Borophosphates are intermediate compounds of systems MxOy-B2O3-P2O5-(H2O) (M = main group or transition metal) which contain complex anionic structures built of interconnected trigonal-planar BO3 and / or BO4 and PO4 groups and their partially protonated species. The main objective of the present work was to synthesize, characterize and to study the properties of new selected 3d transition metal borophosphates. The selected four elements are scandium (Sc), iron (Fe), cobalt (Co) and nickel (Ni) due to their interesting contributions to borophosphate structural chemistry. The mild hydrothermal method was employed for the syntheses. During the investigation of borophosphates containing alkali-metals and scandium, the following three compounds were prepared and structurally characterized: MISc[BP2O8(OH)] (MI = K, Rb), CsSc[B2P3O11(OH)3] The anionic partial structure of MISc[BP2O8(OH)] (MI = K, Rb) consists of the well known open-branched four-membered rings of alternating borate and phosphate tetrahedra (a loop-branched hexamer with B : P = 1 : 2). The anionic partial structure of CsSc[B2P3O11(OH)3] represents the new type of oligomer containing boron in three- and four- fold coordination (B : P = 2 : 3). This is also the first time that a BO3 group is not only linked to borate species but also to a phosphate tetrahedron. This kind of oligomer was already predicted for borates but was never observed. By this, CsSc[B2P3O11(OH)3] is a special compound with regard to the structural building principles of borates and borophosphates. The significant differences in the crystal structures of MISc[BP2O8(OH)] (MI = K, Rb) and CsSc[B2P3O11(OH)3] may be due to the higher coordination number of cesium. Thermal treatment (up to 1000 ðC) of these compounds resulted in white crystalline products containing new phases with unknown crystal structures. Besides the discovery of alkali-metal scandium borophosphates, five new alkali metal scandium hydrogenphosphates were synthesized and st.

In this thesis, solid state reactions of Ln2O3, Y2O3, B2O3 and (NH4)2HPO4 were investigated to synthesize LnBP2O8 (Ln= Dy, Ho, Er) and YBP2O8 type of borophosphates which were not reported before. The products were analyzed by XRD, IR, DTA, SEM and EDX methods. In the first part of this thesis, synthesis of YBP2O8 through the solid state reaction of Y2O3 + 4(NH4)2HPO4 + B2O3 have been studied in the range 800-1140 °C. Orthophosphates of Dysprosium, Holmium, Erbium and Yttrium have tetragonal xenotime (YPO4) or zircon (ZrSiO4) structure. Examination of X-ray powder diffraction data at 1140 ðC showed that the obtained structure was xenotime type together with weak BPO4 and Y(PO3)3 lines. The formula was calculated as YBxP1+xO4+4x through EDX and XRD data. The pattern was indexed in tetragonal system with the unit cell parameters of a= 6.8863, c= 6.016 Å and s.g. is I41/amd. In the second part of this research, synthesis of LnBP2O8 through the solid state reaction of Ln2O3 + 4(NH4)2HPO4 + B2O3 (Ln= Dy, Ho, Er) have been studied in the range 800-1200 ðC. At 1200 ðC DyBP2O8 was obtained with tetragonal structure with the unit cell parameters of a= 6.905, c= 6.051 Å and s.g. I41/amd. Using the same procedure HoBP2O8 was obtained at 1100-1200 ðC and the XRD pattern was indexed in tetragonal system with the unit cell parameters of a= 6.887, c= 6.024 Å and s.g. I41/amd. In the structural analysis of ErBP2O8 obtained by the same reaction, the system was found as tetragonal and was indexed with a= 6.849, c= 5.998 Å and s.g. I41/amd. Examination of the unit cell parameters with respect to ionic radius showed that the unit cell parameters decrease depending on the lanthanide contraction. The structures of the compounds obtained throughout this thesis were examined by IR spectroscopy and relation between the spectra and IR vibrational modes were established. The presence of bands due to BO4 in the final products revealed that Boron is in the solid solution with the tentative form.

The new borophosphates described here were synthesized under mild hydrothermal conditions (170 oC or 220 oC). Powder and single crystal X-ray diffraction were employed to determine and refine the crystal structures. DTA-TG methods were used to analyze the thermal stability. High temperature powder X-ray diffraction (HT-XRD) was applied to study the thermal behavior of products and identify the intermediate phase during the decomposition. Chemical analyses were performed to quantitatively determine the chemical composition. Magnetic properties of the compounds were investigated. 19F MAS NMR was used to check the number of fluorine positions in the crystal structure. The following compounds were prepared and characterized: (C2H10N2)[BPO4F2](C6H14N2){Zn[ZnB2P4O15(OH)2]¡P(C6H13N2)Cl} (zndabcocl) (C3H12N2){Mn[B2P3O12(OH)]} (DAP-Mn) and (C4H12N2){Mn[B2P3O12(OH)]} (PIP-Mn) (C3H12N2){FeIII6(H2O)4[B4P8O32(OH)8]}(C3H12N2)2{VIII2VIV3B2P8O38H8} (dapvbpo) K3[B5PO10(OH)3](C2H10N2)[BPO4F2] is the first fluorine-substituted borophosphate and the first borophosphate with crystal structure closely related to the pyroxene type structure. Unbranched zweier single chain {[BPO4F2]2?} represents a new type of borophosphate partial structure. zndabcoclrepresents the first organo-templated zincoborophosphate. The structure contains diaza-bicyclo[2.2.2]-octane (DABCO) which acts in its diprotonated form (H2DABCO)2+ as a pure template and in its monoprotonated form (HDABCO)+ as a ligand to Zn-positions at the borders of ribbons to complete structural motif. This compound is also the first example containing a quaternary Zn-tetrahedron (ZnO2NCl), and can formally be described as an adduct of (C6H14N2)Zn[ZnB2P4O15(OH)2] with diaza-bicyclo[2.2.2]octane-hydrochloride. The thermal behavior of zndabcocl has been studied by HT-XRD and DTA-TG in the temperature range 25?600 oC. The new phase occurring during the decomposition has been identified as HT-NH4[ZnBP2O8]. DAP-Mnand PIP-Mn contain identical f.

By browsing about 10 000 000 scientific articles of over 200 major journals mainly in a 'cover to cover approach' some 200 000 publications were selected. The extracted data is part of the following fundamental material research fields: crystal structures (S), phase diagrams (also called constitution) (C) and the comprehensive field of intrinsic physical properties (P). This work has been done systematically starting with the literature going back to 1900. The above mentioned research field codes (S, C, P) as well as the chemical systems investigated in each publication were included in the present work. The aim of the Inorganic Substances Bibliography is to provide researchers with a comprehensive compilation of all up to now published scientific publications on inorganic systems in only three handy volumes.