When Fertl's first book, Abnormal Formation Pressures, was published by Elsevier in 1976, the topic was relatively new in book form. In the years that followed, his book became the standard work for petroleum engineers and drillers. The list of major petroleum provinces with abnormally high pore pressures has grown steadily over the years, and with it has grown our knowledge and experience. There have also been technological advances. A new book was required, but no longer could the topic be covered adequately by one person. The problems of abnormally high formation pressures encountered in the subsurface while drilling for petroleum are very diverse, involving geologists, geophysicists, reservoir engineers, drilling engineers, and borehole logging engineers. The acute anticipation of such pressures before drilling has become possible with modern technology. This book treats these developments and covers the following topics: world occurrences, the geology of abnormal pore pressures and the background theory, reservoir engineering aspects of abnormally pressured reservoirs, detection of abnormal pressures by geophysical methods before drilling and during drilling, and their evaluation after drilling. It examines the special problems of shallow hazards from shallow abnormal pressures, and relief-well engineering to control blowouts. It also examines the generation of abnormal pressures from hydrocarbon generation in the Rocky Mountains, and the distribution of abnormal pressures in south Louisiana, USA. The topics are examined from a practical point of view with a theoretical background. There is a glossary of terms, and a relevant practical conversion table. Both SI units and the conventional US oil industry units are used.

This book studies the mechanisms and causes of abnormal pressure distribution while drilling.

The association of abnormal pressures with hydrocarbon accumulations is statistically significant. Within abnormally pressured reservoirs, empirical evidence indicates that the bulk of economically recoverable oil and gas occurs in reservoirs with pressure gradients less than 0.75 psi/ft (17.4 kPa/m) and there is very little production potential from reservoirs that exceed 0.85 psi/ft (19.6 kPa/m). Abnormally pressured rocks are also commonly associated with unconventional gas accumulations where the pressuring phase is gas of either a thermal or microbial origin.

Abnormal Formation Pressures

"Nurses play a vital role in improving the safety and quality of patient car -- not only in the hospital or ambulatory treatment facility, but also of community-based care and the care performed by family members. Nurses need know what proven techniques and interventions they can use to enhance patient outcomes. To address this need, the Agency for Healthcare Research and Quality (AHRQ), with additional funding from the Robert Wood Johnson Foundation, has prepared this comprehensive, 1,400-page, handbook for nurses on patient safety and quality -- Patient Safety and Quality: An Evidence-Based Handbook for Nurses. (AHRQ Publication No. 08-0043)." - online AHRQ blurb, http://www.ahrq.gov/qual/nurseshdbk/

Knowledge of the presence of abnormally-high pressure zones (AHFP) prior to drilling into them can prevent considerable economic losses and, possibly, save human lives. The various origins (undercompaction, tectonics, etc.) of AHFPs are discussed, followed by the description of predictive techniques in clastic, carbonate and salt-bearing formations. In addition to the well-logging predictive techniques, the authors discuss smectite-illite transformation and the chemistry of interstitial solutions. Other topics covered include (a) abnormally low formation pressures and subsidence, and (b) mathematical modelling. Loss of potential production may result if AHFPs are not properly identified and evaluated. Many hydrocarbon-bearing formations with AHFPs are erroneously "condemned".This book is of interest to engineers and geologists involved in the (a) evaluation, (b) drilling in, (c) completing, and (d) producing from hydrocarbon reservoirs with AHFPs.

Applied Petroleum Geomechanics provides a bridge between theory and practice as a daily use reference that contains direct industry applications. Going beyond the basic fundamentals of rock properties, this guide covers critical field and lab tests, along with interpretations from actual drilling operations and worldwide case studies, including abnormal formation pressures from many major petroleum basins. Rounding out with borehole stability solutions and the geomechanics surrounding hydraulic fracturing and unconventional reservoirs, this comprehensive resource gives petroleum engineers a much-needed guide on how to tackle today's advanced oil and gas operations. - Presents methods in formation evaluation and the most recent advancements in the area, including tools, techniques and success stories - Bridges the gap between theory of rock mechanics and practical oil and gas applications - Helps readers understand pore pressure calculations and predictions that are critical to shale and hydraulic activity