The present treatise reports on theoretical investigations and test-stand measurements which were carried out in the BMW Flugmotoren GMbH in developing the hollow blade for exhaust gas turbines. As an introduction the temperature variation and the stress on a turbine blade for a gas temperature of 900 degrees and circumferential velocities of 600 meters per second are discussed. The assumptions onthe heat transfer coefficients at the blade profile are supported by tests on an electrically heated blade model. The temperature distribution in the cross section of a blade Is thoroughly investigated and the temperature field determined for a special case. A method for calculation of the thermal stresses in turbine blades for a given temperature distribution is indicated. The effect of the heat radiation on the blade temperature also is dealt with. Test-stand experiments on turbine blades are evaluated, particularly with respect to temperature distribution in the cross section; maximum and minimum temperature in the cross section are ascertained. Finally, the application of the hollow blade for a stationary gas turbine is investigated. Starting from a setup for 550 C gas temperature the improvement of the thermal efficiency and the fuel consumption are considered as well as the increase of the useful power by use of high temperatures. The power required for blade cooling is taken into account.

The subject of the development of German hollow turbine blades for use with internal cooling is discussed in detail. The development of a suitable blade profile from cascade theory is described. Also a discussion of the temperature distribution and stresses in a turbine blade is presented. Various methods of manufacturing hollow blades and the methods by which they are mounted in the turbine rotor are presented in detail.

The memorandum discusses the applications of heat-resistant metallic materials in aircraft gas turbine engines. Brief background information on the engines of each of the manufacturers is followed by a detailed discussion of the materials used in various components of the engines. Some current trends in turbine-engine materials applications are pointed out. An extensive appendix arranged according to manufacturer, lists materials used in recent and current engines and presents some brief data on size, weight, and application of each of the engines.