"The U.S. Department of the Interior's Bureau of Ocean Energy Management, Regulation, and Enforcement (BOEMRE) is responsible for the orderly, safe, and environmentally responsible development of offshore renewable energy on the outer continental shelf (OCS). The Committee on Offshore Wind Energy Turbine Structural and Operating Safety that authored this report was tasked with reviewing BOEMRE's proposed approach to overseeing the design of offshore wind turbines for structural integrity. The committee was asked to review the applicability and adequacy of standards and practices that could be used for the design, fabrication and installation of offshore wind turbines. It was also asked to review the role of third-party certified verification agents (CVAs) and the expertise and qualifications needed to carry out the role of a CVA. The committee's findings are presented in the following chapters: (1) Introduction; (2) Offshore Wind Technology and Status; (3) Standards and Practices; (4) A Risk-Informed Approach to Performance Assurance; (5) Role of Third-Party Oversight and Certified Verification Agents; (6) Qualifications Needed by Certified Verification Agents; and (7) Summary of Key Findings and Recommendations."--Pub. desc.

TRB Special Report 305: Structural Integrity of Offshore Wind Turbines: Oversight of Design, Fabrication, and Installation explores the U.S. Department of the Interior's Bureau of Ocean Energy Management, Regulation, and Enforcement (BOEMRE) approach to overseeing the development and safe operation of wind turbines on the outer continental shelf, with a focus on structural safety. The committee that developed the report recommended that in order to facilitate the orderly development of offshore wind energy and support the stable economic development of this nascent industry, the United States needs a set of clear requirements that can accommodate future design development. The report recommends that BOEMRE develop a set of requirements that establish goals and objectives with regard to structural integrity, environmental performance, and energy generation. The committee found that the risks to human life and the environment associated with offshore wind farms are substantially lower than for other industries such as offshore oil and gas, because offshore wind farms are primarily unmanned and contain minimal quantities of hazardous substances. This finding implies that an approach with significantly less regulatory oversight may be taken for offshore wind farms. Under this approach, industry would be responsible for proposing sets of standards, guidelines, and recommended practices that meet the performance requirements established by BOEMRE. The domestic industry can build on standards, guidelines, and practices developed in Europe, where the offshore wind energy is further developed, but will have to fill gaps such as the need to address wave and wind loadings encountered in hurricanes. The report also includes findings and recommendations about the role that certified verification agents (third party evaluators) can play in reviewing packages of standards and project-specific proposals.

This book is open access under a CC BY 4.0 license. This volume addresses the potential for combining large-scale marine aquaculture of macroalgae, molluscs, crustaceans, and finfish, with offshore structures, primarily those associated with energy production, such as wind turbines and oil-drilling platforms. The volume offers a comprehensive overview and includes chapters on policy, science, engineering, and economic aspects to make this concept a reality. The compilation of chapters authored by internationally recognized researchers across the globe addresses the theoretical and practical aspects of multi-use, and presents case studies of research, development, and demonstration-scale installations in the US and EU.

This is a print on demand edition of a hard to find publication. Offshore wind power is poised to deliver an essential contribution to a clean, robust, and diversified U.S. energy portfolio. Capturing and using this large and inexhaustible resource has the potential to mitigate climate change, improve the environment, increase energy security, and stimulate the U.S. economy. The U.S. is now deliberating an energy policy that will have a powerful impact on the nation¿s energy and economic health for decades to come. This report provides a broad understanding of today¿s wind industry and the offshore resource, as well as the associated technology challenges, economics, permitting procedures, and potential risks and benefits. Charts and tables.

This book provides all the key information needed to design offshore structures for renewable energy applications successfully. Suitable for practicing engineers and students, the author conveys design principles and best practices in a clear, concise manner, focusing on underlying physics while eschewing complicated mathematical detail. The text connects underlying scientific theory with industry standards and practical implementation issues for offshore wind turbines, wave energy converters and current turbines. Combined concepts such as wave-wind energy platforms are discussed, as well. Coverage of design codes and numerical tools ensures the usefulness of this resource for all those studying and working in the rapidly expanding field of offshore renewable energy.

UNDERWATER INSPECTION AND REPAIR FOR OFFSHORE STRUCTURES Benefit from a much-needed, up-to-date handbook on underwater inspection and repair processes and technologies Underwater Inspection and Repair for Offshore Structures fills a gap in the literature to provide an overview of the inspection and repair processes for both steel and concrete offshore structures. Authors and noted experts on the topic John V. Sharp and Gerhard Esdal guide readers through the reasons why inspection and repair are performed and how both are linked to the management of structural integrity, statutory requirements, and various types of damage. The book addresses critical topics, including the execution and planning of inspection and repair, the tools and methods used, and their deployment underwater. The authors put particular focus on steel and concrete offshore oil and gas installations, but the content is also applicable to the substructures of offshore wind turbines. Underwater Inspection and Repair for Offshore Structures is complementary to the authors’ book Ageing and Life Extension of Offshore Structures, also from Wiley. This important book: Covers current inspection and monitoring techniques to evaluate existing structures Includes coverage of robotic (ROV) inspection and repair methods Provides an overview of repair and maintenance techniques applicable to the splash‑zone and underwater operations Written for engineers, designers, and safety auditors working with offshore structures. Underwater Inspection and Repair for Offshore Structures is a comprehensive resource for understanding how to effectively inspect and repair these vulnerable structures.