Inhaltsangabe:Introduction: Rapid industrialisation and growth in population over the past two hundred years exert an increasing pressure on natural resources and the environment. Billions of tons of controlled and scheduled waste are generated every year by the industrial sector worldwide which is often either pre-treated on-site or at a licensed contractor prior to disposal in landfills. This practice if continued is leading to resource depletion and creates a potentially harmful legacy for future generations. In order to move towards a more sustainable development as outlined in the Bruntland Report, waste reduction, reuse and recycling coupled with pollution prevention measures play an important part to slow down if not reverse this practice. Heavy metals such as cadmium, mercury, lead and chromium are not degradable or renewable like biomass hence if they are to be used in future processes reuse and recycling are the only options. At present, heavy metals are used in the chemical industry sector for applications ranging from batteries to catalysts and surface coatings, and can be found at various concentrations in gaseous, liquid or solid waste. Chromium is of particular interest owing to its legislative status and unique chemistry. Chromium exists in nature primarily in one of two oxidation states. There are other chemical oxidation states of chromium, which include 0, II, IV, and V, but they are considered transitory compared to more stable Cr(III) and Cr(VI) species. Hexavalent chromium is a strong oxidizer which can react with DNA causing mutation, while the trivalent, organically complex form is a dietary supplement to help with proper glucose metabolism, weight loss and muscle tone. Unlike many other metals, Cr(VI) can combine with oxygen to form water-soluble, negatively charged anions known as yellow chromate (CrO42-) or orange dichromate (Cr2O72-), which adsorb to positively charged sites in contrast to cationic metal species. Therefore, hexavalent chromium species are not strongly bonded in many soils under alkaline to slightly acidic conditions, for example. Thus, they can be very mobile in subsurface environment while other metals precipitated out and exert toxic effects on biological systems. Various well-established methods may be used to treat industrial effluents and contaminated water such as reduction and precipitation, reverse osmosis, evaporation, ion exchange and adsorption. While these processes are able to remove [...]

The book gathers high-quality research papers presented at the Seventh International Conference on Solid Waste Management, held at Professor Jayashankar Telangana State Agricultural University, Hyderabad on December 15–17, 2017. The Conference, IconSWM 2017, is an official side event of the high-level Intergovernmental Eighth Regional 3R Forum in Asia and the Pacific. As a pre-event of the Eighth Regional 3R Forum, it also aims to generate scientific inputs to the policy consultation of the Eighth Regional 3R Forum co-organized by the UNCRD/UNDESA, MoEFCC India, MOUD India and MOEJ, Japan. Researchers from more than 30 countries presented their work on Solid Waste Management. The book is divided into three volumes and addresses various issues related to innovation and implementation in sustainable waste management, segregation, collection, transportation of waste, treatment technologies, policy and strategies, energy recovery and resource circulation, life cycle analysis, climate change, research and business opportunities.

Metal contamination in the environment is a persisting global issue. The metal reservoirs in the earth have declined due to society’s needs and due to uncontrolled mining activities. Therefore, the idea to recover metals from waste streams has emerged. In this thesis, cost competitive technologies such as adsorption using agro-wastes and precipitation using an inverse fluidized bed (IFB) reactor were investigated, with special emphasis on the recovery of base metals. Groundnut shell showed good potential for metal (Cu, Pb and Zn) removal. From artificial neural network modeling, the performance of the sulfate reducing bacteria (SRB) was found to be strongly pH dependent; the removal efficiency of Cu and Zn in the IFB at pH 5.0 was >97%. Electronic waste is a good candidate as secondary metal resource. The recovery of Cu from computer printed circuited boards (PCBs) using biogenic sulfide precipitation was investigated as well. Using this technology, Cu could be recovered at ~0.48 g Cu/g PCBs.

Low Cost Wastewater Bioremediation Technology: Innovative Treatment of Sulphate and Metal Rich Wastewater provides users with an authoritative guide on the technologies, processes and considerations needed for the treatment of Sulphate and Metal rich wastewaters. In this book, the authors not only explain the associated technologies, but also provide suitable alternatives to commercial treatment in terms of performance and cost effectiveness. As enormous quantities of sulphates and metal-rich contaminates are released into the environment each year, the technologies noted in the book provide the most eco-friendly, low cost and efficient alternatives available. - Covers the efficiency of treatment in terms of scale, efficiency and effectiveness of different bioremediation technologies for wastewater remediation - Discusses the economics of treatment and the development of suitable alternatives in terms of performance and cost effectiveness

Presenting effective, practicable strategies modeled from ultramodern technologies and framed by the critical insights of 78 field experts, this vastly expanded Second Edition offers 32 chapters of industry- and waste-specific analyses and treatment methods for industrial and hazardous waste materials-from explosive wastes to landfill leachate to wastes produced by the pharmaceutical and food industries. Key additional chapters cover means of monitoring waste on site, pollution prevention, and site remediation. Including a timely evaluation of the role of biotechnology in contemporary industrial waste management, the Handbook reveals sound approaches and sophisticated technologies for treating textile, rubber, and timber wastes dairy, meat, and seafood industry wastes bakery and soft drink wastes palm and olive oil wastes pesticide and livestock wastes pulp and paper wastes phosphate wastes detergent wastes photographic wastes refinery and metal plating wastes power industry wastes This state-of-the-art Second Edition is required reading for pollution control, environmental, chemical, civil, sanitary, and industrial engineers; environmental scientists; regulatory health officials; and upper-level undergraduate and graduate students in these disciplines.