In an earlier book, Rheological Measurement (A. A. Collyer & D. W. Clegg, Elsevier Applied Science, 1988), the basic rheological methods of measurement presently used were discussed in the light of the basic underlying principles and current theories. The same approach is adopted in this companion book, which is concerned with some newer or more sophisticated techniques that have resulted from a fresh understanding of the subject, or as a result of improvement in computer control, data acquisition and computational power, or more simply from an industrial need, particularly with regard to process control. The first two chapters deal with the extensional flow properties of fluids and their measurement. This inclusion is in response to a greater awareness in industry of the importance of these flows. Chapter 3 intro duces and develops the subject of surface rheology and the measurement of its properties, again a subject of increasing significance. The methods of measurement of the dynamic mechanical properties of fluids and the calculation of the resulting rheological parameters are discussed in Chap ters 4-7 inclusive. The subject areas covered are: large-amplitude oscilla tory shear, a model for viscoelastic fluids and solids, a new method of measuring dynamic mechanical properties, particularly for curing sys tems, and the use of complex waveforms in dynamic mechanical analysis.

Thermal and Rheological Measurement Techniques for Nanomaterials Characterization, Second Edition covers thermal and rheological measurement techniques, including their principle working methods, sample preparation and interpretation of results. This important reference is an ideal source for materials scientists and industrial engineers who are working with nanomaterials and need to know how to determine their properties and behaviors. - Outlines key characterization techniques to determine the thermal and rheological behavior of different nanomaterials - Explains how the thermal and rheological behavior of nanomaterials affect their usage - Provides a method-orientated approach that explains how to successfully use each technique

In an area as vast and important as rheology, it is essential that the experimentalist understands the underlying theories and shortcomings of the measurement technique used, that they are aware of the likely microstructure of the fluid under study and that from this they can appreciate how the fluid and the measuring system interact with each other. This major handbook, written by an international group of experts in the range of rheological techniques, presents the state of the art in rheological measurement, and concentrates on the techniques and underlying physical principles. The second edition, fully revised and updated to include new techniques is invaluable to polymer and materials scientists, engineers and technologists, and anyone else making rheological measurements on materials whether they be polymeric, biological, slurries, food or other complex fluids.

The reduction of the fire hazard of fuel is critical to improving survivability in impact-survivable aircraft accidents. Despite current fire prevention and mitigation approaches, fuel flammability can overwhelm post-crash fire scenarios. The Workshop on Aviation Fuels with Improved Fire Safety was held November 19-20, 1996 to review the current state of development, technological needs, and promising technology for the future development of aviation fuels that are most resistant to ignition during a crash. This book contains a summary of workshop discussions and 11 presented papers in the areas of fuel and additive technologies, aircraft fuel system requirements, and the characterization of fuel fires.

Introduction to rheology. Tube viscometry. Rotational viscometry. Extensional flow. Viscoelasticity.

Covering the principles of all rheological test methods, this edition has been revised and updated to include a number of new references and to describe recent developments in computer control methods, elongational flow measurement and the use of flow visualization techniques.

Estimating, modelling, controlling and monitoring the flow of concrete is a vital part of the construction process, as the properties of concrete before it has set can have a significant impact on performance. This book provides a detailed overview of the rheological behaviour of concrete, including measurement techniques, the impact of mix design, and casting.Part one begins with two introductory chapters dealing with the rheology and rheometry of complex fluids, followed by chapters that examine specific measurement and testing techniques for concrete. The focus of part two is the impact of mix design on the rheological behaviour of concrete, looking at additives including superplasticizers and viscosity agents. Finally, chapters in part three cover topics related to casting, such as thixotropy and formwork pressure.With its distinguished editor and expert team of contributors, Understanding the rheology of concrete is an essential reference for researchers, materials specifiers, architects and designers in any section of the construction industry that makes use of concrete, and will also benefit graduate and undergraduate students of civil engineering, materials and construction. - Provides a detailed overview of the rheological behaviour of concrete, including measurement techniques, casting and the impact of mix design - The estimating, modelling, controlling and monitoring of concrete flow is comprehensively discussed - Chapters examine specific measurement and testing techniques for concrete, the impact of mix design on the rheological behaviour of concrete, particle packaging and viscosity-enhancing admixtures