas Instruments (TI). It comes with some powerful peripherals such as ADC, Timer, SPI, I2C, UART, and so on. It has a 16-bit proprietary RISC architecture meaning only TI makes the products. Due to popularity of ARM architecture, many semiconductor design companies are moving away from proprietary architecture and adopting the ARM as the CPU of choice in all their designs. This is the case with MSP430. The MSP432 is an ARM version of the MSP430. In other words, all the MSP430 peripherals are moved to MSP432 with ARM instructions and architecture as the core processor. Another major feature of the MSP432 is its lower power consumption which makes it an ideal microcontroller for use in designing low power devices with IoT. See the link below: http: //www.ti.com/lsds/ti/microcontrollers_16-bit_32-bit/msp/low_power_performance/msp432p4x/overview.page Why this book? While there are several MSP430 textbooks on the market, currently there is only one textbook for MSP432. This textbook covers the details of the MSP432 peripherals such as ADC, Timer, SPI, I2C and so on with ARM programs. It also includes the programs for interfacing of MSP432 to LCD, Serial COM port, DC motor, stepper motor, sensors, and graphics LCD. All the programs in the book are tested using the MSP432 LaunchPad trainer board from TI. See the link below: http: //www.ti.com/tool/MSP-EXP432P401R#buy

This book provides a thorough introduction to the Texas Instruments MPS432TM microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432. The MSP432 LaunchPad is supported by a host of technical data, application notes, training modules, and software examples. All are encapsulated inside one handy package called MSPWare, available as both a stand-alone download package as well as on the TI Cloud development site: dev.ti.com The features of the MSP432 may be extended with a full line of BoosterPack plug-in modules. The MSP432 is also supported by a variety of third party modular sensors and software compiler companies. In the back, a thorough introduction to the MPS432 line of microcontrollers, programming techniques, and interface concepts are provided along with considerable tutorial information with many illustrated examples. Each chapter provides laboratory exercises to apply what has been presented in the chapter. The book is intended for an upper level undergraduate course in microcontrollers or mechatronics but may also be used as a reference for capstone design projects. Practicing engineers already familiar with another microcontroller, who require a quick tutorial on the microcontroller, will also find this book very useful. Finally, middle school and high school students will find the MSP432 highly approachable via the Energia rapid prototyping system.

To write programs for Arm microcontrollers, you need to know both Assembly and C languages. The book covers Assembly language programming for Cortex-M series using Thumb-2. Now, most of the Arm Microcontrollers use the Thumb-2 instruction set. The ARM Thumb-2 Assembly language is standard regardless of who makes the chip. However, the ARM licensees are free to implement the on-chip peripheral (ADC, Timers, I/O, etc.) as they choose. Since the ARM peripherals are not standard among the various vendors, we have dedicated a separate book to each vendor. Some of them are: TI Tiva ARM Programming For Embedded Systems: Programming ARM Cortex-M4 TM4C123G with C (Mazidi & Naimi Arm Series)TI MSP432 ARM Programming for Embedded Systems (Mazidi & Naimi Arm Series)The STM32F103 Arm Microcontroller and Embedded Systems: Using Assembly and C (Mazidi & Naimi Arm Series)STM32 Arm Programming for Embedded SystemsAtmel ARM Programming for Embedded Systems For more information see the following websites: www.NicerLand.comwww.MicroDigitalEd.com

This book can assist you to learn about embedded systems using an MSP432 microcontroller. This fourth edition was written based on the use of an MSP432P401R MCU and Code Composer Studio. This book can be used as one of the supporting materials for microcontroller and embedded system courses. This book covers MSP432P4, GPIO, timers, display, interrupt, and ADC. Moreover, this book covers topics of software architectures, PWM, motor control, serial communications, TI Driver library, TI RTOS, Power management, and embedded system security. This book was written for undergraduate engineering students and the audience with prior knowledge about microcontroller applications.

