Within this work a material law was developed which correctly describes the creep and relaxation characteristics of young and mature normal strength and high-strength concretes. It is based on an aging thermodynamically sound rheological model and considers the complex nonlinear creep behavior under constant and variable stresses. In case of relaxation the corresponding integral relation is solved by means of a numerical algorithm.

An innovative strengthening technique for the seismic retrofitting of masonry buildings is the fabric-reinforced cementitious matrix (FRCM). The system presented in this work is EQ-GRID, which consists of a multi-axial hybrid grid made of alkali-resistant glass and polypropylene fibres and a natural hydraulic lime mortar (NHL) as matrix. The results of the performed experimental campaign and the numerical modelling with the Equivalent frame method are presented and discussed in this work.

This work handles the seismic soil- and water structure interaction of navigation locks in the field of elastodynamics. The investigation is based on numerical analysis with the finite element method. The findings extend the results of available theories and studies and allow for a more precise analysis and design of such structures. Suggestions about the numerical analysis of such problems are also presented. The results can be used also for quay and retaining walls.

Experiments to characterize the effects of moisture content and temperature on the mechanical properties of concrete were conducted. Based on these experiments, a new overall material model capable of predicting the mechanical behaviour of concrete subject to elevated temperatures up to 100 °C was developed. The material model estimates the time, temperature and moisture dependency of the compressive and tensile strength, creep and shrinkage of concrete.

fib Model Code 2010 represents the state-of-the-art of code-type models for structural behaviour of concrete. It comprises constitutive relations and material models together with the most important explanatory notes. However the underlying normative work, i.e. the fundamental data as well as the considerations and discussions behind the formulas could not be given within the Model Code text. Based on various experiences gained after the publication of Model Code 1990 this lacking background information will lead in the following to numerous questions arising from Model Code users. Consequently the present bulletin claims to conquer this general weakness of codes in a way to guard against any future misunderstandings of the Model Code 2010 related to its chapter 5.1 (Concrete). It discusses the given formulas in connection with experimental data and the most important international literature. The constitutive relations or material models, being included in MC1990 and forming the basis and point of origin of the Task Group’s work, were critically evaluated, if necessary and possible adjusted, or replaced by completely new approaches. Major criteria have been the physical and thermodynamical soundness as well as practical considerations like simplicity and operationality. This state-of-the-art report is intended for practicizing engineers as well as for researchers and represents a comprehensible summary of the relevant knowledge available to the members of the fib Task Group 8.7 at the time of its drafting. Besides the fact that the bulletin is a background document for Chapter 5.1 of MC2010, it will provide an important foundation for the development of future generations of code-type models related to the characteristics and the behaviour of structural concrete. Further it will offer insights into the complexity of the normative work related to concrete modelling, leading to a better understanding and adequate appreciation of MC2010.

Presents the proceedings of the 5th RILEM International Symposium, held in Barcelona in September 1993. The papers discuss creep and shrinkage of concrete, and should be of interest to cement and concrete technologists and researchers, as well as structural engineers.