Wide direct band gap gallium nitride (GaN) semiconductor has received significant attention as an ideal material for various applications in the optoelectronic devices. One major use of GaN is the development of energy-efficient solid state light-emitting diodes. Currently, most commercially available GaN semiconductor are produced through advanced deposition techniques which involve sophisticated technologies and are relatively expensive and complicated to setup. As an alternative, the sol-gel spin coating method, which is relatively simpler, cheaper, safer, and more scalable was proposed. In this book, the process route and recipe for producing highly c-oriented crystalline GaN thin films via the sol-gel spin coating approach were described in detail. Some insights into the factors affecting the surface morphology as well as structural and optical properties of the deposited films were presented. Eventually, this book could inspire further studies into the development of low-cost GaN thin films.

Selected, peer reviewed papers from the 4th International Conference on Solid State Science and Technology, (ICSSST 2012), December 18-20, 2012, Melaka, Malaysia

Selected, peer reviewed papers from the 3rd International Conference and Exhibition on Sustainable Energy and Advanced Materials (ICE-SEAM 2013), October 30-31, 2013, Melaka, Malaysia

Sol-Gel Techniques for Glass Producers and Users provides technological information, descriptions and characterizations of prototypes, or products already on the market, and illustrates advantages and disadvantages of the sol-gel process in comparison to other methods. The first chapter entitled "Wet Chemical Technology" gives a summary of the basic principles of the sol-gel chemistry. The most promising applications are related to coatings. Chapter 2 describes the various "Wet Chemical Coating Technologies" from glass cleaning to many deposition and post-coating treatment techniques. These include patterning of coatings through direct or indirect techniques which have became very important and for which the sol-gel processing is particularly well adapted. Chapter 3 entitled "Bulk Glass Technologies" reports on the preparation of special glasses for different applications. Chapter 4 entitled "Coatings and Materials Properties" describes the properties of the different coatings and the sol-gel materials, fibers and powders. The chapter also includes a section dedicated to the characterization techniques especially applied to sol-gel coatings and products.