Carbon Pollution Emission Guidelines for Existing Stationary Sources - Electric Utility Generating Units (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) The Law Library presents the complete text of the Carbon Pollution Emission Guidelines for Existing Stationary Sources - Electric Utility Generating Units (US Environmental Protection Agency Regulation) (EPA) (2018 Edition). Updated as of May 29, 2018 In this action, the Environmental Protection Agency (EPA) is establishing final emission guidelines for states to follow in developing plans to reduce greenhouse gas (GHG) emissions from existing fossil fuel-fired electric generating units (EGUs). Specifically, the EPA is establishing: Carbon dioxide (CO 2) emission performance rates representing the best system of emission reduction (BSER) for two subcategories of existing fossil fuel-fired EGUs-fossil fuel-fired electric utility steam generating units and stationary combustion turbines; state-specific CO 2 goals reflecting the CO 2 emission performance rates; and guidelines for the development, submittal and implementation of state plans that establish emission standards or other measures to implement the CO 2 emission performance rates, which may be accomplished by meeting the state goals. This final rule will continue progress already underway in the U.S. to reduce CO 2 emissions from the utility power sector. This book contains: - The complete text of the Carbon Pollution Emission Guidelines for Existing Stationary Sources - Electric Utility Generating Units (US Environmental Protection Agency Regulation) (EPA) (2018 Edition) - A table of contents with the page number of each section

"This study is a resource and environmental profile analysis (REPA) of nine beverage container options. The analysis encompassed seven different parameters: virgin raw materials use, energy use, water use, industrial sold wastes, post-consumer solid wastes, air pollutant emissions and water pollutant effluents. These parameters were assessed for each manufacturing and transportation step in the life cycle of a container, beginning with extraction of the raw materials from the earth, continuing through the materials processing steps, product fabrication, use and final disposal. The nine container systems encompass four basic raw materials: glass, steel, aluminum and plastic. A fifth basic material is also included in packaging of the containers; this material is paper.--P. 1.

The social cost of carbon (SC-CO2) is an economic metric intended to provide a comprehensive estimate of the net damages - that is, the monetized value of the net impacts, both negative and positive - from the global climate change that results from a small (1-metric ton) increase in carbon-dioxide (CO2) emissions. Under Executive Orders regarding regulatory impact analysis and as required by a court ruling, the U.S. government has since 2008 used estimates of the SC-CO2 in federal rulemakings to value the costs and benefits associated with changes in CO2 emissions. In 2010, the Interagency Working Group on the Social Cost of Greenhouse Gases (IWG) developed a methodology for estimating the SC-CO2 across a range of assumptions about future socioeconomic and physical earth systems. Valuing Climate Changes examines potential approaches, along with their relative merits and challenges, for a comprehensive update to the current methodology. This publication also recommends near- and longer-term research priorities to ensure that the SC- CO2 estimates reflect the best available science.