While aviation fatalities have thankfully fallen dramatically in recent years, the phenomena of complexity and cognitive bias have been shown to be factors in many accidents. An understanding of these phenomena promises to bring the fatality rate even lower, and a deeper understanding of commercial aircraft in the context of systems engineering will contribute to that trend. Systems Approach to the Design of Commercial Aircraft describes commercial aircraft from an advanced systems point of view, addressing complexity, cybersecurity, and systems architecting. In addition, it provides an explanation of systems engineering, describes how systems engineering forms a framework for commercial aircraft, covers how systems engineering and systems architecting relate to commercial aircraft, addresses complexity, and shows how humans fit into systems engineering and the importance for commercial aircraft. It goes onto present how cybersecurity plays an important role in the mix and how human interface fits in. The readership includes designers of aircraft, manufacturers, researchers, systems engineers, and students. Scott Jackson is a fellow of the International Council on Systems Engineering (INCOSE) and the author of Systems Engineering for Commercial Aircraft (1997 and 2015) in English and Chinese. Ricardo Moraes dos Santos is a senior systems engineer at EMBRAER S/A and an INCOSE Brazil chapter director. He works with Architecting process (Corporate) and is head of Cybersecurity and Safety (STPA Applications) at EMBRAER S/A.

The key principle of systems engineering is that an aircraft should be considered as a whole and not as a collection of parts. Another principle is that the requirements for the aircraft and its subsystems emanate from a logical set of organized functions and from economic or customer-oriented requirements as well as the regulatory requirements for certification. The resulting process promises to synthesize and validate the design of aircraft which are higher in quality, better meet customer requirements and are most economical to operate. This book is more of a how to and a why to rather than a what to guide. It stresses systems engineering is an integrated technical-managerial process that can be adapted without sacrificing quality in which risk handling and management is a major part. It explains that the systems view applies to both the aircraft and the entire air transport system. The book emphasizes that system engineering is not an added layer of processes on top of the existing design processes; it is the glue that holds all the other processes together. The readership includes the aircraft industry, suppliers and regulatory communities, especially technical, program and procurement managers; systems, design and specialty engineers (human factors, reliability, safety, etc.); students of aeronautical and systems engineering and technical management; and government agencies such as FAA and JAA.

Commercial Aircraft Hydraulic Systems: Shanghai Jiao Tong University Press Aerospace Series focuses on the operational principles and design technology of aircraft hydraulic systems, including the hydraulic power supply and actuation system and describing new types of structures and components such as the 2H/2E structure design method and the use of electro hydrostatic actuators (EHAs). Based on the commercial aircraft hydraulic system, this is the first textbook that describes the whole lifecycle of integrated design, analysis, and assessment methods and technologies, enabling readers to tackle challenging high-pressure and high-power hydraulic system problems in university research and industrial contexts. Commercial Aircraft Hydraulic Systems is the latest in a series published by the Shanghai Jiao Tong University Press Aerospace Series that covers the latest advances in research and development in aerospace. Its scope includes theoretical studies, design methods, and real-world implementations and applications. The readership for the series is broad, reflecting the wide range of aerospace interest and application. Titles within the series include Reliability Analysis of Dynamic Systems, Wake Vortex Control, Aeroacoustics: Fundamentals and Applications in Aeropropulsion Systems, Computational Intelligence in Aerospace Engineering, and Unsteady Flow and Aeroelasticity in Turbomachinery. - Presents the first book to describe the interface between the hydraulic system and the flight control system in commercial aircraft - Focuses on the operational principles and design technology of aircraft hydraulic systems, including the hydraulic power supply and actuation system - Includes the most advanced methods and technologies of hydraulic systems - Describes the interaction between hydraulic systems and other disciplines

This book discusses the multiple systems that make commercial jet travel safe and convenient. The author starts by tracing the evolution of commercial jets from the Boeing 707 to the double decker Airbus A380. The next 7 chapters discuss flight controls, along with the high lift surfaces (flaps and slats) that are essential to allow high speed, low drag aircraft to take-off and land. The other systems include Engines/Nacelles, Cabin Pressurization and Air Conditioning systems, Landing Gear and brakes, Fuel Systems, Instruments/Sensors, and finally Deicing systems for the wings, nacelles and external air speed sensors. Case studies describe a significant accident that arose from a failure in the various systems described. The final chapter summarizes the past 60 years of jet travel and describe how these systems have created a cheaper, safer mode of travel than any other.

The primary human activities that release carbon dioxide (CO2) into the atmosphere are the combustion of fossil fuels (coal, natural gas, and oil) to generate electricity, the provision of energy for transportation, and as a consequence of some industrial processes. Although aviation CO2 emissions only make up approximately 2.0 to 2.5 percent of total global annual CO2 emissions, research to reduce CO2 emissions is urgent because (1) such reductions may be legislated even as commercial air travel grows, (2) because it takes new technology a long time to propagate into and through the aviation fleet, and (3) because of the ongoing impact of global CO2 emissions. Commercial Aircraft Propulsion and Energy Systems Research develops a national research agenda for reducing CO2 emissions from commercial aviation. This report focuses on propulsion and energy technologies for reducing carbon emissions from large, commercial aircraftâ€" single-aisle and twin-aisle aircraft that carry 100 or more passengersâ€"because such aircraft account for more than 90 percent of global emissions from commercial aircraft. Moreover, while smaller aircraft also emit CO2, they make only a minor contribution to global emissions, and many technologies that reduce CO2 emissions for large aircraft also apply to smaller aircraft. As commercial aviation continues to grow in terms of revenue-passenger miles and cargo ton miles, CO2 emissions are expected to increase. To reduce the contribution of aviation to climate change, it is essential to improve the effectiveness of ongoing efforts to reduce emissions and initiate research into new approaches.

This third edition of Aircraft Systems represents a timely update of the Aerospace Series’ successful and widely acclaimed flagship title. Moir and Seabridge present an in-depth study of the general systems of an aircraft – electronics, hydraulics, pneumatics, emergency systems and flight control to name but a few - that transform an aircraft shell into a living, functioning and communicating flying machine. Advances in systems technology continue to alloy systems and avionics, with aircraft support and flight systems increasingly controlled and monitored by electronics; the authors handle the complexities of these overlaps and interactions in a straightforward and accessible manner that also enhances synergy with the book’s two sister volumes, Civil Avionics Systems and Military Avionics Systems. Aircraft Systems, 3rd Edition is thoroughly revised and expanded from the last edition in 2001, reflecting the significant technological and procedural changes that have occurred in the interim – new aircraft types, increased electronic implementation, developing markets, increased environmental pressures and the emergence of UAVs. Every chapter is updated, and the latest technologies depicted. It offers an essential reference tool for aerospace industry researchers and practitioners such as aircraft designers, fuel specialists, engine specialists, and ground crew maintenance providers, as well as a textbook for senior undergraduate and postgraduate students in systems engineering, aerospace and engineering avionics.