This book provides a thorough introduction to the Texas Instruments MPS432(tm) microcontroller. The MPS432 is a 32-bit processor with the ARM Cortex M4F architecture and a built-in floating point unit. At the core, the MSP432 features a 32-bit ARM Cortex-M4F CPU, a RISC-architecture processing unit that includes a built-in DSP engine and a floating point unit. As an extension of the ultra-low-power MSP microcontroller family, the MSP432 features ultra-low power consumption and integrated digital and analog hardware peripherals. The MSP432 is a new member to the MSP family. It provides for a seamless transition to applications requiring 32-bit processing at an operating frequency of up to 48 MHz. The processor may be programmed at a variety of levels with different programming languages including the user-friendly Energia rapid prototyping platform, in assembly language, and in C. A number of C programming options are also available to developers, starting with register-level access code where developers can directly configure the device's registers, to Driver Library, which provides a standardized set of application program interfaces (APIs) that enable software developers to quickly manipulate various peripherals available on the device. Even higher abstraction layers are also available, such as the extremely user-friendly Energia platform, that enables even beginners to quickly prototype an application on MSP432.

1) Our ARM book series The ARM CPU is licensed and produced by hundreds of companies. The ARM Assembly language instructions and architectures are standardized and all the licensees must follow them. The first volume of this series (ARM Assembly Language Programming & Architecture by Mazidi & Naimi) covers the Assembly language programming, instructions, and architecture of the ARM and can be used with any ARM chip, regardless of the chip maker. Since the licensees are free to design and implement their own peripherals, the peripherals of ARM chips vary greatly among the licensees. For this reason, we have dedicated a separate volume to each licensee. This volume covers the peripheral programming of Texas Instruments (TI) ARM Tiva C series. Throughout the book, we use C language to program the Tiva C Series TM4C123G chip peripherals. We use TM4C123G LaunchPad(TM) Evaluation Kit which is based on ARM(R) Cortex(R)-M4F MCU. See our website for tutorials and support materials: http: //www.MicroDigitalEd.com/ARM/TI_ARM_books.htm 2) Who will use our ARM textbooks? The primary audience of our textbook on ARM is undergraduate and graduate engineering students in Electrical and Computer Engineering departments. We assume no background in microcontroller and embedded systems programming. It can also be used by embedded system programmers who want to move away from 8- and 16-bit legacy chips such as the 8051, AVR, PIC, and HCS08/12 family of microcontrollers to ARM. Designers of the x86-based systems wanting to design ARM-based embedded systems can also benefit from this series. See our website for other titles for ARM Programming and Embedded Systems: http: //www.MicroDigitalEd.com/ARM/ARM_books.htm

This book, now in its 6th printing, is the first in a series of three books that teach the fundamentals of embedded systems as applied to the MSP432 of microcontroller. This first book is an introduction to computers and interfacing focusing on assembly language and C programming. This book can be used with Texas Instruments Robot Systems Learning Kit. The second book Embedded Systems: Real-Time Interfacing to the MSP432 Microcontroller focuses on hardware/software interfacing and the design of embedded systems. This first book is an introductory book that could be used at the college level with little or no prerequisites. An embedded system is a system that performs a specific task and has a computer embedded inside. A system is comprised of components and interfaces connected together for a common purpose. This book is an introduction to embedded systems. Specific topics include microcontrollers, fixed-point numbers, the design of software in assembly language and C, elementary data structures, programming input/output including interrupts, analog to digital conversion, digital to analog conversion. This book employs many approaches to learning. It will not include an exhaustive recapitulation of the information in data sheets. First, it begins with basic fundamentals, which allows the reader to solve new problems with new technology. Second, the book presents many detailed design examples. These examples illustrate the process of design. There are multiple structural components that assist learning. Checkpoints, with answers in the back, are short easy to answer questions providing immediate feedback while reading. Simple homework, with answers to the odd questions on the web, provides more detailed learning opportunities. The book includes an index and a glossary so that information can be searched. The most important learning experiences in a class like this are of course the laboratories. Each chapter has suggested lab assignments. More detailed lab descriptions are available on the web. Specifically for this volume, look at the lab assignments for EE319K. For Volume 2, refer to the EE445L labs. There is a web site accompanying this book http: //users.ece.utexas.edu/ valvano/arm/msp432.htm. Posted here are ARM Keil uVision and Texas Instruments Code Composer Studio projects for each of the example programs in the book. You will also find data sheets and Excel spreadsheets relevant to the material in this book. The book will cover embedded systems for ARM Cortex-M microcontrollers with specific details on the MSP432.