The Surface Wettability Effect on Phase Change collects high level contributions from internationally recognised scientists in the field. It thoroughly explores surface wettability, with topics spanning from the physics of phase change, physics of nucleation, mesoscale modeling, analysis of phenomena such drop evaporation, boiling, local heat flux at triple line, Leidenfrost, dropwise condensation, heat transfer enhancement, freezing, icing. All the topics are treated by discussing experimental results, mathematical modeling and numerical simulations. In particular, the numerical methods look at direct numerical simulations in the framework of VOF simulations, phase-field simulations and molecular dynamics. An introduction to equilibrium and non-equilibrium thermodynamics of phase change, wetting phenomena, liquid interfaces, numerical simulation of wetting phenomena and phase change is offered for readers who are less familiar in the field. This book will be of interest to researchers, academics, engineers, and postgraduate students working in the area of thermofluids, thermal management, and surface technology.

The Surface Wettability Effect on Phase Change collects high level contributions from internationally recognised scientists in the field. It thoroughly explores surface wettability, with topics spanning from the physics of phase change, physics of nucleation, mesoscale modeling, analysis of phenomena such drop evaporation, boiling, local heat flux at triple line, Leidenfrost, dropwise condensation, heat transfer enhancement, freezing, icing. All the topics are treated by discussing experimental results, mathematical modeling and numerical simulations. In particular, the numerical methods look at direct numerical simulations in the framework of VOF simulations, phase-field simulations and molecular dynamics. An introduction to equilibrium and non-equilibrium thermodynamics of phase change, wetting phenomena, liquid interfaces, numerical simulation of wetting phenomena and phase change is offered for readers who are less familiar in the field. This book will be of interest to researchers, academics, engineers, and postgraduate students working in the area of thermofluids, thermal management, and surface technology.

The heat transfer and analysis on laser beam, evaporator coils, shell-and-tube condenser, two phase flow, nanofluids, complex fluids, and on phase change are significant issues in a design of wide range of industrial processes and devices. This book includes 25 advanced and revised contributions, and it covers mainly (1) numerical modeling of heat transfer, (2) two phase flow, (3) nanofluids, and (4) phase change. The first section introduces numerical modeling of heat transfer on particles in binary gas-solid fluidization bed, solidification phenomena, thermal approaches to laser damage, and temperature and velocity distribution. The second section covers density wave instability phenomena, gas and spray-water quenching, spray cooling, wettability effect, liquid film thickness, and thermosyphon loop. The third section includes nanofluids for heat transfer, nanofluids in minichannels, potential and engineering strategies on nanofluids, and heat transfer at nanoscale. The forth section presents time-dependent melting and deformation processes of phase change material (PCM), thermal energy storage tanks using PCM, phase change in deep CO2 injector, and thermal storage device of solar hot water system. The advanced idea and information described here will be fruitful for the readers to find a sustainable solution in an industrialized society.

Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa

Provides a comprehensive coverage of the basic phenomena. It contains twenty-five chapters which cover different aspects of boiling and condensation. First the specific topic or phenomenon is described, followed by a brief survey of previous work, a phenomenological model based on current understanding, and finally a set of recommended design equa

This Handbook provides researchers, faculty, design engineers in industrial R&D, and practicing engineers in the field concise treatments of advanced and more-recently established topics in thermal science and engineering, with an important emphasis on micro- and nanosystems, not covered in earlier references on applied thermal science, heat transfer or relevant aspects of mechanical/chemical engineering. Major sections address new developments in heat transfer, transport phenomena, single- and multiphase flows with energy transfer, thermal-bioengineering, thermal radiation, combined mode heat transfer, coupled heat and mass transfer, and energy systems. Energy transport at the macro-scale and micro/nano-scales is also included. The internationally recognized team of authors adopt a consistent and systematic approach and writing style, including ample cross reference among topics, offering readers a user-friendly knowledgebase greater than the sum of its parts, perfect for frequent consultation. The Handbook of Thermal Science and Engineering is ideal for academic and professional readers in the traditional and emerging areas of mechanical engineering, chemical engineering, aerospace engineering, bioengineering, electronics fabrication, energy, and manufacturing concerned with the influence thermal phenomena.

This comprehensive textbook highlights features of two phase flows and introduces the readers to flow patterns and flow maps. It covers a wide range of fundamental and complex subjects focusing on phase change processes like boiling, condensation or cavitation, and boiling phenomenon starting from pool boiling curves to heat transfer under nucleate boiling, film, and flow boiling. It also discusses themes such as numerical techniques for solving boiling and condensation as well as equipment used in industry for evaporation, boiling, and condensation. It includes pedagogical aspects such as end-of-chapter problems and worked examples to augment learning and self-testing. This book is a valuable addition for students, researchers, and practicing engineers.