Where flow is limited but high heads of water are available the Pelton wheel is one of the most useful turbines. It can be fabricated in small engineering shops with basic facilities. Jeremy Thake explains how to design, make and use them.

Micro-Hydro Design Manual has grown from Intermediate Technology's field experiences with micro-hydro installations and covers operation and maintenance, commissioning, electrical power, induction generators, electronic controllers, management, and energy surveys.There is an increasing need in many countries for power supplies to rural areas, partly to support industries, and partly to provide illumination at night. Government authorities are faced with the very high costs of extending electricity grids. Often micro-hydro provides an economic alternative to the grid. This is because independentmicro-hydro schemes save on the cost of grid transmission lines, and because grid extension schemes often have very expensive equipment and staff costs. In contrast, micro-hydro schemes can be designed and built by local staff andsmaller organizations following less strict regulations and using 'off-the-shelf' components or locally made machinery.

further chapters cover specific aspects of turbine types for hydro, not previously covered thoroughly by published material new title for successful Planning & Installing series

This book provides users, pump manufactures, engineers, researchers and students with extensive information about pump’s behavior in reverse operation. It reports on cutting-edge methods for selecting the proper PAT and improving PAT’s efficiency, discusses PAT’s reliability, economic issues and environmental impact as well. The book describes in detail electromechanical equipment of PAT systems, their installation and operation, and gives important practical insight into the use of PAT in water transmission and distribution systems, as part of thermal power plants and cooling systems, in oil distribution systems and other systems as well. It reports on different types on PAT control modes as well as on numerical methods useful for PAT analysis and implementation. All in all, the book represents a comprehensive practice-oriented reference-guide to design engineers, as well as PAT general users and manufactures. It also provides researchers with extensive technical information on the use of PAT thus fostering new discussions and ideas to improve current methods and cope with future challenges.

This second volume of Energy Resources and Systems is focused on renewable energy resources. Renewable energy mainly comes from wind, solar, hydropower, geothermal, ocean, bioenergy, ethanol and hydrogen. Each of these energy resources is important and growing. For example, high-head hydroelectric energy is a well established energy resource and already contributes about 20% of the world’s electricity. Some countries have significant high-head resources and produce the bulk of their electrical power by this method. However, the bulk of the world’s high-head hydroelectric resources have not been exploited, particularly by the underdeveloped countries. Low-head hydroelectric is unexploited and has the potential to be a growth area. Wind energy is the fastest growing of the renewable energy resources for the electricity generation. Solar energy is a popular renewable energy resource. Geothermal energy is viable near volcanic areas. Bioenergy and ethanol have grown in recent years primarily due to changes in public policy meant to encourage its usage. Energy policies stimulated the growth of ethanol, for example, with the unintended side effect of rise in food prices. Hydrogen has been pushed as a transportation fuel. The authors want to provide a comprehensive series of texts on the interlinking of the nature of energy resources, the systems that utilize them, the environmental effects, the socioeconomic impact, the political aspects and governing policies. Volume 1 on Fundamentals and Non Renewable Resources was published in 2009. It blends fundamental concepts with an understanding of the non-renewable resources that dominate today’s society. The authors are now working on Volume 3, on nuclear advanced energy resources and nuclear batteries, consists of fusion, space power systems, nuclear energy conversion, nuclear batteries and advanced power, fuel cells and energy storage. Volume 4 will cover environmental effects, remediation and policy. Solutions to providing long term, stable and economical energy is a complex problem, which links social, economical, technical and environmental issues. It is the goal of the four volume Energy Resources and Systems series to tell the whole story and provide the background required by students of energy to understand the complex nature of the problem and the importance of linking social, economical, technical and environmental issues.