Substrate Integrated Suspended Line Circuits and Systems provides a systematic overview of the new transmission line - the substrate-integrated suspension line (SISL). It details the fundamentals and classical application examples of the SISL. The basic SISL concept and structure, various passive circuits and active circuits, and front-end sub-systems are systematically introduced. Featuring research on topics such as high-performance RF/microwave/mm-wave circuits and system, this book is ideal for researchers, engineers, scientists, scholars, educators, and students. Since transmission line is a fundamental component of microwave and mm-wave circuits, the properties of a transmission line, such as losses, size, and dispersion, are vital to the performance of the whole system. Suspended line has been proved to be an excellent transmission line, as it has attractive features such as low loss, weak dispersion, high power capacity, and low effective dielectric constant. However, Conventional waveguide suspended line circuits require metal housing to form air cavities which is Substrate Integrated Suspended Line Circuits and Systems essential to the operation of suspended lines circuits. Also, the metal shell should provide mechanical support and shielding, which contribute to large size and heavy weight. Meanwhile, precise mechanical fabrication and assembling are strongly required, which brings difficulties to the design and fabrication of conventional suspended line circuits, and the manufacturing cost of suspended line circuits increases correspondingly. In this book, we will introduce a new platform of high-performance transmission line, i.e. substrate integrated suspended line (SISL). SISL keeps all the merits of the suspended line while overcomes the drawbacks of conventional waveguide suspended line circuits. Moreover, it is self-packaged and highly integrated. The basic SISL concept and structure, various passive circuits and active circuits, and front-end sub-systems will be systematically introduced. Featuring research on topics such as high-performance RF/microwave/mm-wave circuits and system, this book is ideally designed for researchers, engineers, scientists, scholars, educators, and students.

This book delves deeply into the substrate integrated suspended line antenna technologies and evaluates its potential to replace conventional three-dimensional (3D) metal-based antennas. Over the years, studies on substrate integrated suspended line antennas have captivated engineers and scientists from the antennas and related engineering fields, all aiming to achieve low-cost and low-loss characteristics. The book establishes a fundamental framework for this topic, while emphasizing the importance of substrate integrated suspended line antennas in the wireless communication and radar systems. It is designed for undergraduate and graduate students who are interested in antenna technology, researchers investigating substrate integrated technology, and antenna engineers working on low-cost and low-loss antennas and arrays.

Recent developments in soft-computation techniques have paved the way for handling huge volumes of data, thereby bringing about significant changes and technological advancements. This book presents the proceedings of the 3rd International Conference on Emerging Current Trends in Computing & Expert Technology (COMET 2020), held at Panimalar Engineering College, Chennai, India on 6 and 7 March 2020. The aim of the book is to disseminate cutting-edge developments taking place in the technological fields of intelligent systems and computer technology, thereby assisting researchers and practitioners from both institutions and industry to upgrade their knowledge of the latest developments and emerging areas of study. It focuses on technological innovations and trendsetting initiatives to improve business values, optimize business processes and enable inclusive growth for corporates, industries and education alike. The book is divided into two sections; ‘Next Generation Soft Computing’ is a platform for scientists, researchers, practitioners and academics to present and discuss their most recent innovations, trends and concerns, as well as the practical challenges encountered in the field. The second section, ‘Evolutionary Networking and Communications’ focuses on various aspects of 5G communications systems and networking, including cloud and virtualization solutions, management technologies, and vertical application areas. It brings together the latest technologies from all over the world, and also provides an excellent international forum for the sharing of knowledge and results from theory, methodology and applications in networking and communications. The book will be of interest to all those working in the fields of intelligent systems and computer technology.

