The refurbishment of existing buildings is a neglected subject within sustainable architecture; attention is usually focused on new buildings. Old buildings can use large amounts of energy and provide poor internal conditions for occupants. They may have high heating demand, poor lighting, poor ventilation, solar penetration and glare, and poor control of heating and cooling. Demolition is an option but the alternative of refurbishment is starting to be seen as more sustainable in terms of architectural value, materials use, neighborhood disruption and waste disposal. Building new is more carbon intensive and carries many wider environmental impacts. In addition, the potential impact of low energy refurbishment is much greater than that for new build since there are many more existing buildings than will be built in the next 10 - 20 years, the period over which many CO2 emission targets apply.

The refurbishment of existing buildings is a crucial yet often neglected subject within sustainable architecture; attention is usually focused on new buildings. Many old buildings waste large amounts of energy and provide poor internal conditions for occupants through poor lighting, poor ventilation, solar penetration and glare, and poor control of heating and cooling. Demolition is an option but the refurbishment alternative is increasingly seen as more sustainable in terms of architectural value, materials use, neighbourhood disruption and waste disposal. In addition, the potential impact of low energy refurbishment is much greater than that for new build since there are many more buildings already in existence than will be built in the next 10 - 20 years, the period over which many CO2 emission targets apply. The Handbook of Sustainable Refurbishment: Non-Domestic Buildings offers architects, engineers and a wide range of building professionals practical advice, illustrated by real examples. It moves from principles of sustainable refurbishment to specific design and engineering guidance for a variety of circumstances. It emphasises the need for an integrated approach by showing how refurbishment measures interact with one another and with the occupants, and how performance is ultimately influenced by this interaction.

This handbook presents cutting-edge and global insights on sustainable heritage, engaging with ideas such as data science in heritage, climate change and environmental challenges, indigenous heritage, contested heritage and resilience. It does so across a diverse range of global heritage sites. Organized into six themed parts, the handbook offers cross-disciplinary perspectives on the latest theory, research and practice. Thirty-five chapters offer insights from leading scholars and practitioners in the field as well as early career researchers. This book fills a lacuna in the literature by offering scientific approaches to sustainable heritage, as well as multicultural perspectives by exploring sustainable heritage in a range of different geographical contexts and scales. The themes covered revolve around heritage values and heritage risk; participatory approaches to heritage; dissonant heritage; socio-environmental challenges to heritage; sustainable heritage-led transformation and new cross-disciplinary methods for heritage research. This book will be an invaluable resource for students and scholars in heritage studies, archaeology, museum studies, cultural studies, architecture, landscape, urban design, planning, geography and tourism.

Sustainable Refurbishment Governments across the EU and developed countries are increasingly being directed towards improving existing built stock as a key ingredient to meeting climate change challenges. This guide to green ‘retro-fitting’ for corporate real estate, facility managers and occupiers struggling to reduce their building’s carbon footprint will help in the planning and management of a sustainable refurbishment programme. Sustainable Refurbishment is structured into four parts: the first gives the context, together with an overview on sustainable development and refurbishment projects separately, and the value gained from a sustainable refurbishment. Part Two details the regulatory and financial drivers, together with market pressures, and provides an overview of where this is leading, giving the implications for sustainable refurbishment. Part Three provides technical support on carbon measures, helping to determine the feasibility of good practices as part of the refurbishment. Included is a review of energy efficiency, renewable and low carbon technologies and embodied carbon to enable lifecycle carbon calculations, together with the necessary behavioural change aspects needed to embed the changes. Linkages and benefits between the technologies will be highlighted. Part Four reviews refurbishment from a wider environmental perspective, understanding the challenges and opportunities that exist for particular developments from a materials, water, biodiversity and transport perspective. Throughout the book, checklists are provided on typical activities and best practice; these are expanded through relevant case studies and examples to show-case previous good practices and lessons learnt. The book’s structure allows a matrix approach, with Parts Three and Four containing the technical information necessary to deliver sustainable refurbishment. The book provides a much-needed link between policy-level commitment and detailed technical delivery. This easily digestible and authoritative review of the key issues in green retro-fitting is crucial for facilities managers; building surveyors; property managers/owners; and corporate real estate involved in sustainable refurbishment by offering the practical support needed to make it happen. OTHER BOOKS OF INTEREST: Sustainable Practice for the Facilities Manager Shah 978 14051 35573 Delivering Sustainable Buildings A Practical Guide for Contractors to Low Carbon, Energy Efficient and Renewable Technologies Malina 978 14051 94174 Facilities Change Management Finch 978 14051 53461 Enhancing Building Performance Mallory-Hill, et al. 978 04705 57591

The refurbishment of existing buildings is a crucial yet often neglected subject within sustainable architecture; attention is usually focused on new buildings. Many old buildings waste large amounts of energy and provide poor internal conditions for occupants through poor lighting, poor ventilation, solar penetration and glare, and poor control of heating and cooling. Demolition is an option but the refurbishment alternative is increasingly seen as more sustainable in terms of architectural value, materials use, neighbourhood disruption and waste disposal. In addition, the potential impact of low energy refurbishment is much greater than that for new build since there are many more buildings already in existence than will be built in the next 10 - 20 years, the period over which many CO2 emission targets apply. The Handbook of Sustainable Refurbishment: Non-Domestic Buildings offers architects, engineers and a wide range of building professionals practical advice, illustrated by real examples. It moves from principles of sustainable refurbishment to specific design and engineering guidance for a variety of circumstances. It emphasises the need for an integrated approach by showing how refurbishment measures interact with one another and with the occupants, and how performance is ultimately influenced by this interaction.

Whilst sustainability is already an important driver in the new building sector, this book explores how those involved in refurbishment of commercial building are moving this agenda forward. It includes chapters by developers, surveyors, cost consultants, architects, building physicists and other players, on the role they each can play in enabling refurbishment to be commercially, environmentally and socially sustainable. Case studies from northern climates show real examples of different building types, ages and uses and will demonstrate what action has been taken to create more sustainable buildings. The chapters raise and discuss all the relevant issues that need to be considered in retrofitting decision making. Changing standards, planning, process management, financing, technical issues, site organisation, commissioning and subsequent building management are all considered. The book demonstrates that buildings can be made comfortable to occupy, easy to manage and low in energy demand and environmental impact.

This book focuses on the impacts of the built environment, and how to predict and measure the benefits and consequences of changes taking place to address sustainability in the development and building industries. It draws together the best treatments of these subjects from the Leeds Sustainability Institute’s inaugural International Conference on Sustainability, Ecology, Engineering, Design for Society (SEEDS). The focus of discussion is on understanding how buildings and spaces are designed and nurtured to obtain optimal outcomes in energy efficiency and environmental impacts. In addition to examining technical issues such as modeling energy performance, emphasis is placed on the health and well-being of occupants. This holistic approach addresses the interdependence of people with the built and natural environments. The book’s contents reflect the interdisciplinary and international collaboration critical to assembly of the knowledge required for positive change.