CD-ROM contains SPICE3 and ISPICE simulation models and examples from the book, allowing easy customization

Harness Powerful SPICE Simulation and Design Tools to Develop Cutting-Edge Switch-Mode Power Supplies Switch-Mode Power Supplies: SPICE Simulations and Practical Designs is a comprehensive resource on using SPICE as a power conversion design companion. This book uniquely bridges analysis and market reality to teach the development and marketing of state-of-the art switching converters. Invaluable to both the graduating student and the experienced design engineer, this guide explains how to derive founding equations of the most popular converters...design safe, reliable converters through numerous practical examples...and utilize SPICE simulations to virtually breadboard a converter on the PC before using the soldering iron. Filled with more than 600 illustrations, Switch-Mode Power Supplies: SPICE Simulations and Practical Designs enables you to: Derive founding equations of popular converters Understand and implement loop control via the book-exclusive small-signal models Design safe, reliable converters through practical examples Use SPICE simulations to virtually breadboard a converter on the PC Access design spreadsheets and simulation templates on the accompanying CD-ROM, with numerous examples running on OrCADË, ICAPSË, μCapË, TINAË, and more Inside This Powerful SPICE Simulation and Design Resource • Introduction to Power Conversion • Small-Signal Modeling • Feedback and Control Loops • Basic Blocks and Generic Models • Simulation and Design of Nonisolated Converters • Simulation and Design of Isolated Converters-Front-End Rectification and Power Factor Correction • Simulation and Design of Isolated Converters-The Flyback • Simulation and Design of Isolated Converters-The Forward

THE LATEST SPICE SIMULATION AND DESIGN TOOLS FOR CREATING STATE-OF-THE-ART SWITCHMODE POWER SUPPLIES Fully updated to incorporate new SPICE features and capabilities, this practical guide explains, step by step, how to simulate, test, and improve switch-mode power supply designs. Detailed formulas with founding equations are included. Based on the author's continued research and in-depth, handson work in the field, this revised resource offers a collection of the latest SPICE solutions to the most difficult problem facing power supply designers: creating smaller, more heat-efficient power supplies in shorter design cycles. NEW to this edition: Complete analysis of rms currents for the three basic cells in CCM and DCM PWM switch at work in the small-signal analysis of the DCM boost and the QR flyback OTA-based compensators Complete transistor-level TL431 model Small-signal analysis of the borderline-operated boost PFC circuit operated in voltage or current mode All-over power phenomena in QR or fixed-frequency discontinuous/continuous flyback converters Small-signal model of a QR flyback converter Small-signal model of the active clamp forward converter operated in voltagemode control Electronic content—design templates and examples available online Switch-Mode Power Supplies: SPICE Simulations and Practical Designs, Second Edition, covers: Small-signal modeling * Feedback and ciontrol loops * Basic blocks and generic switched models * Nonisolated converters * Off-line converters * Flyback converters * Forward converters * Power factor correction

A master-class in power supply design through circuit simulation This book/CD-ROM package covers every essential aspect of power supply design simulation and fully explains the fundamentals of SPICE 3 simulation techniques. CD-ROM contains SPICE3 and ISPICE simulation models and examples from the book, allowing easy customization

Chapter 1: The Principles of Switching Power Conversion Chapter 2: DC-DC Converter Design and Magnetics Chapter 3: Off-line Converter Design and Magnetics Chapter 4: The Topology FAQ Chapter 5: Optimal Core Selection Chapter 6: Component Ratings, Stresses, Reliability and Life Chapter 7: Optimal Power Components Selection Chapter 8: Conduction and Switching Losses Chapter 9: Discovering New Topologies Chapter 10: Printed Circuit Board Layout Chapter 11: Thermal Management Chapter 12: Feedback Loop Analysis and Stability Chapter 13: Paralleling, Interleaving and Sharing Chapter 14: The Front-End of AC-DC Power Supplies Chapter 15: DM and CM Noise in Switching Power Supplies Chapter 16: Fixing EMI across the Board Chapter 17: Input Capacitor and Stability Chapter 18: The Math behind the Electromagnetic Puzzle Chapter 19: Solved Examples Appendix A.