This CD contains a 43 page report of research methods and means of qualifying coal as commercially viable in 7 out of 11 coal beds in the study area.

This report presents the results of the Utah Quaternary Fault Parameters Working Group (hereafter referred to as the Working Group) review and evaluation of Utah’s Quaternary fault paleoseismic-trenching data. The purpose of the review was to (1) critically evaluate the accuracy and completeness of the paleoseismictrenching data, particularly regarding earthquake timing and displacement, (2) where the data permit, assign consensus, preferred recurrence-interval (RI) and vertical slip-rate (VSR) estimates with appropriate confidence limits to the faults/fault sections under review, and (3) identify critical gaps in the paleoseismic data and recommend where and what kinds of additional paleoseismic studies should be performed to ensure that Utah’s earthquake hazard is adequately documented and understood. It is important to note that, with the exception of the Great Salt Lake fault zone, the Working Group’s review was limited to faults/fault sections having paleoseismic-trenching data. Most Quaternary faults/fault sections in Utah have not been trenched, but many have RI and VSR estimates based on tectonic geomorphology or other non-trench-derived studies. Black and others compiled the RI and VSR data for Utah’s Quaternary faults, both those with and without trenches.

About 2.4 billion tons of coal are available for mining in the southern Emery coalfield, Utah. This includes about 200 million tons of surface-minable coal and 2.2 billion tons of underground-minable coal. Sixty percent of the available coal identified in this study is a demonstrated resource (within 0.75 miles of a measurement location) and the remainder is less reliably identified.

This project compiles basic information on the most important geologic and infrastructural factors that would be considered when planning a new high-calcium limestone quarry such as: (1) data on existing pits and prospects, (2) chemical analyses of high-calcium limestone, (3) the extent and spatial distribution of geologic formations having good potential for high-calcium limestone production, (4) references for geologic maps covering existing pits and prospects, and analytical data points, (5) locations of transportation corridors, and (6) locations of cement and lime plants, electric power plants, coal mines, and metal smelters that are large consumers of high-calcium limestone.