Over the past decade significant progress has been achieved in the development of waste characterization and control procedures and equipment as a direct response to ever-increasing requirements for quality and reliability of information on waste characteristics. Failure in control procedures at any step can have important, adverse consequences and may result in producing waste packages which are not compliant with the waste acceptance criteria for disposal, thereby adversely impacting the repository. The information and guidance included in this publication corresponds to recent achievements and reflects the optimum approaches, thereby reducing the potential for error and enhancing the quality of the end product. -- Publisher's description.

Simple text and photographs introduce the life of George Washington Carver.

Safety and environmental impact is of uppermost concern when dealing with the movement and storage of nuclear waste. The 20 chapters in 'An Introduction to Nuclear Waste Immobilisation' cover all important aspects of immobilisation, from nuclear decay, to regulations, to new technologies and methods. Significant focus is given to the analysis of the various matrices used in transport: cement, bitumen and glass, with the greatest attention being given to glass. The last chapter concentrates on the performance assessment of each matrix, and on new developments of ceramics and glass composite materials, thermochemical methods and in-situ metal matrix immobilisation. The book thoroughly covers all issues surrounding nuclear waste: from where to locate nuclear waste in the environment, through nuclear waste generation and sources, treatment schemes and technologies, immobilisation technologies and waste forms, disposal and long term behaviour. Particular attention is paid to internationally approved and worldwide-applied approaches and technologies.* Each chapter focuses on a different matrix used in nuclear waste immobilisation: Cement, bitumen, glass and new materials.* Keeps the most important issues surrounding nuclear waste – such as treatment schemes and technologies, and disposal - at the forefront.

Provides detailed information on the handling, processing and storage techniques most widely used and recommended for waste from non-fuel-cycle activities. The report was designed to meet the needs of developing countries by focusing on the most simple, affordable and reliable techniques and discussing their advantages and limitations.

Focused attention by world leaders is needed to address the substantial challenges posed by disposal of spent nuclear fuel from reactors and high-level radioactive waste from processing such fuel. The biggest challenges in achieving safe and secure storage and permanent waste disposal are societal, although technical challenges remain. Disposition of radioactive wastes in a deep geological repository is a sound approach as long as it progresses through a stepwise decision-making process that takes advantage of technical advances, public participation, and international cooperation. Written for concerned citizens as well as policymakers, this book was sponsored by the U.S. Department of Energy, U.S. Nuclear Regulatory Commission, and waste management organizations in eight other countries.

Reliable methods for estimating the cost of a radioactive waste disposal programme are crucial to ensure that the necessary funding for completing the disposal programme is available. Estimating the cost for disposal is, however, a challenging and complex task. Disposal programmes themselves are complex and long term undertakings, and conditions can be expected to change significantly over the time span during which a disposal programme is developed and implemented. This publication provides Member States with information on developing cost estimates for a disposal programme and establishing funding mechanisms. It will help readers in becoming informed clients by familiarizing themselves with the approaches and complexities in cost estimates and funding mechanisms for disposal. The publication is applicable to all waste categories and both near surface and geological disposal. It contains relevant examples and case studies from national programmes. The cost figures are intended to give an indication of the possible cost of certain parts or aspects of the disposal programme rather than to compare different disposal programmes’ costs.

Radioactive waste management and contaminated site clean-up reviews radioactive waste management processes, technologies, and international experiences. Part one explores the fundamentals of radioactive waste including sources, characterisation, and processing strategies. International safety standards, risk assessment of radioactive wastes and remediation of contaminated sites and irradiated nuclear fuel management are also reviewed. Part two highlights the current international situation across Africa, Asia, Europe, and North America. The experience in Japan, with a specific chapter on Fukushima, is also covered. Finally, part three explores the clean-up of sites contaminated by weapons programmes including the USA and former USSR.Radioactive waste management and contaminated site clean-up is a comprehensive resource for professionals, researchers, scientists and academics in radioactive waste management, governmental and other regulatory bodies and the nuclear power industry. - Explores the fundamentals of radioactive waste including sources, characterisation, and processing strategies - Reviews international safety standards, risk assessment of radioactive wastes and remediation of contaminated sites and irradiated nuclear fuel management - Highlights the current international situation across Africa, Asia, Europe, and North America specifically including a chapter on the experience in Fukushima, Japan