From the symposium (on title) held in Sparks, Nevada, April 1988. Twenty-two peer-reviewed papers are divided into sections on models and experiments (monotonic loading), and fatigue crack growth. Areas addressed include the differences in constraint for 2-D through-thickness cracks and 3-D surface

Many people find the concept of fracture and damage mechanics to be somewhat problematic, mainly because, until recently, close attention in mechanics was focused especially on the strength and resistance of materials. In this sense, to speak of fracture is as uncomfortable for some as it is to speak of a deadly disease. In confronting and preventing a fatal disease, one must understand its complexity, symptoms, and behavior; by the same token, in securing the strength of an engineering structure, one must understand the reasons and type of its potential failure. This book will provide knowledge and insights on this matter to its readers.

The importance of the nanoscale effects has been recognized in materials research for over fifty years, but it is only recently that advanced characterization and fabrication methods are enabling scientists to build structures atom-by-atom or molecule-by molecule. The understanding and control of the nanostructure has been, to a large extent, made possible by new atomistic analysis and characterization methods pioneered by transmission electron microscopy. Nano and Microstructural Design of Advanced Materials focuses on the effective use of such advanced analysis and characterization techniques in the design of materials. - Teaches effective use of advanced analysis and characterization methods at an atomistic level - Contains many supporting examples of materials in which such design concepts have been successfully applied

This book contains the fully peer-reviewed papers presented at the Third Engineering Foundation Conference on Small Fatigue Cracks, held under the chairmanship of K.S. Ravichandran and Y. Murakami during December 6-11, 1998, at the Turtle Bay Hilton, Oahu, Hawaii. This book presents a state-of-the-art description of the mechanics, mechanisms and applications of small fatigue cracks by most of the world's leading experts in this field. Topics ranging from the mechanisms of crack initiation, small crack behavior in metallic, intermetallic, ceramic and composite materials, experimental measurement, mechanistic and theoretical models, to the role of small cracks in fretting fatigue and the application of small crack results to the aging aircraft and high-cycle fatigue problems, are covered.

Offshore oil and gas production was conducted throughout the entire 20th century, but the industry's modern importance and vibrancy did not start until the early 1970s, when the North Sea became a major producer. Since then, the expansion of the offshore oil industry has been continuous and rapid. Pipelines, and more generally long tubular structures, are major oil and gas industry tools used in exploration, drilling, production, and transmission. Installing and operating tubular structures in deep waters places unique demands on them. Technical challenges within the field have spawned significant research and development efforts in a broad range of areas.Volume I addresses problems of buckling and collapse of long inelastic cylinders under various loads encountered in the offshore arena. Several of the solutions are also directly applicable to land pipelines. The approach of Mechanics of Offshore Pipelines is problem oriented. The background of each problem and scenario are first outlined and each discussion finishes with design recommendations.* New and classical problems addressed - investigated through a combination of experiments and analysis* Each chapter deals with a specific mechanical problem that is analyzed independently* The fundamental nature of the problems makes them also applicable to other fields, including tubular components in nuclear reactors and power plants, aerospace structures, automotive and civil engineering structures, naval vehicles and structures

The objective of these proceedings was to provide a platform for the exchange of information on the design, construction and operation of fusion experiments. The technology which is being developed for the next step devices and fusion reactors was also covered.