This is a report on the state of the art of research on the phenomenon of the aging of asphalt-aggregate mixtures. Compared to research on the aging of asphalt cement, there has been little research on the aging of asphalt mixtures. Binder studies are considered as well as mixture sutdies, the relationship between laboratory aging tests and field performance, and the relationship between chemical composition and field performance. Recommendations are made for aging procedures which show promise for laboratory investigation. Test methods to evaluate aging are also considered. It is noted that extended heating procedures show the most promise for short-term aging and pressure oxidation and/or extended heating the most promise for long-term aging.

The level of research activity in the highway sector as a whole has declined precipitously in recent decades, whilst the challenges facing US state highway agencies have escalated. As a result, a Strategic Highway Research Program - SHRP) was initiated to establish collaboration with research bodies tackling similar highway problems in countries worldwide. This collection of reports from around the world presents SHRP`s progress towards providing research-based new products from which the international highway engineering community may benefit. SHRP concentrates on six high-priority research areas: asphaltic materials; pavement performance; cement and concrete; maintenance cost effectiveness; concrete bridge component protection systems and the chemical control of snow and ice.

This work presents the results of RILEM TC 237-SIB (Testing and characterization of sustainable innovative bituminous materials and systems). The papers have been selected for publication after a rigorous peer review process and will be an invaluable source to outline and clarify the main directions of present and future research and standardization for bituminous materials and pavements. The following topics are covered: - Characterization of binder-aggregate interaction - Innovative testing of bituminous binders, additives and modifiers - Durability and aging of asphalt pavements - Mixture design and compaction analysis - Environmentally sustainable materials and technologies - Advances in laboratory characterization of bituminous materials - Modeling of road materials and pavement performance prediction - Field measurement and in-situ characterization - Innovative materials for reinforcement and interlayer systems - Cracking and damage characterization of asphalt pavements - Recycling and re-use in road pavements This is the proceedings of the RILEM SIB2015 Symposium (Ancona, Italy, October 7-9, 2015).

This book presents the detailed results of five task groups of the RILEM technical committee TC 237-SIB on Testing and Characterization of Sustainable Innovative Bituminous Materials and Systems. It concentrates on specific new topics in asphalt binder and mixture testing, dealing with new developments in asphalt testing, in particular also in view of new innovative bituminous materials, such as hot and cold recycled mixtures, grid reinforced pavements and recycled Reclaimed Asphalt Pavements (RAP), where test methods developed for traditional asphalt concrete are not a priori applicable. The main objective is providing a basis for pre-standardization by comparing different test methods and showing ways for fundamental improvements. Thus, the book also points the way for a further advanced chemo-physical understanding of materials and their role in pavement systems relying on fundamental material properties and suitable models for describing and predicting the intrinsic mechanisms that determine the material behavior.

This book forms the Proceedings of an International RILEM Symposium, the fourth in the series, on Testing of Bituminous Mixes in Budapest, Hungary, October 1990. The aim of the Symposium is to promote tests for the characterization, design and quality control of bituminous mixes which combine the best features of traditional and modern approaches. Among the topics covered are specimen preparation, tests with unique loading (Marshall test, uniaxial tension and creep tests etc), which are used for mix design or control of mechanical properties, and tests with repeated loading, which give information on fatigue, permanent deformation and moduli, especially for mix design.

This book covers new advances in materials and methods, particularly orientated towards the optimization of energy expenditure required for the preparation of aggregates, bituminous binders and bituminous mixtures and the implications which arise with regard to the European specifications and codes of practice.