"Spillover and Mobility of Species and Solid Surfaces" collects the papers which were presented at the Fifth International Conference Spillover, either as oral or poster contributions, as well as the summaries of the invited lectures. This congress and its publication in the Studies on Surface Science and Catalysis series follow the tradition of previous conferences on spillover, initiated in Lyon, 1983, and continued in Leipzig, 1989, Kyoto 1993 and Dalian, 1997. For the fifth conference, held in S.L. el Escorial (Madrid), the organising committee has attempted to compile representative contributions which illustrate the advances in understanding the spillover phenomenon since 1997. Spillover is a process taking place during the interface of gas reactant molecules (mainly hydrogen and oxygen) on solid surfaces. However, different contributions to the more general area of the chemistry at surfaces, related with the mobility and migration of species, diffusion through membranes, fuel cell catalysts, etc., have also been included. In fact the title of the present volume summarizes this attempt to extend the conference topics towards dynamics at surfaces.Among the 70 contributions received, the 56 accepted papers were selected on the basis of the reports of at least two international reviewers, according to standards comparable to those applied for other specialised journals. These papers are from 21 different countries.

The 7th International Symposium on the Characterization of Porous Solids (COPS-VII) was held in the Congress Centre in Aix-en-Provence between the 25th-28th May 2005. The symposium covered recent results of fundamental and applied research on the characterization of porous solids. Papers relating to characterization methods such as gas adsorption and liquid porosimetry, X-ray techniques and microscopic measurements as well as the corresponding molecular modelling methods were given. These characterization methods were shown to be applied to all types of porous solids such as clays, carbons, ordered mesoporous materials, porous glasses, oxides, zeolites and metal organic frameworks. * 36 oral presentations and 166 posters and around 230 guests from 27 countries. * A large part of this symposium was devoted to the use computational methods to characterise porous solids

Biocatalysis in Oil Refining focuses on petroleum refining bioprocesses, establishing a connection between science and technology.The micro organisms and biomolecules examined for biocatalytic purposes for oil refining processes are thoroughly detailed. Terminology used by biologists, chemists and engineers is brought into a common language, aiding the understanding of complex biological-chemical-engineering issues. Problems to be addressed by the future R&D activities and by new technologies are described and summarized in the last chapter. * Updated references * Studying bioprocessing problems, looking at opportunities for improvements and technology developments

Introduction to Zeolite Molecular Sieves, 3rd Edition presents a collection of the most important results and ideas in the field of molecular sieve chemistry and technology, the most important experimental techniques related to the research activities in molecular sieves, and identifies new areas of molecular sieve chemistry. Chapters start at a reasonably simple entry level, but also covers the present state-of-the-art in the field. Topics covered include structure, synthesis, characterization, ion exchange, adsorption, diffusion, separations, and natural zeolites. * 6 years since the last edtion this book brings together the rapid development within the field of molecular sieve chemistry and applications * Accessible to newcomers to the field, also containing valuable information for experienced researchers * 27 chapters written by renowned scientists in their field, including updates on some 2nd edition chapters

Unsteady-state operations of catalytic reactors provide plentiful opportunities for research and commercial realization of efficient heterogeneous catalytic processes. Forced unsteady state conditions generate unique distributions of process parameters and catalyst states often unattainable with traditional, steady-state operation. The unsteady-states can be created by periodic changes in input flow parameters, such as changes in inlet temperature and composition, catalyst circulation through reaction and regeneration zones, or periodic flow reversals through fixed catalyst bed. This can result in increased productivity, selectivity, capital savings and operating cost reduction (higher energy efficiency). Efficient environmental technologies for treatment of toxic emissions, acid rain and greenhouse gas emissions can also be developed using the unsteady-state concept. The Proceedings communicate recent progress in these areas of research and promote future development. The aims are to establish relations between academia, industry, engineers and scientists from all over the world, to stimulate new catalytic technologies as well as fundamental research, and to create new concepts for the development of effective catalytic systems. It presents the most up-to-date research in catalysis. - contains the most recent developments in catalytic research - includes research finding as well as their application to industry - a thorough source of information on the latest developments of industrial catalysis in Japan

This volume contains peer-reviewed manuscripts describing the scientific and technological advances presented at the 8th Natural gas Conversion Symposium held in Natal-Brazil, May 27-31, 2007. This symposium continues the tradition of excellence and the status as the premier technical meeting in this area established by previous meetings. The manuscripts have been divided into eight different topics, Industrial Processes, Economics, Technology Demonstration and Commercial Activities;, Production of Hydrogen from Methane, Methanol, and Other Sources; Production of Synthesis; Fischer-Tropsch Synthesis of Hydrocarbons; From Synthesis Gas to; Catalytic Combustion; From Natural Gas to Chemicals; Light Hydrocarbons; and Production and Conversion. These are the most interesting subjects in the utilization of natural gas with recent scientific innovation and technological advances. The book is of interest to all students and researchers active in utilization of natural gas. * Research comes from the most important industries and research centres in the field * Features new studies from all around the world * Important for consulting and updating research and development data

Since 1987, the Petroleum Division of the American Chemical Society (ACS) has sponsored at 3 year intervals an international symposium on fluid cracking catalysts (FCC) technology. This volume collects the recent progress of this technology as reported in the papers presented during the 232th National Meeting of the ACS in San Francisco, September 10-14, 2006.Sixty-six years after the introduction of the fluid cracking catalyst process, it remains the main process of gasoline generation for the estimated 237 millions cars on US roads. Catalysts testing and evaluation still remains a subject of interest, debate and controversy. Lambda sweep testing, testing of SOx, NOx and combustion promoters have been discussed in details together with catalyst evaluation for atmospheric residues and metal contaminated oils cracking.Of particular interest has been the introduction of novel concept in process design aimed at improving cracked product selectivity such as two-stage risers for better gasoline and olefins production and downer technology for high severity processes . The importance of solid state nuclear magnetic resonance (NMR) in the study of crude oils, catalysts and reaction products are illustrated by several examples. Two contributions describe the use of predictive methods to understand FCC aging and deactivationand personal overviews of the development of SOx and combustion promoters technology are presented. * Presents findings from the tri-annual international symposium on fluid cracking catalysts (FCC) technology, sponsored by the Petroleum Division of the American Chemical Society (ACS) * Two contributions describe the use of predictive methods to understand FCC aging and deactivation* Personal overviews by the authors of the development of SOx and combustion promoters technology