Praise for the First Edition " . . . an excellent addition to an upper-level undergraduate course on environmental statistics, and . . . a 'must-have' desk reference for environmental practitioners dealing with censored datasets." —Vadose Zone Journal Statistics for Censored Environmental Data Using Minitab® and R, Second Edition introduces and explains methods for analyzing and interpreting censored data in the environmental sciences. Adapting survival analysis techniques from other fields, the book translates well-established methods from other disciplines into new solutions for environmental studies. This new edition applies methods of survival analysis, including methods for interval-censored data to the interpretation of low-level contaminants in environmental sciences and occupational health. Now incorporating the freely available R software as well as Minitab® into the discussed analyses, the book features newly developed and updated material including: A new chapter on multivariate methods for censored data Use of interval-censored methods for treating true nondetects as lower than and separate from values between the detection and quantitation limits ("remarked data") A section on summing data with nondetects A newly written introduction that discusses invasive data, showing why substitution methods fail Expanded coverage of graphical methods for censored data The author writes in a style that focuses on applications rather than derivations, with chapters organized by key objectives such as computing intervals, comparing groups, and correlation. Examples accompany each procedure, utilizing real-world data that can be analyzed using the Minitab® and R software macros available on the book's related website, and extensive references direct readers to authoritative literature from the environmental sciences. Statistics for Censored Environmental Data Using Minitab® and R, Second Edition is an excellent book for courses on environmental statistics at the upper-undergraduate and graduate levels. The book also serves as a valuable reference for??environmental professionals, biologists, and ecologists who focus on the water sciences, air quality, and soil science.

STATISTICS IN PRACTICE Statistical methods for interpreting and analyzing censored environmental data Nondetects And Data Analysis: Statistics for Censored Environmental Data provides solutions for environmental scientists and professionals who need to interpret and analyze data that fall below the laboratory detection limit. Adapting survival analysis methods that have been successfully used in medical and industrial research, the author demonstrates, for the first time, their practical applications for studies of trace chemicals in air, water, soils, and biota. Readers quickly become proficient in these methods through the use of real-world examples that are solved using MINITAB® Release 14, a popular statistical software package, as well as other commonly used software packages. Everything needed to master these innovative statistical methods is provided, including: Accompanying Web site featuring answers to book exercises and datasets, as well as MINITAB® macros to perform methods, which are not available in the commercial version Methods for data with multiple detection limits Solutions for research studies in which all data are below detection limits Techniques for constructing confidence, prediction, and tolerance intervals for data with nond-tects Methods for data with multiple detection limits Chapters are organized by objective, such as computing intervals, comparing groups, and correlations, which enables readers to more easily apply the text to their particular research and goals. Extensive references to the literature for more in-depth research are provided; however, the text itself avoids complex math and calculus making it accessible to anyone in the environmental sciences. Environmental scientists and professionals will find the hands-on guidance and practical examples invaluable.

This book describes EnvStats, a new comprehensive R package for environmental statistics and the successor to the S-PLUS module EnvironmentalStats for S-PLUS (first released in 1997). EnvStats and R provide an open-source set of powerful functions for performing graphical and statistical analyses of environmental data, bringing major environmental statistical methods found in the literature and regulatory guidance documents into one statistical package, along with an extensive hypertext help system that explains what these methods do, how to use these methods, and where to find them in the environmental statistics literature. EnvStats also includes numerous built-in data sets from regulatory guidance documents and the environmental statistics literature. This book shows how to use EnvStats and R to easily: * graphically display environmental data * plot probability distributions * estimate distribution parameters and construct confidence intervals on the original scale for commonly used distributions such as the lognormal and gamma, as well as do this nonparametrically * estimate and construct confidence intervals for distribution percentiles or do this nonparametrically (e.g., to compare to an environmental protection standard) * perform and plot the results of goodness-of-fit tests * compute optimal Box-Cox data transformations * compute prediction limits and simultaneous prediction limits (e.g., to assess compliance at multiple sites for multiple constituents) * perform nonparametric estimation and test for seasonal trend (even in the presence of correlated observations) * perform power and sample size computations and create companion plots for sampling designs based on confidence intervals, hypothesis tests, prediction intervals, and tolerance intervals * deal with non-detect (censored) data * perform Monte Carlo simulation and probabilistic risk assessment * reproduce specific examples in EPA guidance documents EnvStats combined with other R packages (e.g., for spatial analysis) provides the environmental scientist, statistician, researcher, and technician with tools to “get the job done!”

