Build high-performance, spectrally clean, energy-efficient mm-wave power amplifiers and transmitters with this cutting-edge guide to designing, modeling, analysing, implementing and testing new mm-wave systems. Suitable for students, researchers and practicing engineers, this self-contained guide provides in-depth coverage of state-of-the-art semiconductor devices and technologies, linear and nonlinear power amplifier technologies, efficient power combining systems, circuit concepts, system architectures and system-on-a-chip realizations. The world's foremost experts from industry and academia cover all aspects of the design process, from device technologies to system architectures. Accompanied by numerous case studies highlighting practical design techniques, tradeoffs and pitfalls, this is a superb resource for those working with high-frequency systems.

This book describes algorithmic methods and hardware implementations that aim to help realize the promise of Compressed Sensing (CS), namely the ability to reconstruct high-dimensional signals from a properly chosen low-dimensional “portrait”. The authors describe a design flow and some low-resource physical realizations of sensing systems based on CS. They highlight the pros and cons of several design choices from a pragmatic point of view, and show how a lightweight and mild but effective form of adaptation to the target signals can be the key to consistent resource saving. The basic principle of the devised design flow can be applied to almost any CS-based sensing system, including analog-to-information converters, and has been proven to fit an extremely diverse set of applications. Many practical aspects required to put a CS-based sensing system to work are also addressed, including saturation, quantization, and leakage phenomena.

Low Power Consumption is one of the critical issues in the performance of small battery-powered handheld devices. Mobile terminals feature an ever increasing number of wireless communication alternatives including GPS, Bluetooth, GSM, 3G, WiFi or DVB-H. Considering that the total power available for each terminal is limited by the relatively slow increase in battery performance expected in the near future, the need for efficient circuits is now critical. This book presents the basic techniques available to design low power RF CMOS analogue circuits. It gives circuit designers a complete guide of alternatives to optimize power consumption and explains the application of these rules in the most common RF building blocks: LNA, mixers and PLLs. It is set out using practical examples and offers a unique perspective as it targets designers working within the standard CMOS process and all the limitations inherent in these technologies.

Nowadays over 50% of integrated circuits are fabricated at wafer foundries. This book presents a foundry-integrated perspective of the field and is a comprehensive and up-to-date manual designed to serve process, device, layout, and design engineers. It comprises chapters carefully selected to cover topics relevant for them to deal with their work. The book provides an insight into the different types of design rules (DRs) and considerations for setting new DRs. It discusses isolation, gate patterning, S/D contacts, metal lines, MOL, air gaps, and so on. It explains in detail the layout rules needed to support advanced planarization processes, different types of dummies, and related utilities as well as presents a large set of guidelines and layout-aware modeling for RF CMOS and analog modules. It also discusses the layout DRs for different mobility enhancement techniques and their related modeling, listing many of the dedicated rules for static random-access memory (SRAM), embedded polyfuse (ePF), and LogicNVM. The book also provides the setting and calibration of the process parameters set and describes the 28~20 nm planar MOSFET process flow for low-power and high-performance mobile applications in a step-by-step manner. It includes FEOL and BEOL physical and environmental tests for qualifications together with automotive qualification and design for automotive (DfA). Written for the professionals, the book belongs to the bookshelf of microelectronic discipline experts.

This book enables readers to design effective ESD protection solutions for all mainstream RF fabrication processes (GaAs pHEMT, SiGe HBT, CMOS). The new techniques introduced by the authors have much higher protection levels and much lower parasitic effects than those of existing ESD protection devices. The authors describe in detail the ESD phenomenon, as well as ESD protection fundamentals, standards, test equipment, and basic design strategies. Readers will benefit from realistic case studies of ESD protection for RFICs and will learn to increase significantly modern RFICs’ ESD safety level, while maximizing RF performance.

This book fills an information gap on cognitive radios, since the discussion focuses on the implementation issues that are unique to cognitive radios and how to solve them at both the architecture and circuit levels. This is the first book to describe in detail cognitive radio systems, as well as the circuit implementation and architectures required to implement such systems. Throughout the book, requirements and constraints imposed by cognitive radio systems are emphasized when discussing the circuit implementation details. This is a valuable reference for anybody with background in analog and radio frequency (RF) integrated circuit design, needing to learn more about integrated circuits requirements and implementation for cognitive radio systems.

Taking an in-depth look at the mobile communications ecosystem, this book covers the two key components, i.e., Network and End-User Devices, in detail. Within the network, the sub components of radio access network, transmission network, core networks, services and OSS are discussed; component level discussion also features antenna diversity and interference cancellation techniques for smart wireless devices. The role of various standard development organizations and industry forums is highlighted throughout. The ecosystem is strengthened with the addition of the Technology Management (TM) component dealing mostly with the non-technical aspects of the underlying mobile communications industry. Various aspects of TM including technology development, innovation management, knowledge management and more are also presented. Focuses on OFDM-based radio technologies such as LTE & WiMAX as well as MBWA (Mobile Broadband Wireless Access) Provides a vital addition to the momentum of EVDO and its migration towards LTE Emphasis on radio, core, operation, architectural and performance aspects of two next generation technologies - EPS and WiMAX Includes discussion of backhaul technologies and alternatives as well as issues faced by operators switching to 3G and Next Generation Mobile Networks Cutting-edge research on emerging Gigabit Ethernet Microwave Radios and Carrier Ethernet transport technologies Next Generation Mobile Communications Ecosystem serves as a practical reference for telecom associated academia and industry to understanding mobile communications in a holistic manner, as well as assisting in preparing graduate students and fresh graduates for the marketplace by providing them with information not only on state-of-the-art technologies and standards but also on TM. By effectively focusing on the key domains of TM this book will further assist companies with improving their competitiveness in the long run. Importantly, it will provide students, engineers, researchers, technology managers and executives with extensive details on various emerging mobile wireless standards and technologies.