This highly illustrated manual provides practical guidance on structural steelwork detailing. It: describes the common structural shapes in use and how they are joined to form members and complete structures explains detailing practice and conventions provides detailing data for standard sections, bolts and welds emphasises the importance of tolerances in order to achieve proper site fit-up discusses the important link between good detailing and construction costs Examples of structures include single and multi-storey buildings, towers and bridges. The detailing shown will be suitable in principle for fabrication and erection in many countries, and the sizes shown will act as a guide to preliminary design. The second edition has been updated to take account of changes to standards, including the revisions to BS5950 and includes a new chapter on computer aided detailing.

This highly illustrated manual provides practical guidance on structural steelwork detailing. It: describes the common structural shapes in use and how they are joined to form members and complete structures explains detailing practice and conventions provides detailing data for standard sections, bolts and welds emphasises the importance of tolerances in order to achieve proper site fit-up discusses the important link between good detailing and construction costs Examples of structures include single and multi-storey buildings, towers and bridges. The detailing shown will be suitable in principle for fabrication and erection in many countries, and the sizes shown will act as a guide to preliminary design. The second edition has been updated to take account of changes to standards, including the revisions to BS5950 and includes a new chapter on computer aided detailing.

A major problem in the use of structural steelwork is the lack of sufficient design and detailing expertise. This manual aims to provide a comprehensive introduction to producing tender and working drawings for the fabrication of structural steelwork.

This classic manual for structural steelwork design was first published in 1956. Since then, it has sold many thousands of copies worldwide. The fifth edition is the first major revision for 20 years and is the first edition to be fully based on limit state design, now used as the primary design method, and on the UK code of practice, BS 5950. It provides, in a single volume, all you need to know about structural steel design.

In 2010 the then current European national standards for building and construction were replaced by the EN Eurocodes, a set of pan-European model building codes developed by the European Committee for Standardization. The Eurocodes are a series of 10 European Standards (EN 1990 – EN 1999) that provide a common approach for the design of buildings, other civil engineering works and construction products. The design standards embodied in these Eurocodes will be used for all European public works and are set to become the de-facto standard for the private sector in Europe, with probable adoption in many other countries. This classic manual on structural steelwork design was first published in 1955, since when it has sold many tens of thousands of copies worldwide. For the seventh edition of the Steel Designers' Manual all chapters have been comprehensively reviewed, revised to ensure they reflect current approaches and best practice, and brought in to compliance with EN 1993: Design of Steel Structures (the so-called Eurocode 3).

This highly illustrated manual provides practical guidance on structural steelwork detailing. It: · describes the common structural shapes in use and how they are joined to form members and complete structures · explains detailing practice and conventions · provides detailing data for standard sections, bolts and welds · emphasises the importance of tolerances in order to achieve proper site fit-up · discusses the important link between good detailing and construction costs Examples of structures include single and multi-storey buildings, towers and bridges. The detailing shown will be suitable in principle for fabrication and erection in many countries, and the sizes shown will act as a guide to preliminary design. The third edition has been revised to take account of the new Eurocodes on structural steel work, together with their National Annexes. The new edition also takes account of developments in 3-D modelling techniques and it includes more CAD standard library details.