Data on water quality and other environmental issues are being collected at an ever-increasing rate. In the past, however, the techniques used by scientists to interpret this data have not progressed as quickly. This is a book of modern statistical methods for analysis of practical problems in water quality and water resources.The last fifteen years have seen major advances in the fields of exploratory data analysis (EDA) and robust statistical methods. The 'real-life' characteristics of environmental data tend to drive analysis towards the use of these methods. These advances are presented in a practical and relevant format. Alternate methods are compared, highlighting the strengths and weaknesses of each as applied to environmental data. Techniques for trend analysis and dealing with water below the detection limit are topics covered, which are of great interest to consultants in water-quality and hydrology, scientists in state, provincial and federal water resources, and geological survey agencies.The practising water resources scientist will find the worked examples using actual field data from case studies of environmental problems, of real value. Exercises at the end of each chapter enable the mechanics of the methodological process to be fully understood, with data sets included on diskette for easy use. The result is a book that is both up-to-date and immediately relevant to ongoing work in the environmental and water sciences.

Fundamentals of Environmental Sampling and Analysis A fully reworked and updated introduction to the fundamentals and applications of environmental sampling and analysis Environmental sampling and analysis are essential components of environmental data acquisition and scientific research. The acquisition of reliable data with respect to proper sampling, chemical and instrumental methodology, and QA/QC is a critical precursor to all environmental work. No would-be environmental scientist, engineer, or policymaker can succeed without an understanding of how to correctly acquire, assess and use credible data. Fundamentals of Environmental Sampling and Analysis, 2nd edition provides this understanding, with a comprehensive survey of the theory and applications of these critical sampling and analytical tools. The field of environmental research has expanded greatly since the publication of the first edition, and this book has been completely rewritten to reflect the latest studies and technological developments. The resulting mix of theory and practice will continue to serve as the standard introduction to the subject. Readers of the second edition of Fundamentals of Environmental Sampling and Analysis will also find: Three new chapters and numerous expanded sections on topics of emerging environmental concerns Detailed discussion of subjects including passive sampling, Raman spectroscopy, non-targeted mass spectroscopic analysis, and many more Over 500 sample problems and solutions along with other supplementary instructional materials Fundamentals of Environmental Sampling and Analysis is ideal for students of environmental science and engineering as well as professionals and regulators for whom reliable environmental data through sampling and analysis is critical.

A practical guide to network meta-analysis with examples and code In the evaluation of healthcare, rigorous methods of quantitative assessment are necessary to establish which interventions are effective and cost-effective. Often a single study will not provide the answers and it is desirable to synthesise evidence from multiple sources, usually randomised controlled trials. This book takes an approach to evidence synthesis that is specifically intended for decision making when there are two or more treatment alternatives being evaluated, and assumes that the purpose of every synthesis is to answer the question "for this pre-identified population of patients, which treatment is 'best'?" A comprehensive, coherent framework for network meta-analysis (mixed treatment comparisons) is adopted and estimated using Bayesian Markov Chain Monte Carlo methods implemented in the freely available software WinBUGS. Each chapter contains worked examples, exercises, solutions and code that may be adapted by readers to apply to their own analyses. This book can be used as an introduction to evidence synthesis and network meta-analysis, its key properties and policy implications. Examples and advanced methods are also presented for the more experienced reader. Methods used throughout this book can be applied consistently: model critique and checking for evidence consistency are emphasised. Methods are based on technical support documents produced for NICE Decision Support Unit, which support the NICE Methods of Technology Appraisal. Code presented is also the basis for the code used by the ISPOR Task Force on Indirect Comparisons. Includes extensive carefully worked examples, with thorough explanations of how to set out data for use in WinBUGS and how to interpret the output. Network Meta-Analysis for Decision Making will be of interest to decision makers, medical statisticians, health economists, and anyone involved in Health Technology Assessment including the pharmaceutical industry.

This book covers the aspects of R most often used by statistical analysts. Incorporating the use of RStudio and the latest R packages, this second edition offers new chapters on simulation, special topics, and case studies. It reorganizes and enhances the chapters on data input and output, data management, statistical and mathematical functions, programming, high-level graphics plots, and the customization of plots. It also provides a detailed discussion of the philosophy and use of the knitr and markdown packages for R.