API RP 2SIM, 1st Edition, November 2014 - Structural Integrity Management of Fixed Offshore Structures. This recommended practice provides guidance for the structural integrity management (SIM) of existing fixed offshore structures used for the drilling, development, production, and storage of hydrocarbons in offshore areas. However, the general principles of SIM apply to any structure. Specific guidance is provided for the evaluation of structural damage, above- and below-water structural inspection, fitness-for-purpose assessment, risk reduction, mitigation planning, and the process of decommissioning. This recommended practice incorporates and expands on the recommendations of Section 14, "Surveys" and Section 17, "Assessment of Existing Platforms" as previously provided in API 2A-WSD, 21st Edition. See Annex A for additional information and guidelines on the provisions stated in the numbered sections of this document. The SIM process provided in this recommended practice is applicable to existing platforms installed at any location worldwide. However, the recommended practice provides specific metocean criteria, which are only applicable for use in fitness-for-purpose assessments of platforms located in the U.S. Gulf of Mexico and the U.S. West Coast. For guidelines, recommended practices, and other requirements relating to planning, designing, and constructing new fixed offshore platforms, including reuse and change-in-use of existing platforms, reference should be made to the latest edition of API 2A-WSD. For guidelines, recommended practices, and other requirements relating to planning, designing, and constructing new offshore floating production systems, including reuse and change-in-use of existing floating production systems, reference should be made to the latest edition of API 2FPS.

A comprehensive overview of managing and assessing safety and functionality of ageing offshore structures and pipelines A significant proportion, estimated at over 50%, of the worldwide infrastructure of offshore structures and pipelines is in a life extension phase and is vulnerable to ageing processes. This book captures the central elements of the management of ageing offshore structures and pipelines in the life extension phase. The book gives an overview of: the relevant ageing processes and hazards; how ageing processes are managed through the life cycle, including an overview of structural integrity management; how an engineer should go about assessing a structure that is to be operated beyond its original design life, and how ageing can be mitigated for safe and effective continued operation. Key Features: Provides an understanding of ageing processes and how these can be mitigated. Applies engineering methods to ensure that existing structures can be operated longer rather than decommissioned unduly prematurely. Helps engineers performing these tasks in both evaluating the existing structures and maintaining ageing structures in a safe manner. The book gives an updated summary of current practice and research on the topic of the management of ageing structures and pipelines in the life extension phase but also meets the needs of structural engineering students and practicing offshore and structural engineers in oil & gas and engineering companies. In addition, it should be of value to regulators of the offshore industry.

Papers presented at the Fourth International Symposium on Integrity of Offshore Structures, 2-3 July 1990, Kelvin Conference Centre, University of Glasgow, Scotland organized by the Department of Naval Architecture and Ocean Engineering and Mechanical Engineering.

While the existing literature on offshore structures touch on model testing, a comprehensive text discussing the design, construction, instrumentation, testing and analysis of the physical model is lacking. This book fills that vacuum and provides, through its survey of the theoretical and practical aspects of physical modeling, an in-depth coverage of the technology of model testing. Its usefulness runs through the entire field of engineering, reaching far beyond its focus on offshore construction; and its breadth of scope should appeal not only to engineers and naval architects but to scientists interested in structural or hydraulic testing as well.

Dynamics of Fixed Marine Structures, Third Edition proves guidance on the dynamic design of fixed structures subject to wave and current action. The text is an update of the ""UR8"" design guide ""Dynamics of Marine Structures"" with discussion of foundations, wind turbulence, offshore installations, earthquakes, and strength and fatigue. The book employs analytical methods of static and dynamic structural analysis techniques, particularly the statistical and spectral methods when applied to loading and in the calculating dynamic responses. The statistical methods are explained when used to wave, wind, and earthquake calculations, together with the problems encountered in actual applications. Of importance to fixed offshore platforms are the soil properties and foundation covering soil behavior, site investigation, testing, seabed stability, gravity structures, and the use of single piles. Methods of forecasting, measuring, and modeling of waves and currents are also presented in offshore structure construction. Basic hydrodynamics is explained in understanding wave theory, and some description is given to forecasting of environmental conditions that will affect the structures. The effects of vortex-induced vibrations on the structure are explained, and the three methods that can prevent vortex-induced oscillations are given. Wind turbulence or wind loads are analyzed against short natural period or long natural periods of structures. The transportation of offshore platforms, installation, and pile driving, including examples of the applications found in the book, are given as well. The guide is helpful for offshore engineers, designers of inshore jetties, clients needing design and analysis work, specialists related to offshore structural engineering, and students in offshore engineering.

Structural integrity and failure assessment have been considered by many fields of engineers as it is a multi-disciplinary concept. The assessment procedure vitally ensures that structural elements will remain functional throughout their service lives. Structural failure refers to the loss of structural integrity by means of loss at the component- or system-level elements. The main concern of integrity assessment is that a structural failure may be avoided at the service level by designing the structure to withstand its designated loads. Hence, for satisfactory structural performance, structural safety, failure, and interaction between them should be considered throughout the design and analysis stages. This book is a collection of chapters that provide the researcher with a comprehensive perspective on structural integrity and its sub-disciplines.

UNDERWATER INSPECTION AND REPAIR FOR OFFSHORE STRUCTURES Benefit from a much-needed, up-to-date handbook on underwater inspection and repair processes and technologies Underwater Inspection and Repair for Offshore Structures fills a gap in the literature to provide an overview of the inspection and repair processes for both steel and concrete offshore structures. Authors and noted experts on the topic John V. Sharp and Gerhard Esdal guide readers through the reasons why inspection and repair are performed and how both are linked to the management of structural integrity, statutory requirements, and various types of damage. The book addresses critical topics, including the execution and planning of inspection and repair, the tools and methods used, and their deployment underwater. The authors put particular focus on steel and concrete offshore oil and gas installations, but the content is also applicable to the substructures of offshore wind turbines. Underwater Inspection and Repair for Offshore Structures is complementary to the authors’ book Ageing and Life Extension of Offshore Structures, also from Wiley. This important book: Covers current inspection and monitoring techniques to evaluate existing structures Includes coverage of robotic (ROV) inspection and repair methods Provides an overview of repair and maintenance techniques applicable to the splash‐zone and underwater operations Written for engineers, designers, and safety auditors working with offshore structures. Underwater Inspection and Repair for Offshore Structures is a comprehensive resource for understanding how to effectively inspect and repair these vulnerable structures.