With the gradual development of rules for designing against instability the idea emerged, in London, in 1974 to hold an International Colloquium treating every aspect of structural instability of steel structures. There have been 17 International Colloquia Stability Sessions around the world, starting with the first one in Paris in 1972, until with the last one in Nagoya in 1997. In Nagoya it was decided to continue the series of travelling colloquia by launching the Sixth Colloquium in September 1999 with the First Session to be held at the "Politehnica" University of Timişoara, România, which will be followed by another in the year 2000 at the Gediminas Technical University in Vilnius, Lithuania, a third one during SSRC's Year 2000 Annual Meeting in the US, and a fourth one in Australia or New Zealand. At present important research projects are in progress around the world, like SAC Joint Venture Project in USA, INCO-COPERNICUS "RECOS" in Europe and others, which are devoted to improve and develop new methods for the safety design of steel structures in seismic zones. Special attention is paid in Europe, USA and Japan to improve the design codes and detailing of seismic resistant steel structures. This was the reason to organise the Session of Nagoya as "Stability and Ductility of Steel Structures" Colloquium. Romania is also a strong seismic territory and therefore, the topic of the Timişoara Session covered both stability and ductility problems. The technical programme of the SDSS'99 Colloquium in Timişoara has been split into nine working sessions.

For more than forty years the series of International Colloquia on Stability and Ductility of Steel Structures has been supported by the Structural Stability Research Council (SSRC). Its objective is to present the latest results in theoretical, numerical and experimental research in the area of stability and ductility of steel and steel-concrete composite structures. In Stability and Ductility of Steel Structures 2019, the focus is on new concepts and procedures concerning the analysis and design of steel structures and on the background, development and application of rules and recommendations either appearing in recently published Codes or Specifications and in emerging versions, all in anticipation of the new edition of Eurocodes. The series of International Colloquia on Stability and Ductility of Steel Structures started in Paris in 1972, the last five being held in: Timisoara, Romania (1999), Budapest, Hungary (2002), Lisbon, Portugal (2006), Rio de Janeiro, Brazil (2010) and Timisoara, Romania (2016). The 2019 edition of SDSS is organized by the Czech Technical University in Prague.

Papers from a September 2002 meeting summarize progress in theoretical and experimental research in the stability and ductility of steel and other metal structures, with special emphasis given to new concepts of analysis, design rules, and recommendations in recent national and international design specification codes. Some themes include bridges and special problems, composite structures, and earthquake and fire. The editor teaches structural engineering at Budapest University of Technology and Economics. The book is distributed in the US by ISBS. Annotation (c)2003 Book News, Inc., Portland, OR (booknews.com).

The near-field earthquake which struck the Hanshin-Awaji area of Japan before dawn on January 17, 1995, in addition to snatching away the lives of more than 6,000 people, inflicted horrendous damage on the region's infrastructure, including the transportation, communication and lifeline supply network and, of course, on buildings, too. A year earlier, the San Fernando Valley area of California had been hit by another near-field quake, the Northridge Earthquake, which dealt a similarly destructive blow to local infrastructures. Following these two disasters, structural engineers and researchers around the world have been working vigorously to develop methods of design for the kind of structure that is capable of withstanding not only the far-field tectonic earthquakes planned for hitherto, but also the full impact of near-field earthquake.Of the observed types of earthquake damage to steel structures, there are some whose causes are well understood, but many others continue to present us with unresolved problems. To overcome these, it is now urgently necessary for specialists to come together and exchange information.The contents of this volume are selected from the Nagoya Colloquium proceedings will become an important part of the world literature on structural stability and ductility, and will prove a driving force in the development of future stability and ductility related research and design.

The aim of this book is to review recent research and technical advances, including the progress in design codes, related to the engineering applications of light gauge metal sections made in carbon, high strength and stainless steel, as well as aluminium alloys. Included is a review of the new technologies for connections of light gauge metal members. Main advanced applications, for residential, non residential and industrial buildings and pallet rack systems are also covered. For the first time, this book takes into account all the metallic materials now used more and more for structural components. The book will be of great interest not only for researchers but also for design engineers faced to the use of new metallic materials in modern structural applications.

This book is a state-of-the-art report on the ductility of steel structures, containing a comprehensive review of the technical literature available, and presenting the results of the authors' own extensive research activities in this area. Analytical and numerical methods are described, and a wealth of practical information is provided. Ductility of Seismic-Resistant Steel Structures will be of great use to advanced students, researchers, designers and professionals in the field of civil, structural and earthquake engineering.