This book covers 10 surface characterization techniques divided into three sections. The first section covers the theoretical background, instrumentation and their salient features and a general understanding behind the results. The second section delves into deeper discussion of every terminology and concept. The third section is composed of 5 sets of examples from different research papers for every technique.

Oxide surface materials are widely used in many applications, in particular where chemically modified oxide surfaces are involved. Indeed, in disciplines such as separation, catalysis, bioengineering, electronics, ceramics, etc., modified oxide surfaces are very important. In all cases, the knowledge of their chemical and surface characteristics is of great importance for the understanding and eventual improvement of their performances. This book reviews the latest techniques and procedures in the characterization and chemical modification of the silica surface, presenting a unified and state-of-the-art approach to the relevant analysis techniques and modification procedures, covering 1000 references integrated into one clear concept.

The structure of a growth or an etch front on a surface is not only a subject of great interest from the practical point of view but also is of fundamental scientific interest. Very often surfaces are created under non-equilibrium conditions such that the morphology is not always smooth. In addition to a detailed description of the characteristics of random rough surfaces, Experimental Methods in the Physical Sciences, Volume 37, Characterization of Amorphous and Crystalline Rough Surface-Principles and Applications will focus on the basic principles of real and diffraction techniques for quantitative characterization of the rough surfaces. The book thus includes the latest development on the characterization and measurements of a wide variety of rough surfaces. The complementary nature of the real space and diffraction techniques is fully displayed.Key Features* An accessible description of quantitative characterization of random rough surfaces and growth/etch fronts* A detailed description of the principles, experimentation, and limitations of advanced real-space imaging techniques (such as atomic force microscopy) and diffraction techniques (such as light scattering, X-ray diffraction, and electron diffraction)* Characterization of a variety of rough surfaces (e.g., self-affine, mounded, anisotropic, and two-level surfaces) accompanied by quantitative examples to illustrate the essence of the principles* An insightful description of how rough surfaces are formed* Presentation of the most recent examples of the applications of rough surfaces in various areas

This fully updated edition provides a broad approach to the surface analysis of polymers being of high technological interest. Modern analytical techniques, potential applications and recent advances in instrumental apparatus are discussed. The self-consistent chapters are devoted to spectroscopic and microscopic techniques which represent powerful tools for the characterization of morphology and chemical, physical, mechanical properties of polymer surfaces, interfaces, and thin fi lms. Selection of techniques which can properly address very shallow depth of surfaces, spanning from few angstroms to tens of nanometers Interaction of polymer surfaces with their surroundings is pointed out as a critical issue for specifi c applications

"Outlines the scientific basis and experimental methods for a broad sample of surface analysis techniques, drawing heavily from established principles of physical and analytical chemistry. Sketches a simple low-cost method of tracking particles in three dimensions."

The function of a component part can be profoundly affected by its surface topography. There are many examples in nature of surfaces that have a well-controlled topography to affect their function. Examples include the hydrophobic effect of the lotus leaf, the reduction of fluid drag due to the riblet structure of shark skin, the directional adhesion of the gecko foot and the angular sensitivity of the multi-faceted fly eye. Surface structuring is also being used extensively in modern manufacturing. In this way many properties can be altered, for example optical, tribological, biological and fluidic. Previously, single line (profile) measurements were adequate to control manufacture of surfaces, but as the need to control the functionality of surfaces increases, there is a growing need for three-dimensional (areal) measurement and characterisation techniques. For this reason there has been considerable research, development and standardisation of areal techniques. This book will present the areal framework that is being adopted by the international community. Whereas previous books have concentrated on the measurement aspects, this book concentrates on the characterisation techniques, i.e. how to interpret the measurement data to give the appropriate (functional) information for a given task. The first part of the book presents the characterisation methods and the second part case studies that highlight the use of areal methods in a broad range of subject areas - from automobile manufacture to archaeology. Contents Introduction to Surface Topography The Areal Field Parameters The Areal Feature Parameters Areal Filtering Methods Areal Form Removal Areal Fractal Methods Choosing the Appropriate Parameter Characterisation of Individual Areal Features Multi-Scale Signature of Surface Topography Correlation of Areal Surface Texture Parameters to Solar Cell Efficiency Characterisation of Cylinder Liner Honing Textures for Production Control Characterisation of the Mechanical Bond Strength for Copper on Glass Plating Applications Inspection of Laser Structured Cams and Conrods Road Surfaces

Until comparatively recently, trace analysis techniques were in general directed toward the determination of impurities in bulk materials. Methods were developed for very high relative sensitivity, and the values determined were average values. Sampling procedures were devised which eliminated the so-called sampling error. However, in the last decade or so, a number of developments have shown that, for many purposes, the distribution of defects within a material can confer important new properties on the material. Perhaps the most striking example of this is given by semiconductors; a whole new industry has emerged in barely twenty years based entirely on the controlled distribu tion of defects within what a few years before would have been regarded as a pure, homogeneous crystal. Other examples exist in biochemistry, metallurgy, polyiners and, of course, catalysis. In addition to this of the importance of distribution, there has also been a recognition growing awareness that physical defects are as important as chemical defects. (We are, of course, using the word defect to imply some dis continuity in the material, and not in any derogatory sense. ) This broadening of the field of interest led the Materials Advisory Board( I} to recommend a new definition for the discipline, "Materials Character ization," to encompass this wider concept of the determination of the structure and composition of materials. In characterizing a material, perhaps the most important special area of interest is the surface.