This unique handbook provides a detailed breakdown of the labour content of the fabrication of offshore structures and pre-assembled units. Compiled from data drawn from a wide range of projects by one of the leading consultancies in the offshore industry, the book will be an essential industrial reference.

"The U.S. Department of the Interior's Bureau of Ocean Energy Management, Regulation, and Enforcement (BOEMRE) is responsible for the orderly, safe, and environmentally responsible development of offshore renewable energy on the outer continental shelf (OCS). The Committee on Offshore Wind Energy Turbine Structural and Operating Safety that authored this report was tasked with reviewing BOEMRE's proposed approach to overseeing the design of offshore wind turbines for structural integrity. The committee was asked to review the applicability and adequacy of standards and practices that could be used for the design, fabrication and installation of offshore wind turbines. It was also asked to review the role of third-party certified verification agents (CVAs) and the expertise and qualifications needed to carry out the role of a CVA. The committee's findings are presented in the following chapters: (1) Introduction; (2) Offshore Wind Technology and Status; (3) Standards and Practices; (4) A Risk-Informed Approach to Performance Assurance; (5) Role of Third-Party Oversight and Certified Verification Agents; (6) Qualifications Needed by Certified Verification Agents; and (7) Summary of Key Findings and Recommendations."--Pub. desc.

Piping and Pipeline Calculations Manual, Second Edition provides engineers and designers with a quick reference guide to calculations, codes, and standards applicable to piping systems. The book considers in one handy reference the multitude of pipes, flanges, supports, gaskets, bolts, valves, strainers, flexibles, and expansion joints that make up these often complex systems. It uses hundreds of calculations and examples based on the author's 40 years of experiences as both an engineer and instructor. Each example demonstrates how the code and standard has been correctly and incorrectly applied. Aside from advising on the intent of codes and standards, the book provides advice on compliance. Readers will come away with a clear understanding of how piping systems fail and what the code requires the designer, manufacturer, fabricator, supplier, erector, examiner, inspector, and owner to do to prevent such failures. The book enhances participants' understanding and application of the spirit of the code or standard and form a plan for compliance. The book covers American Water Works Association standards where they are applicable. - Updates to major codes and standards such as ASME B31.1 and B31.12 - New methods for calculating stress intensification factor (SIF) and seismic activities - Risk-based analysis based on API 579, and B31-G - Covers the Pipeline Safety Act and the creation of PhMSA