Now in an completely revised, updated, and enlarged Second Edition, Small Antennas in Portable Devices reviews recent significant theoretical and practical developments in the electrically small antenna area. Examining antenna designs that work as well as those that have limitations, this new edition provides practicing engineers and upper level and graduate students with new information on: work on improving bandwidth using spherical helix dipoles; work on electromagnetically coupled structures; exact derivation of the Q for electrically small antennas for both the TE and TM modes; and a new simplified Q formula.

If you are involved in designing and developing small antennas, this complete cutting-edge guide covers everything you need to know. From fundamentals and basic theory to design optimization, evaluation, measurements and simulation techniques, all the essential information is included. You will also get many practical examples from a range of wireless systems, whilst a glossary is provided to bring you up to speed on the latest terminology. A wide variety of small antennas is covered, and design and practice steps are described for each type: electrically small, functionally small, physically constrained small and physically small. Whether you are a professional in industry, a researcher, or a graduate student, this is your essential guide to small antennas.

As wireless devices and systems get both smaller and more ubiquitous, the demand for effective but small antennas is rapidly increasing. Small Antenna Design describes the theory behind effective small antenna design and give design techniques and examples for small antennas for different operating frequencies. Design techniques are given for the entire radio spectrum, from a very hundred kilohertz to the gigahertz range.Unlike other antenna books which are heavily mathematical and theoretical, Douglas Miron keeps mathematics to the absolute minimum required to explain design techniques. Ground planes, essential for operation of many antenna designs, are extensively discussed. - Author's extensive experience as a practicing antenna design engineer gives book a strong "hands-on" emphasis - Covers antenna design techniques from very low frequency (below 300 kHz) to microwave (above 1 GHz) ranges - Special attention is given to antenna design for mobile/portable applications such as cell phones, WiFi, etc

Tutorial in nature, this book is based on a series of papers presented at a workshop in Japan. It constitutes the first single-volume guide to the basic methods of analyzing microstrip patch antennas, and the characteristics of rectangular, circular and arbitrarily shaped patch antennas. Supported by 273 equations, tables and illustrations this book should prove a useful tool for anyone doing applied research in antennas.

A seminal reference to electrically small antennas for today's wireless and Wi-Fi world This book is dedicated to the challenges posed by electrically small antennas and their solutions. Electrically small antennas have characteristics that limit performance: low radiation resistance, high reactance, low efficiency, narrow bandwidth, and increased loss in the matching network. Most of these limitations are shared by two other classes of antennas: superdirective and superconducting antennas. All three classes of antennas are thoroughly treated in three interrelated parts: * Part One, Electrically Small Antennas, begins with a discussion of the fundamental limitations of bandwidth and matching, then provides detailed design information on loaded whips and dipoles, ferrite loops, patches with unusual substrates, and dielectric resonator antennas. In addition to exploring designs that work, the author sets forth antenna designs that are based on good physics yet are poor performers, as well as designs with both poor underlying physics and poor performance. * Part Two, Superdirective Antennas, sets forth basic capabilities and limitations of superdirective antennas, both apertures and arrays, and investigates bandwidth, efficiency, and tolerances. The author explores the magnification of intrinsic matching circuit loss due to a large mismatch and evaluates the recent and promising non-Foster matching circuits. * Part Three, Superconducting Antennas, reviews superconductivity concepts and new principles for dipole, loop, and patch antennas. The author concludes with a discussion of superconducting delay lines for wideband phased array steering. Throughout the book, the author provides readers with a historical perspective, setting forth what has been investigated, what works, and what does not. Each part has its own author index and a list of references to help readers continue their explorations of particular topics.With the explosive demand for wireless and Wi-Fi, this seminal reference is essential reading for all antenna professionals and is recommended as a graduate-level course book.

Presents an overview of CubeSat antennas designed at the Jet Propulsion Laboratory (JPL) CubeSats—nanosatellites built to standard dimensions of 10cm x 10 cm x cm—are making space-based Earth science observation and interplanetary space science affordable, accessible, and rapidly deployable for institutions such as universities and smaller space agencies around the world. CubeSat Antenna Design is an up-to-date overview of CubeSat antennas designed at NASA’s Jet Propulsion Laboratory (JPL), covering the systems engineering knowledge required to design these antennas from a radio frequency and mechanical perspective. This authoritative volume features contributions by leading experts in the field, providing insights on mission-critical design requirements for state-of-the-art CubeSat antennas and discussing their development, capabilities, and applications. The text begins with a brief introduction to CubeSats, followed by a detailed survey of low-gain, medium-gain, and high-gain antennas. Subsequent chapters cover topics including the telecommunication subsystem of Mars Cube One (MarCO), the enabling technology of Radar in a CubeSat (RainCube), the development of a one-meter mesh reflector for telecommunication at X- and Ka-band for deep space missions, and the design of multiple metasurface antennas. Written to help antenna engineers to enable new CubeSate NASA missions, this volume: Describes the selection of high-gain CubeSat antennas to address specific mission requirements and constraints for instruments or telecommunication Helps readers learn how to develop antennas for future CubeSat missions Provides key information on the effect of space environment on antennas to inform design steps Covers patch and patch array antennas, deployable reflectarray antennas, deployable mesh reflector, inflatable antennas, and metasurface antennas CubeSat Antenna Design is an important resource for antenna/microwave engineers, aerospace systems engineers, and advanced graduate and postdoctoral students wanting to learn how to design and fabricate their own antennas to address clear mission requirements.