This book originally appeared in German in 1974, under the title "Bergschadenkunde" (mining subsidence engineering), and then in Russian in 1978, published by Nedra of Moscow. When the German edition was almost out of print, Springer-Verlag decided to bring out a new edition, this time in English. For this English version the text has been thoroughly revised, enlarged, and sup plemented by over 100 new figures. The book deals with the current state of international knowl edge on strata and ground movement over mine workings, with its damaging effects on mine shafts and the land surface, and with measures for regulating mining damage in law and reducing it in practice. Discussion begins with the mine excavation underground - the cause - and ends with the damage to surface structure- the effect. Methods of roof control, including the subject of rock bursts, are not discussed, since that is a field concerned more with the safety of underground workings than with minimizing damage at the surface. Of the 500 literature references in the German edi tion, only the more important for an international readership have been retained, but no value judgement on the many pUblica tions not mentioned should be read into this. The book is principally intended as a working aid for the mine surveyor, the mining engineer, the architect, and the civil engineer. For the student and the post-graduate researcher, it of fers a summary and guide to this whole field of knowledge.

Underground coal mining disturbs both the overburden strata and the immediate floor strata. The subject of surface subsidence deals with the issues associated with the movement of overburden strata, which are the layers from the seam to the surface, where structures and water resources important to human activities are located. Surface Subsidence Engineering provides comprehensive coverage of the major issues associated with surface subsidence. The chapters are written by experts on surface subsidence in the three leading coal producing and consuming countries in the world: Australia, China and the United States. They discuss general features and terminologies, subsidence prediction, subsidence measurement techniques, subsidence impact on water bodies, subsidence damage, mitigation and control, and subsidence on abandoned coal mines. In addition, the final chapter addresses some of the unique features of surface subsidence found in Australian coal mines. The book provides information on coal seams ranging from flat to gently inclined to steep to ultra-steep seams. Written for mining engineers, geotechnical engineers and students of mining engineering, this book covers both theories and practices of surface subsidence. Unlike previous publications, it also deals with the subsidence impact on surface and groundwater bodies, crucial resources that are often neglected by subsidence researchers.

Surface subsidence is recognised as a problem in most countries, particularly those with significant mining and other underground resource extraction industries. This book addresses the problems relating to subsidence whether caused naturally, or arising from mining or other forms of underground extractive activity.The main purpose of this book is to bring together subsidence knowledge, experiences and research findings in many countries and rationalise such information especially in respect of its particular field of application. Emphasis has been given to collating field data on subsidence from different countries in order to make direct comparisons. Prediction of subsidence, particularly its occurrence and general characteristics has been seen as an important area where the book can contribute significantly in terms of reviewing available knowledge, methods, scope of application and orders of accuracy achieved. The book also examines methods of controlling subsidence and discusses the response of surface structures to and protection against subsidence.

This exciting new volume will provide a comprehensive overview of the applications of geoinformatics technology for engineers, scientists, and students to become more productive, more aware, and more responsive to global climate change issues and how to manage sustainable development of Earth's resources. Over the last few years, the stress on natural resources has increased enormously due to anthropogenic activities especially through urbanization and industrialization processes. Sustainable development while protecting the Earth's environment involves the best possible management of natural resources, subject to the availability of reliable, accurate and timely information on regional and global scales. There is an increasing demand for an interdisciplinary approach and sound knowledge on each specific resource, as well as on the ecological and socio-economic perspectives related to their use. Geoinformatics, including Remote Sensing (RS), Geographical Information System (GIS), and Global Positioning System (GPS), is a groundbreaking and advanced technology for acquiring information required for natural resource management and addressing the concerns related to sustainable development. It offers a powerful and proficient tool for mapping, monitoring, modeling, and management of natural resources. There is, however, a lack of studies in understanding the core science and research elements of geoinformatics, as well as larger issues of scaling to use geoinformatics in sustainable development and management practices of natural resources. There is also a fundamental gap between the theoretical concepts and the operational use of these advance techniques. Sustainable Development Practices Using Geoinformatics, written by well-known academicians, experts and researchers provides answers to these problems, offering the engineer, scientist, or student the most thorough, comprehensive, and practical coverage of this subject available today, a must-have for any library.

This book teaches readers ground engineering principles and related mining and risk management practices associated with underground coal mining. It establishes the basic elements of risk management and the fundamental principles of ground behaviour and then applies these to the essential building blocks of any underground coal mining system, comprising excavations, pillars, and interactions between workings. Readers will also learn about types of ground support and reinforcement systems and their operating mechanisms. These elements provide the platform whereby the principles can be applied to mining practice and risk management, directed primarily to bord and pillar mining, pillar extraction, longwall mining, sub-surface and surface subsidence, and operational hazards. The text concludes by presenting the framework of risk-based ground control management systems for achieving safe workplaces and efficient mining operations. In addition, a comprehensive reference list provides additional sources of information on the subject. Throughout, a large variety of examples show good and bad mining situations in order to demonstrate the application, or absence, of the established principles in practice. Written by an expert in underground coal mining and risk management, this book will help students and practitioners gain a deep understanding of the basic principles behind designing and conducting mining operations that are safe, efficient, and economically viable. Provides a comprehensive coverage of ground engineering principles within a risk management framework Features a large variety of examples that show good and poor mining situations in order to demonstrate the application of the established principles in practice Ideal for students and practitioners About the author Emeritus Professor Jim Galvin has a relatively unique combination of industrial, research and academic experience in the mining industry that spans specialist research and applied knowledge in ground engineering, mine management and risk management. His career encompasses directing ground engineering research groups in South Africa and Australia; practical mining experience, including active participation in the mines rescue service and responsibility for the design, operation, and management of large underground coal mines and for the consequences of loss of ground control as a mine manager; appointments as Professor and Head of the School of Mining Engineering at the University of New South Wales; and safety advisor to a number of Boards of Directors of organisations associated with mining. Awards Winner of the ACARP Excellence Research Award 2016. The Australian Coal Industry's Research Program selects recipients to receive ACARP Research and Industry Excellence Awards every two years. The recipients are selected on the recommendation of technical committees. They are honored for achievement of a considerable advance in an area of importance to the Australian coal mining industry. An important criterion is the likelihood of the results from the project being applied in mines. Winner of the Merv Harris Award from the Mine Managers Association of Australia. The Merv Harris Award is named for Merv Harris who donated money to be invested for a continuing award in 1988. With the award, the Mine Managers Association of Australia honors members of the Association who demonstrate technical achievement in the Australian Coal Mining Industry. The first award was granted in 1990, since then, only two people have received this honor. The book has received the following awards.... AGS (Australian Geomechanics Society) congratulates Dr Galvin for these awards