MICROWAVE INTEGRATED CIRCUIT COMPONENTS DESIGN THROUGH MATLAB® This book teaches the student community microwave integrated circuit component design through MATLAB®, helping the reader to become conversant in using codes and, thereafter, commercial software for verification purposes only. Microwave circuit theory and its comparisons, transmission line networks, S-parameters, ABCD parameters, basic design parameters of planar transmission lines (striplines, microstrips, slot lines, coplanar waveguides, finlines), filter theory, Smith chart, inverted Smith chart, stability circles, noise figure circles and microwave components, are thoroughly explained in the book. The chapters are planned in such a way that readers get a thorough understanding to ensure expertise in design. Aimed at senior undergraduates, graduates and researchers in electrical engineering, electromagnetics, microwave circuit design and communications engineering, this book: • Explains basic tools for design and analysis of microwave circuits such as the Smith chart and network parameters • Gives the advantage of realizing the output without wiring the circuit by simulating through MATLAB code • Compares distributed theory with network theory • Includes microwave components, filters and amplifiers S. Raghavan was a Senior Professor (HAG) in the Department of Electronics and Communication Engineering, National Institute of Technology (NIT), Trichy, India and has 39 years of teaching and research experience at the Institute. His interests include: microwave integrated circuits, RF MEMS, Bio MEMS, metamaterial, frequency selective surfaces (FSS), substrate integrated waveguides (SIW), biomedical engineering and microwave engineering. He has established state-of-the-art MICs and microwave research laboratories at NIT, Trichy with funding from the Indian government. He is a Fellow/Senior Member in more than 24 professional societies including: IEEE (MTT, EMBS, APS), IETE, IEI, CSI, TSI, ISSS, ILA and ISOI. He is twice a recipient of the Best Teacher Award, and has received the Life Time Achievement Award, Distinguished Professor of Microwave Integrated Circuit Award and Best Researcher Award.

Topics in Millimeter Wave Technology, Volume 1 presents topics related to millimeter wave technology, including fin-lines and passive components realized in fin-lines, suspended striplines, suspended substrate microstrips, and modal power exchange in multimode fibers. A miniaturized monopulse assembly constructed in planar waveguide with multimode scalar horn feeds is also described. This volume is comprised of five chapters; the first of which deals with the analysis and synthesis techniques for fin-lines as well as the various passive components realized in fin-line. Tapers, discontinuities, directional couplers, filters, and non-reciprocal devices are considered, along with attenuators, switches, detectors, phase modulators, mixers, and oscillators. The second chapter focuses on millimeter-wave planar integrated circuit filters, with particular reference to lowpass filter design that forms the basis for the bandpass filter design. The third chapter describes H-plane millimeter-wave planar transmission lines and circuits, along with various passive and active components realized using suspended substrate microstrips. The fourth chapter examines modal power dynamics and transmission characteristics of multimode optical fibers. The relation between a ray theory and a wave theory is also explained, and a theory of mode coupling and the modal power exchange is discussed. The book concludes with a chapter on planar waveguide versions of the classic dual-plane, amplitude-monopulse comparator realized in conjunction with a unique multimode scalar feed horn. This book will be of interest to students and practitioners of electronics and electrical engineering.

Bulletin of Electrical Engineering and Informatics (Buletin Teknik Elektro dan Informatika) ISSN: 2089-3191, e-ISSN: 2302-9285 is open to submission from scholars and experts in the wide areas of electrical, electronics, instrumentation, control, telecommunication and computer engineering from the global world. The journal publishes original papers in the field of electrical, electronics, instrumentation & control, telecommunication, computer and informatics engineering.

Infrared and Millimeter Waves, Volume 14: Millimeter Components and Techniques, Part V is concerned with millimeter-wave guided propagation and integrated circuits. In addition to millimeter-wave planar integrated circuits and subsystems, this book covers transducer configurations and integrated-circuit techniques, antenna arrays, optoelectronic devices, and tunable gyrotrons. Millimeter-wave gallium arsenide (GaAs) IMPATT diodes are also discussed. This monograph is comprised of six chapters and begins with a description of millimeter-wave integrated-circuit transducers, focusing on various designs and trade-offs and providing hardware examples. The next chapter deals with millimeter-wave planar integrated circuits based on three transmission media: microstrip lines, suspended strip lines, and fin lines. Various transmission media and substrates are first considered, followed by design considerations and performances of several integrated-circuit components, including mixers, IMPATT oscillators, frequency multipliers, switches, filters, couplers, and ferrite devices. A few selected subsystems are also discussed. The following chapters look at planar millimeter-wave antenna arrays; optoelectronic devices for millimeter waves; and the state of the art in GaAs IMPATT diode technology for both cw and pulsed modes of operation. The final chapter is devoted to the gyrotron or electron cyclotron resonance maser. This text will be a useful resource for physicists and electronics and electrical engineers.