Since some food additives have been shown to be harmful to certain individuals, a common perception now is that all food additives are potentially dangerous. This had led to a large market for products making minimal use of additives. Tight regulatory control and labelling requirements provide further impetus for the development of these products. This book provides an authoritative and comprehensive review of the industrially important advances in the technology that allow food products to be manufactured with fewer of the additives that have been traditionally used. Also, many new natural and harmless ingredients and additives are becoming available. These are also covered to enable new product concepts to be considered. The first edition of this book was widely accepted as a key reference in this subject, and this new edition has been thoroughly revised throughout to reflect current trends and practice. The chapters on packaging, marine-derived ingredients, animal-derived ingredients and reduced-additive breadmaking have all been extensively revised and additional authors and co-authors have been recruited for the second edition. Topics such as active packaging, good manufacturing practice, HACCP and natural ingredients have been reviewed with regards to their effect on the technology of reduced-additive foods.

The food industry for many years reacted to consumer demand for more appealing and convenient food products by using additives. More recently the demands of consumers have grown to include still higher performance products but with less additives. The industry has responded accordingly. There are often significant scientific and technical obstacles to be overcome to make a product with less additives. It is these technical challenges that this book is intended to address. The approach taken in this book is to examine specific aspects of the industry where important contributions are being made to avoid or reduce additive use or to create new, natural and more acceptable additives which can replace the old ones. There is a tremendous amount of work underway in this field and to cover it comprehensively would fill many volumes. This volume addresses the areas where there has been a considerable amount of recent activity and published results. Chapter 1 covers starter cultures in dairy products, meat products and bread. The author is Professor Gunnar Mogensen, the Director of Research and Development for Chr. Hansen's Laboratorium, the fore most suppliers of starter cultures in the world. He examines developments in starter culture technology and illustrates ways in which starter cultures are replacing traditional additives in foods.

FOOD CHEMISTRY A unique book detailing the impact of food adulteration, food toxicity and packaging on our nutritional balance, as well as presenting and analyzing technological advancements such as the uses of green solvents with sensors for non-destructive quality evaluation of food. Food Chemistry: The Role of Additives, Preservatives and Adulteration is designed to present basic information on the composition of foods and the chemical and physical changes that their characteristics undergo during processing, storage, and handling. Details concerning recent developments and insights into the future of food chemical risk analysis are presented, along with topics such as food chemistry, the role of additives, preservatives, and food adulteration, food safety objectives, risk assessment, quality assurance, and control. Moreover, good manufacturing practices, food processing systems, design and control, and rapid methods of analysis and detection are covered, as well as sensor technology, environmental control, and safety. The book also presents detailed information about the chemistry of each major class of food additive and their multiple functionalities. In addition, numerous recent findings are covered, along with an explanation of how their quality is ascertained and consumer safety ensured. Audience The core audience of this book include food technologists, food chemists, biochemists, biotechnologists, food, and beverage technologists, and nanoscientists working in the field of food chemistry, food technology, and food and nanoscience. In addition, R&D experts, researchers in academia and industry working in food science/safety, and process engineers in industries will find this book extremely valuable.

Food flavour technology is of key importance for the food industry.Increasingly, food products must comply with legal requirements andconform to consumer demands for “natural” products, butthe simple fact is that, if foods do not taste good, they will notbe consumed and any nutritional benefit will be lost. Thereis therefore keen interest throughout the world in the production,utilisation and analysis of flavours. The second edition of this successful book offers a broadintroduction to the formulation, origins, analysis and performanceof food flavours, updating the original chapters and addingvaluable new material that introduces some of the newermethodologies and recent advances. The creation of flavourings is the starting point for the book,outlining the methodology and constraints faced byflavourists. Further constraints are considered in a chapterdealing with international legislation. The origins of flavours aredescribed in three chapters covering thermal generation,biogeneration and natural sources, keeping in mind the adjustmentsthat manufacturers have had to make to their raw materials andprocesses to meet the demand for natural products whilst complyingwith cost issues. Delivery of flavours using encapsulation orthrough an understanding of the properties of the food matrix isdescribed in the next two chapters, and this section is followed bychapters describing the different ways to analyse flavours usinginstrumental, modelling and sensory techniques. The book is aimedat food scientists and technologists, ingredients suppliers,quality assurance personnel, analytical chemists andbiotechnologists.

Provides a review of the existing low-calorie food technology, and that which is near to providing products for the market. Also covers regulatory considerations, nutrition and physiology. For food technologists, production managers, and new-product-development staff in the food and ingredient industries.

“When comparing this dictionary, there is very little competition at all… a very useful resource in the industrial, profession-al and supporting research areas, as well as for non-food scientists who have supervisory and management responsibility in a food area.” –Food & Beverage Reporter, Nov/Dec 2009 “I would thoroughly recommend this book to food scientists and technologists throughout the universities, research establishments and food and pharmaceutical companies. Librarians in all such establishments should ensure that they have copies on their shelves.” –International Journal of Dairy Technology, November 2009 “A must-own.” –Food Industry News, August 2009 IFIS has been producing quality comprehensive information for the world’s food science, food technology and nutrition community since its foundation in 1968 and, through its production of FSTA – Food Science and Technology Abstracts, has earned a worldwide reputation for excellence. Distilled from the extensive data held and maintained by IFIS, the dictionary is easy to use and has been rigorously edited and cross-referenced. Now in an extensively revised and updated second edition, this landmark publication features: 8,612 entries including 763 new entries and over 1,500 revised entries Reflects current usage in the scientific literature Includes local names, synonyms and Latin names, as appropriate Extensive cross-referencing Scientific editing from the team at IFIS

Reducing the intake of sodium is an important public health goal for Americans. Since the 1970s, an array of public health interventions and national dietary guidelines has sought to reduce sodium intake. However, the U.S. population still consumes more sodium than is recommended, placing individuals at risk for diseases related to elevated blood pressure. Strategies to Reduce Sodium Intake in the United States evaluates and makes recommendations about strategies that could be implemented to reduce dietary sodium intake to levels recommended by the Dietary Guidelines for Americans. The book reviews past and ongoing efforts to reduce the sodium content of the food supply and to motivate consumers to change behavior. Based on past lessons learned, the book makes recommendations for future initiatives. It is an excellent resource for federal and state public health officials, the processed food and food service industries, health care professionals, consumer advocacy groups, and academic researchers.