The contamination of groundwater and subsurface soil in the United States is a widespread and challenging problem. There are estimated to be in excess of 200,000 sites requiring some form of remediation, and many of these sites potentially threaten groundwater resources. In areas where the groundwater resources are not considered at risk, there are frequently impediments to the reuse of brownfield sites. In addition, for many subsurface geological settings, conventional treatment methods, such as pump-and-treat technology, can be costly and inefficient. Emerging in situ groundwater and subsurface soil treatment technologies may provide effective, lower-cost alternatives, and it is important to fully understand all aspects of any new and innovative technology. This guidance document was developed to outline the technical and regulatory requirements of in situ chemical oxidation (ISCO), a group of technologies involving various combinations of oxidants and delivery techniques. The primary oxidants addressed in this document are hydrogen peroxide, potassium and sodium permanganate, sodium persulfate, and ozone. The effectiveness of some of these oxidants can be enhanced through activation (Fenton's reagent, activated persulfate) and used in conjunction with other oxidants (perozone). Additionally, this document is intended to expedite movement to a consensus on regulatory requirements through the Interstate Technology & Regulatory Council concurrence process. It should prove useful to regulators, stakeholders, consultants, and technology implementers. The document is divided into sections consisting of technology overview and applicability, remedial investigations, safety concerns, regulatory concerns, injection design, monitoring, stakeholder concerns, and case studies. From a regulatory perspective, the most important sections of the document are identification of injection restrictions, implementation, and post-closure monitoring.

This book outlines the strategies used in the investigation, characterization, management, and restoration and remediation for various contaminated sites. It draws on real-world examples from across the globe to illustrate remediation techniques and discusses their applicability. It provides guidance for the successful corrective action assessment and response programs for any type of contaminated land problem, and at any location. The systematic protocols presented will aid environmental professionals in managing contaminated land and associated problems more efficiently. This new edition adds twelve new chapters, and is fully updated and expanded throughout.

This volume provides comprehensive up-to-date descriptions of the principles and practices of in situ chemical oxidation (ISCO) for groundwater remediation based on a decade of intensive research, development, and demonstrations, and lessons learned from commercial field applications.

"This second edition of Remediation Engineering will continue to be the seminal handbook that regulators must have on-hand to address any of the remediation issues they are grappling with daily. The book is wide-ranging, but specific enough to address any environmental remediation challenge." —Patricia Reyes, Interstate Technology Regulatory Council, Washington, DC, USA "This book offers the researcher, teacher, practitioner, student, and regulator with state-of-the-art advances in conducting site investigations and remediation for common and emerging contaminants. It is revolutionary in its approach to conducting subsurface investigation, which greatly influences a successful and appropriate response in assessing and addressing environmental risk. This book is a giant leap forward in understanding how contaminates behave and how to reduce risk to acceptable levels in the natural world." —Daniel T. Rogers, Amsted Industries Incorporated, Chicago, Illinois, USA "This text is a superb reference and a good tool for learning about state-of-the-art techniques in remediation of soil and groundwater. [It] will become a ready reference at many companies as the engineering community creates increased value from remediation efforts around the world." —John Waites, AVX Corporation, Fountain Inn, South Carolina, USA Remediation Engineering was first published in 1996 and quickly became the go-to reference for a relatively young industry, offering the first comprehensive look at the state-of-the-science in treatment technologies of the time and the contaminants they applied to. This fully updated Second Edition will capture the fundamental advancements that have taken place during the last two decades within all the subdisciplines that form the foundation of the remediation engineering platform. It covers the entire spectrum of current technologies that are employed in the industry and also discusses future trends and how practitioners should anticipate and adapt to those needs. Features: Shares the latest paradigms in remediation design approach and contaminant hydrogeology Presents the landscape of new and emerging contaminants Details the current state of the practice for both conventional technologies, such as sparging and venting Examines newer technologies such as dynamic groundwater recirculation and injection-based remedies to address both organic and inorganic contaminants. Describes the advances in site characterization concepts such as smart investigations and digital conceptual site models. Includes all-new color photographs and figures.

Tremendous progress has been made in the field of remediation technologies since the second edition of Contaminant Hydrogeology was published two decades ago, and its content is more important than ever. Recognizing the extensive advancement and research taking place around the world, the authors have embraced and worked from a larger global perspective. Boving and Kreamer incorporate environmental innovation in studying and treating groundwater/soil contamination and the transport of those contaminants while building on Fetter’s original foundational work. Thoroughly updated, expanded, and reorganized, the new edition presents a wealth of new material, including new discussions of emerging and potential contaminant sources and their characteristics like deep well injection, fracking fluids, and in situ leach mining. New sections cover BET and Polanyi adsorption potential theory, vapor transport theory, the introduction of the Capillary and Bond Numbers, the partitioning interwell tracer testing technique for investigating NAPL sites, aerial photographic interpretation, geophysics, immunological surveys, high resolution vertical sampling, flexible liner systems, groundwater tracers, and much more. Contaminant Hydrogeology is intended as a textbook in upper level courses in mass transport and contaminant hydrogeology, and remains a valuable resource for professionals in both the public and private sectors.

Sustainable Remediation of Contaminated Soil and Groundwater: Materials, Processes, and Assessment provides the remediation tools and techniques necessary for simultaneously saving time and money and maximizing environmental, social and economic benefits. The book integrates green materials, cleaner processes, and sustainability assessment methods for planning, designing and implementing a more effective remediation process for both soil and groundwater projects. With this book in hand, engineers will find a valuable guide to greener remediation materials that render smaller environmental footprint, cleaner processes that minimize secondary environmental impact, and sustainability assessment methods that can be used to guide the development of materials and processes. Addresses materials, processes, and assessment needs for implementing a successful sustainable remediation process Provides an integrated approach for the unitization of various green technologies, such as green materials, cleaner processes and sustainability assessment Includes case studies based on full-scale commercial soil and groundwater remediation projects