Recycling is an act of collecting and processing items that would otherwise be discarded as waste in order to create a new product. Recycled material is being used in an increasing number of today’s products. Waste management is primarily concerned with a wide range of wastes, including industrial, biological, household, municipal, organic, biomedical, and radioactive wastes. Human activity, such as the mining and processing of basic resources, generates waste and poses health problems that can emerge both indirectly and directly. Waste mismanagement is a serious problem on an individual and a governmental level. Nowadays, the waste disposal business is struggling to adapt to globalized consumerism, a system in which things are manufactured on one continent, purchased and used on another, and disposed of on yet another. Therefore, remediation is often subject to a variety of legal criteria, but it can also be based on evaluations of human health and environmental concerns in cases where no statutory standards exist or when standards are advisory. This book discusses recycling strategies and technologies to find solutions to waste management. Chapters address such topics as biodegradable waste, the circular economy, managing industrial and nuclear waste, and much more.

Cold in-place recycling (CIR) has become an attractive method for rehabilitating asphalt roads that have good subgrade support and are suffering distress related to non-structural aging and cracking of the pavement layer. Although CIR is widely used, its use could be expanded if its performance were more predictable. Transportation officials have observed roads that were recycled under similar circumstances perform very differently for no clear reason. Moreover, a rational mix design has not yet been developed, design assumptions regarding the structural support of the CIR layer remain empirical and conservative, and there is no clear understanding of the cause-effect relationships between the choices made during the design/construction process and the resulting performance. The objective of this project is to investigate these relationships, especially concerning the age of the recycled pavement, cumulative traffic volume, support conditions, aged engineering properties of the CIR materials, and road performance. Twenty-four CIR asphalt roads constructed in Iowa from 1986 to 2004 were studied: 18 were selected from a sample of roads studied in a previous research project (HR-392), and 6 were selected from newer CIR projects constructed after 1999. This report describes the results of comprehensive field and laboratory testing for these CIR asphalt roads. The results indicate that the modulus of the CIR layer and the air voids of the CIR asphalt binder were the most important factors affecting CIR pavement performance for high-traffic roads. For low-traffic roads, the wet indirect tensile strength significantly affected pavement performance. The results of this research can help identify changes that should be made with regard to design, material selection, and construction in order to improve the performance and cost-effectiveness of future recycled roads.

The responsibility of Task Force No. 38 was defined to be as follows: The Task Force would address the cold processing of reclaimed asphalt pavement (RAP) with or without additional additives and/or aggregates to create a rehabilitated component of the pavement structure. This report contains information on the cold recycling process, project selection and assessment, cold recycled mixture and pavement structural design, quality control and testing, guidelines for construction specifications and definitions of terms.

The purpose of this manual is to provide clear and helpful information for maintaining gravel roads. Very little technical help is available to small agencies that are responsible for managing these roads. Gravel road maintenance has traditionally been "more of an art than a science" and very few formal standards exist. This manual contains guidelines to help answer the questions that arise concerning gravel road maintenance such as: What is enough surface crown? What is too much? What causes corrugation? The information is as nontechnical as possible without sacrificing clear guidelines and instructions on how to do the job right.