Timber, steel, and concrete are common engineering materials used in structural design. Material choice depends upon the type of structure, availability of material, and the preference of the designer. The design practices the code requirements of each material are very different. In this updated edition, the elemental designs of individual components of each material are presented, together with theory of structures essential for the design. Numerous examples of complete structural designs have been included. A comprehensive database comprising materials properties, section properties, specifications, and design aids, has been included to make this essential reading.

A Complete Guide to Masonry Materials and Structural Design Written by the former chair of the Masonry Standards Joint Committee (MSJC), this authoritative volume covers the design of masonry structures using the 2009 International Building Code and the 2008 MSJC Code and Specification. Masonry Structural Design emphasizes the strength design of masonry and includes allowable-stress provisions. Innovations such as autoclaved aerated concrete masonry (AAC) are also discussed. Real-world case studies featuring a low-rise building with reinforced concrete masonry and a four-story building with clay masonry illustrate the techniques presented in this comprehensive resource. Coverage includes: Basic structural behavior and design of low-rise, bearing wall buildings Materials used in masonry construction Code basis for structural design of masonry buildings, including seismic design Introduction of MSJC treatment of structural design Strength design of reinforced and unreinforced masonry elements Allowable-stress design of reinforced and unreinforced masonry elements Comparison of design by the allowable-stress approach versus the strength approach Lateral load analysis of shear wall structure Design and detailing of floor and roof diaphragms

Prepared by the Task Committee on Structural Design for Physical Security of the Structural Engineering Institute of ASCE. This report provides guidance to structural engineers in the design of civil structures to resist the effects of terrorist bombings. As dramatized by the bombings of the World Trade Center in New York City and the Murrah Building in Oklahoma City, civil engineers today need guidance on designing structures to resist hostile acts. The U.S. military services and foreign embassy facilities developed requirements for their unique needs, but these the documents are restricted. Thus, no widely available document exists to provide engineers with the technical data necessary to design civil structures for enhanced physical security. The unrestricted government information included in this report is assembled collectively for the first time and rephrased for application to civilian facilities. Topics include: determination of the threat, methods by which structural loadings are derived for the determined threat, the behavior and selection of structural systems, the design of structural components, the design of security doors, the design of utility openings, and the retrofitting of existing structures. This report transfers this technology to the civil sector and provides complete methods, guidance, and references for structural engineers challenged with a physical security problem.

The prime purpose of this book is to serve as a design is of considerable value in helping the classroom text for the engineering or architec student make the transition from the often sim ture student. It will, however, also be useful to plistic classroom exercises to problems of the designers who are already familiar with design real world. Problems for solution by the student in other materials (steel, concrete, masonry) but follow the same idea. The first problems in each need to strengthen, refresh, or update their capa subject are the usual textbook-type problems, bility to do structural design in wood. Design but in most chapters these are followed by prob principles for various structural materials are lems requiring the student to make structural similar, but there are significant differences. planning decisions as well. The student may be This book shows what they are. required, given a load source, to find the magni The book has features that the authors believe tude of the applied loads and decide upon a set it apart from other books on wood structural grade of wood. Given a floor plan, the student design. One of these is an abundance of solved may be required to determine a layout of struc examples. Another is its treatment of loads. This tural members. The authors have used most of book will show how actual member loads are the problems in their classes, so the problems computed. The authors have found that students, have been tested.

Structural Design for Fire Safety, 2nd edition Andrew H. Buchanan, University of Canterbury, New Zealand Anthony K. Abu, University of Canterbury, New Zealand A practical and informative guide to structural fire engineering This book presents a comprehensive overview of structural fire engineering. An update on the first edition, the book describes new developments in the past ten years, including advanced calculation methods and computer programs. Further additions include: calculation methods for membrane action in floor slabs exposed to fires; a chapter on composite steel-concrete construction; and case studies of structural collapses. The book begins with an introduction to fire safety in buildings, from fire growth and development to the devastating effects of severe fires on large building structures. Methods of calculating fire severity and fire resistance are then described in detail, together with both simple and advanced methods for assessing and designing for structural fire safety in buildings constructed from structural steel, reinforced concrete, or structural timber. Structural Design for Fire Safety, 2nd edition bridges the information gap between fire safety engineers, structural engineers and building officials, and it will be useful for many others including architects, code writers, building designers, and firefighters. Key features: • Updated references to current research, as well as new end-of-chapter questions and worked examples. •Authors experienced in teaching, researching, and applying structural fire engineering in real buildings. • A focus on basic principles rather than specific building code requirements, for an international audience. An essential guide for structural engineers who wish to improve their understanding of buildings exposed to severe fires and an ideal textbook for introductory or advanced courses in structural fire engineering.

Originally published in 1926 [i.e. 1927] under title: Steel construction; title of 8th ed.: Manual of steel construction.